Flywheel lock kit for Mercedes, Renault, Dacia

Timing lock Opel 1.2, 1.2L-T (RPO LIH)

Designed specifically for the Opel 1.2 1.2L-T (RPO LIH) engine, guaranteeing exact alignment and fit during use.

Product code: W0731

Camshaft lock for Mercedes A, E, S and Vito

Camshaft lock for Mercedes-Benz 1.8, 2.1 CDI engines from 2012 with code: 651. OEM: 651 589 00 40 00.

Product code: W0590

Shaft locking pin Volkswagen / Audi 2.0 / 2.4 / 3.2 FSI / 2.5 / 3.2 V6 TDI

This shaft locking pin is a precision-made tool crafted for aiding in the maintenance and repair of specific Volkswagen and Audi engines. 

Product code: W0431

Camshaft lock for Mercedes 2.0, 2.1, 2.2 CDI

A camshaft lock tool for Mercedes 2.0, 2.1, and 2.2 CDI engines is a specialized tool used to lock the camshafts in place during maintenance or repair procedures. These engines are commonly found in various Mercedes-Benz models.

Product code: W0386

Crankshaft locking pin Ford, Volvo, Mazda 1.25, 1.4, 1.6 Zetec, Duratec

Crankshaft locking pin Ford Fiesta, Focus, Volvo C30, S40, V50 Mazda 1.25, 1.4, 1.6 Zetec, Duratec engines.

Product code: W0406

Engine timing tool for Renault, Nissan (3.0 DCi)

This tool is designed for setting the valve timing of the 3.0dCi V9X timing chain engine. The utilization of this tool is essential for precise and reliable engine timing, ensuring optimal performance and efficiency of the engine.

Product code: MG91624

Crankshaft locking kit for Ford Transit 2.2 TDCi

By securing the crankshaft and flywheel in position, it ensures that the TDC (Top Dead Center) sensor can be accurately set, especially crucial after its removal when working on the cam chain drive system.

Product code: MG91722

Flywheel locking tool for 1.3 TCe engines

Flywheel locking tool for Mercedes-Benz 1.3M, Dacia, Nissan 1.3 TCe, Dacia 0.9, 1.6 petrol engines

Product code: C01/0262

Timing lock for Volvo V8 4.4l

Keep your Volvo V8 4.4l engine running smoothly with our timing lock. Prevent costly engine damage and ensure optimal performance.

Product code: W0659

Camshaft locking tool for Mercedes M271, C200, C180, E260

Use this tool to accurately position and align the TDC to fix the camshaft in the timed position (direct center), so that the cam phaser can be effectively removed while tightening and loosening the phaser bolt. (Note that the camshaft must be aligned when removing and installing the timing chain)

Product code: W0662

Engine timing tool set for Volvo (B4204 engine)

Specially designed timing tool set for Volvo B4204 engines, ensuring precise camshaft and crankshaft alignment. Suitable for Volvo models with 8-speed transmission.

Product code: MG90306

Engine timing tool set for Ford, Mazda, Volvo (1.25-2.3 petrol engines)

This is an essential toolkit designed to cater to a wide range of petrol engines, specifically in the 1.25 to 2.3 range. This set is an indispensable component for ensuring precise engine timing and synchronization, crucial for vehicle performance and longevity.

Product code: MG91605

Control clamping tool kit for Opel, Saab, Chevrolet, Fiat (1.6, 1.8 engines)

This control clamping tool kit is an essential toolkit for working on a wide range of vehicles powered by 1.6 and 1.8 engines from Opel, Saab, Chevrolet, and Fiat. It includes a two-piece camshaft locking tool that is specifically designed to fit between the camshaft pulleys.

Product code: MG91613CP

Engine timing tool set for Opel (1.3 CDTi engine)

Engine timing tool set for Opel 1.3 CDTi chain-driven engines, includes Crankshaft Pulley Hub Holding Tool and Camshaft Position Sensor Positioning Tool.

Product code: MG91621

Engine timing tools set for VAG (1.2 engine)

This 2-piece engine timing tools set is specifically designed for VAG 1.2L engines, commonly found in a variety of VW models. This toolkit facilitates accurate engine timing and maintenance, especially during timing belt replacements or engine rebuilds.

Product code: MG91628

Multi-position timing belt tensioner wrench for VAG engines

This multi-position timing belt tensioner wrench is specially designed for use on VAG engines. it is ensures facilitating easy adjustments and access to tighten the tensioner nut on both petrol and diesel engines. This tool is especially useful for working in tight engine spaces where standard wrenches may not reach or fit properly.

Product code: MG91629

Petrol engine camshaft setting tool for VAG (1.4, 1.6 16V/FSi engines)

This specialized camshaft setting tool is designed for vehicles in the VAG group, specifically tailored for 1.4 and 1.6 16V/FSi petrol engines, which feature a double overhead camshaft (DOHC) design. It is essential for engine maintenance and repair in models from Audi, Seat, Skoda, and VW, especially crucial for locking the camshaft pulleys during tasks like timing belt replacement.

Product code: MG91631

Camshaft locking tool set for VAG (3-cylinder 1.0 4V engines)

The Camshaft Locking Tool Set is a collection of tools specifically designed for alignment and timing tasks on Volkswagen Group's 3-cylinder 1.0 4V engines. The kit ensures that the camshaft is securely locked in the correct timing position during repair or maintenance work.

Product code: MG91636

Diesel engine locking set for VAG (1.2, 1.4, 1.9 belt driven engines)

This diesel engine locking set is designed for VAG (Volkswagen Auto Group) vehicles equipped with 1.2D, 1.4D, and 1.9D TDi PD (Pumpe Duse) engines featuring hydraulic belt tensioners.

Product code: MG91637

Balance shaft setting tool for Land Rover Evoque (2.0T engine)

This Balance Shaft Setting Tool is designed for performing precise balance adjustments on Land Rover Jaguar I4 engines. It is tailored specifically for the 2.0T engine found in models such as the Land Rover Evoque and compatible Jaguar vehicles, this tool facilitates the accurate setting of the balance shaft, a critical component in maintaining the engine's smooth operation and longevity.

Product code: MG91639

Engine timing tool set for VAG (TDi V6/V8 engines)

The engine timing tool set is used for locking the crankshaft and camshaft when working on engine timing tasks such as timing belt replacement, cylinder head disassembly, and more. This set is specifically designed for Audi / VW V6 2.5 TDi and Audi V8 3.3 TDi engines.

Product code: MG91654

Engine timing tool set for Audi (2.0, 2.8, 3.0 engines)

This comprehensive Engine Timing Tool Set is specifically designed for Audi vehicles, providing all the necessary tools for alignment, adjustment of the camshaft, and replacement of the timing chain.

Product code: MG91666

Engine timing tool set for VAG (2.4, 3.2, 4.2, 5.0, 5.2 engines)

This comprehensive engine timing tool set is expertly designed for a wide range of VAG engines, including 2.4, 3.2, 4.2, 5.0, and 5.2 variants. It is an indispensable kit for professionals working on Audi V6, V8, and V10 petrol engines, ensuring precision in camshaft and crank locking tasks.

Product code: MG91668

Engine timing tool set for Jaguar, Land Rover (2.0 petrol engine)

This specialized engine timing tool set is designed for the precise servicing of Jaguar and Land Rover vehicles with 2.0 petrol engines.

Product code: MG91675

Engine timing tool set for BMW, Mini (N14)

This comprehensive Engine Timing Tool Set is designed for setting the camshaft timing on the N14 turbocharged engine, prominently featured in the Mini Cooper S from 2007 to the present.

Product code: MG91697

Engine timing tool set for Jaguar, Land Rover (V8 5.0 engine)

This specialized engine timing tool set is precisely designed for the V8 5.0 engine found in select Jaguar and Land Rover models.

Product code: MG91702

Engine timing tool set for Jaguar, Land Rover (2.7 TDV6 engine)

This Engine Timing Tool Set is specifically designed for the 2.7 TDV6 engine, commonly found in select Jaguar and Land Rover models from 2004 to 2009.

Product code: MG91703

Engine timing tool set for BMW, Mini (N13/N18)

This Engine Timing Tool Set is designed for the BMW and Mini vehicles equipped with the N13 and N18 engines. This tool kit makes it easy to lock the camshaft in the TDC (Top Dead Center) position and to disassemble and reassemble the intake and exhaust camshafts.

Product code: MG91705

Engine timing tool set for Mercedes-Benz (M133/M270/M274)

This Engine Timing Tool Set is meticulously crafted for Mercedes-Benz vehicles equipped with the chain-driven 1.6/2.0 direct injection petrol engines. These engines are a staple in the latest A, B, CLA, C, and E Class vehicles, requiring precise timing adjustments for maintenance and repair.

Product code: MG91710

Mercedes-Benz camshaft pulley socket T100H, 1/2" square drive

This Mercedes-Benz Camshaft Pulley Socket, featuring a T100H profile and a 1/2" square drive, is an expertly designed tool specifically for correcting the position of the camshaft pulley on various Mercedes-Benz engines.

Product code: MG91712

Engine timing tool set for Mercedes-Benz (M651)

This engine timing tool set is specifically designed for Mercedes-Benz vehicles equipped with the chain-driven 1.8/2.1 CDI Diesel Engines, identified by the engine code prefix 651.xxx. The set includes tools necessary for accurately positioning the camshaft in the installed position and for the rotation, installation, and dismantling of the crankshaft pulley.

Product code: MG91725

Engine timing tool set for Mercedes-Benz (M651)

This Engine Timing Tool Set is specifically created for Mercedes-Benz vehicles equipped with the chain-driven 1.8/2.1 CDI diesel engines, identifiable by their 651.xxx engine codes.

Product code: MG91726

Engine timing tool set for Land Rover (3.6 TDV8 engine)

Engine timing tool set for Land Rover 3.6 TDV8 engines, ideal for locking the camshaft and crankshaft during engine rebuilds or cam chain replacements. Compatible with Range Rover TDV8 (2006-2011) and Range Rover Sport TDV8 (2006-2011).

Product code: MG91727

Engine timing tool set for BMW (N63/N74)

This engine timing tool set is expertly crafted for BMW vehicles equipped with N63 and N74 engines. It is an indispensable kit for any mechanic undertaking intricate engine work, such as replacing the timing chain, repairing the cylinder head, or replacing the cylinder head gasket.

Product code: MG91754

Engine timing tool set for Opel, Saab, Chevrolet (2.0 16V engine)

This engine timing tool set is specifically designed for use with the 2.0 16V SOHC engines found in certain Opel, Saab, and Chevrolet models. It is a crucial kit to ensure the correct positioning of the camshafts and crankshaft when changing the timing belt.

Product code: MG91772

Engine timing tool set for PSA, Toyota (1.0, 1.2 VTi Pure-Tech engines)

This tool set is meticulously crafted for timing belt replacement on PSA 1.0 and 1.2 VTi Pure-Tech three-cylinder belt drive petrol engines. It is essential to working on compatible Citroën, Peugeot, and Toyota models, ensuring precise timing adjustments.

Product code: MG91785

Engine timing tool set for VAG (1.8/1.8T,2.0 FSi/TFSi engines)

This tool set is specifically designed for the comprehensive servicing of VAG 1.8/1.8T and 2.0 FSi/TFSi twin camshaft engines. It's an essential toolkit to working on these specific VAG models, ensuring accurate belt tensioning and precise timing adjustments.

Product code: MG91887

Engine timing tool set for Audi (3.0 V6 30V engines)

This comprehensive tool set is specifically designed for Audi 3.0 V6 30V engines. It includes a range of tools for setting and locking the camshaft and crankshaft, along with additional instruments for adjusting the camshaft sprocket and belt tensioner. This kit is essential to working on Audi vehicles, ensuring precise timing adjustments and maintenance.

Product code: MG91888

Engine timing tool set for Porsche, Audi (4.5, 4.8 engines)

This engine timing tool set is specifically designed for adjusting the camshaft timings in Porsche and Audi vehicles equipped with 4.5 and 4.8 engines. The set is particularly suited for a range of Porsche models, including the Cayenne and Panamera.

Product code: MG91901

Engine timing tool set for Fiat, Alfa Romeo, Ford (1.2, 1.4 8V engines)

This engine timing tool set is expertly designed for use with 1.2 and 1.4 8V engines in select Fiat, Alfa Romeo, and Ford models. It includes a crankshaft locking tool, a camshaft setting plate, and a belt tensioner adjuster specifically for the 1.2 engine.

Product code: MG93396

Engine timing tool set for VAG (1.8, 2.0 TFSi, 2.0 Turbo engines)

This Engine Timing Tool Set is specifically designed for the VAG group's 1.8 and 2.0 4V TFSI/TSI turbocharged engines, as well as the 2.0L Turbo petrol engines. Suitable for a wide array of Audi, Seat, Skoda, and Volkswagen models, this comprehensive set ensures the correct timing alignment for optimal engine performance and longevity.

Product code: MG94103A

Engine timing tool set for VAG (1.2, 1.4 TSI/TFSI engines)

This tool set is a comprehensive kit designed for VAG 1.2 and 1.4 TSI/TFSI engines, including the advanced 1.4 TSi ACT. The kit facilitates precise work on camshafts, crankshafts, and timing belts, essential for engine maintenance and repair.

Product code: MG94104A

Engine timing tool set for VAG (1.2, 1.6, 2.0 TDi engines)

This Engine Timing Tool Set offers a comprehensive solution for working on VAG 1.2, 1.6, and 2.0 TDi engines. It is expertly designed to cater to both Pumpe Duse and common rail diesel engines, ensuring broad compatibility across various models. The kit is not only suitable for a range of VAG models but also extends its utility to vehicles from Ford, Dodge, and Mitsubishi.

Product code: MG94105

Engine timing tool set for VAG (1.6, 1.8, 1.8T, 2.0 engines)

This engine timing tool set is designed for a wide range of VAG and Ford diesel and petrol engines, including 1.6, 1.8, 1.8T, and 2.0 variants. It's an essential toolkit for the timing belt replacement, servicing the chain in head, and tensioner applications, particularly in 1.8/1.8T engines.

Product code: MG94106

Engine timing tool set for VAG (1.8, 2.0 TFSi, 2.0 Turbo engines)

This Engine Timing Tool Set is expertly crafted for VAG group vehicles equipped with the 1.8 and 2.0 4V TFSI/TSI and 2.0L Turbo petrol engines.

Product code: MG94111

Camshaft locking tools for Audi (V8 4.2 40V engine)

This Camshaft Locking Tool set is specifically tailored for the Audi V8 4.2 40V engine, characterized by its 40 valves (5 valves per cylinder) configuration.

Product code: MG9411201

Camshaft setting tools for Audi (V8 4.2 40V engine)

This set of Camshaft Setting Tools is specifically designed for Audi's 4.2L 40-valve V8 engines, commonly found in models such as the Audi B6 S4, Audi B7 S4, Audi A6, Audi A8, and the Volkswagen Phaeton. These tools are crucial for accurately fixing the position of the camshaft position sensor rotor ring during the installation of camshaft timing chains.

Product code: MG9411202

Camshaft locking tool for VAG (W8, W12 engines)

This Camshaft Locking Tool is expertly crafted for use with VAG engines, specifically the W8 and W12 configurations. The tool is specially designed to securely hold and precisely align the camshaft during critical maintenance and repair tasks.

Product code: MG9411401

Engine camshaft spacer set for Audi (2.0L 4V TFSI engine)

This Engine Camshaft Spacer Set is designed specifically for Audi's 1.8 and 2.0-liter TFSi Turbocharged 4-valve petrol engines. It is a vital tool kit in detailed engine work, particularly when removing and fitting camshafts.

Product code: MG94119

Camshaft pulley locking wrench for Subaru

Camshaft pulley locking wrench for Subaru. Removes the intake and exhaust cam sprockets on AVCS without damage.

Product code: W0680

Engine timing tool set for Ford (2.0TDCi EcoBlue engines)

This engine timing tool set is expertly designed for the latest generation of Ford EcoBlue 2.0TDCi belt-in-oil diesel engines.

Product code: MG94795

Timing lock for VW Polo, Skoda Fabia 1.2 6V and 12V

Gasoline VAG 1.2 engine camshaft retaining set, suitable for holding the camshaft of single camshaft 6-valve BMD and 12-valve AZQ, BME Skoda, Volkswagen, Seat cars in the service position.

Product code: W0682

Engine timing tool set for JLR 2.0/2.0D Ingenium engine

This Engine Timing Tool Set is specifically designed for the 2.0 Ingenium chain drive petrol and diesel engines from Jaguar Land Rover (JLR). It's an essential toolkit for anybody working on these modern engines. It ensures accurate timing and alignment during servicing or repair work.

Product code: MG95602C

Engine timing tool set for Fiat, Lancia (1.4 12V engine)

This engine timing tool set is designed specifically for use with Fiat and Lancia vehicles, ensuring precise alignment and timing for 1.4 12V engines.

Product code: MG95622

Engine timing tool set for Fiat, Lancia (0.9 engine)

This specialized engine timing tool set is designed for precision maintenance and repair tasks on select Fiat and Lancia models, featuring a 0.9-liter engine. This set provides the necessary tools for efficient timing chain removal and replacement, ensuring optimal engine performance.

Product code: MG95623

Engine timing tool set for BMW, Mini, PSA (W16D engines)

Ideal for timing belt replacement and chain-in-head service operations, this engine timing tool set ensures precise alignment and timing of W16D engines. It's compatible with a wide array of vehicles from Citroen, Peugeot, BMW, and Mini, making it a key asset for maintaining optimal engine performance.

Product code: MG95626

Balance shaft setting tool set for BMW (N40, N42, N43, N45, N46, N46T, N49, N52 engines)

This Balance Shaft Setting Tool Set is specially designed for BMW engines, offering precision and reliability for setting balance shafts.

Product code: MG95630

Engine timing tool set for Ford (1.4, 1.6 TDCi engines)

This tool Set is specifically designed for Ford's 1.4 and 1.6 TDCi engines. It's an essential toolkit to perform precise engine timing and maintenance. The set includes timing pins that lock and hold the camshaft, crankshaft, flywheel, and HP pump in the timed position, ensuring accurate alignment during essential maintenance tasks.

Product code: MG95635

Crankshaft pulley locking tool for VAG (1.4, 1.6 16V engines)

This crankshaft pulley holding tool is specifically designed for use with VAG 1.4 and 1.6 16V twin cam petrol engines, commonly found in various Seat and Volkswagen models.

Product code: MG96473

Universal camshaft sprocket locking tool set

This tool set is engineered for the precise locking of camshaft sprockets during the replacement or maintenance of toothed belts.

Product code: MG96482

Camshaft Gear Alignment Tool Renault 2.0; 2.3 DCI

The Camshaft Gear Alignment Tool for Renault 2.0 and 2.3 DCI engines - the ultimate solution for precision engine maintenance and repair! Designed with meticulous attention to detail, this high-quality tool is a must-have for professional mechanics and DIY enthusiasts alike. Crafted from robust materials, the Camshaft Gear Alignment Tool is built to withstand the rigors of regular use. You can trust its reliability and longevity.

Product code: W0685

Water pump pulley wrench for VAG engines, 1/2" square drive

This wrench is a specialized tool designed for locking water pump pulleys in a range of VAG engines. The wrench features a 1/2" square drive integrated into the handle, making it both versatile and convenient for various automotive tasks.

Product code: MG97003

Engine timing tool set for Opel (2.0 engine)

This engine timing tool set is specifically designed for Opel vehicles with 2.0 engines, ensuring that the camshafts are securely locked in their timed position during timing chain replacement. It's an essential toolkit for the accurate and safe replacement of the timing chain within the cylinder head.

Product code: MG97047

Engine timing tool set for Opel (2.0 CDTi engine)

This tool set is specifically designed for the 2.0 CDTi belt drive diesel engines found in various Vauxhall/Opel models. It is an essential toolkit when replacing the camshaft drive belt, ensuring the timing is set correctly and the engine runs efficiently.

Product code: MG97055

Engine timing tool set for VAG (1.2, 1.4, 1.6 FSi/Tsi engines)

This tool set is specifically assembled for use with VAG 1.2, 1.4, and 1.6 FSi/Tsi engines.

Product code: MG98060A

Engine timing tool set for Fiat, Alfa Romeo, Lancia (1.2, 1.4 engines)

This tool set is curated for the specific requirements of Fiat, Alfa Romeo, and Lancia vehicles equipped with 1.2 and 1.4 engines. It is an indispensable kit for everyone undertaking belt replacement and other timing-related tasks on these vehicles, encompassing both early and later variants of these engines.

Product code: MG98071

Engine timing tool set for Opel, Saab, Chevrolet

This Engine Timing Tool Set is specifically engineered for precision timing and belt replacement on a wide range of vehicles from Opel, Saab, and Chevrolet. It is ensuring the correct timing position is maintained during critical maintenance tasks.

Product code: MG98072P

Engine timing tool set for BMW, Mini, PSA (1.4, 1.6)

This tool set is expertly designed for the 1.4 and 1.6 16v Valvetronic direct injection, chain drive petrol engines found in a range of BMW, Mini, Peugeot, and Citroën vehicles. The kit includes essential tools for setting and locking the engine timing, crucial for precise engine maintenance and repair.

Product code: MG98302

Engine timing tool set for BMW, Mini, PSA (1.4, 1.6, 1.8, 2.0, 2.5, 3.0 engines)

This Engine Timing Tool Set is meticulously designed for the removal and installation of the timing chain assembly in a wide range of BMW, Mini, and PSA engines. It is an essential collection of tools for everyone engaged in comprehensive engine work on these specific models.

Product code: MG98304

Camshaft setting tools for VAG (5 and 10 cylinder engines)

This tool kit is designed for VAG vehicles equipped with 5 and 10 cylinder engines. It is essential for adjusting the camshaft during engine checks and repairs.

Product code: MG9851005.06

Engine timing tool set for VAG (1.6, 2.0 TDi engines)

This comprehensive tool set is specifically designed for the popular 1.6 and 2.0 VAG TDi CR diesel engines found across various VAG ranges from 2012 onwards. It's an essential toolkit for the removal and fitting of the camshaft drive belt, ensuring the engine's timing is accurately maintained.

Product code: MG98511A

Engine timing tool set for BMW (N43)

This tool set is meticulously tailored for BMW vehicles equipped with the N43 engine. It is a comprehensive kit designed for checking, adjusting, and setting camshaft timing, as well as removing and replacing the cam chain.

Product code: MG98515

Engine timing tool set for VAG (2.4, 3.2 FSI, V6, V8, V10 engines)

This tool set is meticulously designed for use with various VAG engines, including the 2.4 and 3.2 FSI, as well as Audi's V6, V8, and V10 engines. It is an indispensable tool kit in checking and adjusting the engine timing for these specific engine types.

Product code: MG98516

Universal timing gear holder

This innovative tool is crafted to offer superior strength and reliability during engine maintenance, particularly in the adjustment and holding of timing gears.

Product code: MG98535A

Engine timing tool set for Renault, Nissan, Opel (2.0, 2.3 engines)

This Engine Timing Tool Set is meticulously designed for Renault, Nissan, and Opel vehicles equipped with 2.0 and 2.3 engines. Its primary function is to securely hold engine shafts (camshaft and crankshaft) in place, preventing them from turning during critical maintenance tasks like changing a timing belt or conducting other engine repairs.

Product code: MG98536

Timing tool for VW, Audi, Seat, Skoda 1.0, 1.2, 1.4 TSI Petrol engines

It's specially crafted for the alignment and correct timing of the engines, ensuring efficient and safe engine repairs or maintenance tasks. This tool is made of durable materials to withstand regular professional use.

Product code: W0739

Engine timing locking tool set for BMW (N20/N26)

This engine timing locking tool set is specifically designed for the newer BMW N20 and N26 4-cylinder turbo engines. The set includes specialized tools for fixing the camshaft and the VANOS encoder wheel in the top dead center position, crucial for precise engine timing and maintenance.

Product code: MG91302

Universal camshaft locking tool

This universal camshaft locking tool is designed for effectively locking twin camshafts to timing marks during timing belt replacement. Its versatile design allows it to fit onto various sprockets, extending to lock into sprocket teeth. This tool is essential for ensuring the accurate alignment and timing of camshafts and diesel injection pump sprockets.

Product code: MG50081

Timing lock set for BMW 2.0, 3.0D N47, N47S, N57 diesel (2007 - 2012)

Timing lock set for BMW 2.0, 3.0D N47, N47S, N57 diesel (2007 - 2012).

Product code: W0491

Timing lock for Renault, Peugeot, Citroen 3.0 V6 24V petrol engines

Timing lock for Renault, Peugeot, Citroen 3.0 V6 24V petrol engines.

Product code: W0436

Crankshaft rotation tool Volkswagen 2.5 TDI, Touareg, Transporter T5

Crankshaft rotation tool Volkswagen 2.5 TDI, Touareg, Transporter T5

Product code: W0452

Camshaft lock for Opel, Chevrolet, Saab 2.8, 3.0, 3.2, 3.6 engines

Camshaft lock for Opel, Chevrolet, Saab 2.8, 3.0, 3.2, 3.6 petrol V6 engines with timing chain.

Product code: W0454

Injection pump puller for Chrysler Voyager 2.5 TD

Injection pump puller for Chrysler Voyager 2.5 TD

Product code: W0455

Injection pump belt pulley tool for Jeep Grand Cherokee 3.1 TD

Injection pump belt pulley tool for Jeep Grand Cherokee 3.1 TD.

Product code: W0456

Oil pump locking plate Ford, Citroen Fiat 2.0, 2.2, 2.4, 3.2 TDCI, TDDI, Duratorq

An oil pump locking plate is a specialized tool used for locking the oil pump sprocket in place during the removal or installation of the timing belt or chain on Ford, Citroen, and Fiat engines. Prevents the sprocket from rotating.

Product code: W0588

Timing tool set for BMW, Mini, PSA (N13, N18 engines)

Suitable for BMW, Mini Cooper N13 and N18 engines for locking camshaft. The set contains tools for locking the camshaft and the crankshaft.

Product code: MG04A2233

Timing tool set for Renault, Dacia

This Timing Tool Set is specifically designed for Renault and Dacia models equipped with double camshaft 1.4, 1.6, 1.8, and 2.0 16V engines.

Product code: MG50094

Timing tool set for VW, Audi, Skoda, Seat

It helps to avoid damages of valves and pistons. Suitable for models with 1.0L 3 cylinder engines and 1.2L/1.4L engines.

Product code: MG04A3059

Timing tool set for BMW, Land Rover

This timing lock set is designed for BMW and Land Rover vehicles, featuring components essential for locking the camshaft and crankshaft, tensioning the timing belt, removing the injector pump, and adjusting the chain tension. It's suitable for a wide range of engine types, including 4 and 6 cylinder 2.0D 16V, 1.8, 2.0, 2.5, 3.0D, 5.2 TD, and TDS engines.

Product code: MG50374

Timing tool set for Ford

For 1.25, 1.4, 1.6, 2.0, 2.3, 1.6 v16, 2.0 RS, 1.6 Ti-VRC, 1.8 SCi, 2.0 ST 150, 2.0 XHR petrol, 1.8 TDdi, 1.8 TD, 1.8, 2.2, 2.2 TDCI engines

Product code: MG50375

Timing tool set for Renault, Opel, Nissan

This kit is specially designed for Renault, Opel, Nissan Timing Lock Tool Kit specifically designed to service 1.5, 1.9, 2.2 and 2.5 DCI and DTI engines. This comprehensive kit includes all the tools you need to precisely time and adjust your motors, ensuring proper alignment and synchronization during repair or maintenance tasks.

Product code: MG50306

Ribbed belt remover and installer tool set, universal

Effortlessly remove and install ribbed belts with our universal tool set. Includes two tools - one for installation and one for removal. Compatible with Alfa Romeo, Audi, BMW, Chrysler, Fiat, Ford, Mercedes, Seat, Skoda, Smart, PSA, Volvo, VW. Save time and money.

Product code: MG50370

Camshaft sprocket locking tool for VAG (1.0 engines)

This Camshaft Sprocket Locking Tool is specifically designed for use with VAG 1.0 engines, providing an essential solution for mechanics and enthusiasts working on Volkswagen Up, Skoda Citigo, and Seat Mii models.

Product code: MG9410403

Camshaft sprocket locking tool for VAG (1.8, 2.0 TFSI engines)

This tool is specially designed for use with VAG 1.8 and 2.0 TFSI engines. It is facilitating the secure locking of both intake and exhaust camshafts. Particularly useful when loosening the central bolts of the camshaft sprockets.

Product code: MG95625

Variator key for VAG 1.4, 1.6 TSI and TFSI engines

Variator key for VW, Audi, Seat, Skoda 1.4, 1.6 TSI and TFSI engines.

Product code: W0603

Locking pin for Renault and Nissan 1.6 DCI R9M timing locks

Locking pin for Renault Megane, Scenic, Grand Scenic, Nissan Qashqai , Qashqai 2, 1.6 DCI R9M engine timing tool.

Product code: W0553

Mercedes timing lock M271 : E18ML DE18ML E16ML

The "Mercedes timing lock M271" is a specialized tool used for locking the timing components in place during maintenance or repair procedures on Mercedes-Benz engines with the M271 designation. The M271 engine is a series of inline-four-cylinder gasoline engines used in various Mercedes-Benz models.

Product code: W0555

Engine timing tool set for BMW (N51/N52/N53/N54/N55)

This tool set is specifically designed for a wide range of BMW 2.5 and 3.0 chain drive, six-cylinder, twin camshaft petrol engines. It is tailored for use with N51/N52/N52K Valvetronic engines and N53/N54/N55 direct injection engines.

Product code: MG98519

Balance shaft locking tool for BMW (B38, B47, B48, N47 engines)

This tool is designed to securely lock the balance shafts in the correct timed position, ensuring precision and efficiency in engine maintenance tasks.

Product code: MG96453

Timing lock for Renault, Nissan 1.6 DCI

Timing lock for Renault, Nissan 1.6 DCI.

Product code: W0464

Engine timing tool set for Land Rover, Jaguar, Citroen, Peugeot (2.7, 3.0 TDV6 engine)

Engine timing tool set for Land Rover, Jaguar, Citroen, and Peugeot 2.7, 3.0 TDV6 engines. Includes camshaft locking and checking pins, flywheel locking tools, coolant pump pin, and belt retaining clip.

Product code: MG99563

Engine timing tool set for Audi, VW (2.0, 2.8, 3.0 TFSI engines)

Specialized engine timing tool set for Audi and VW 2.0, 2.8, 3.0 TFSI engines. Essential for aligning camshafts when adjusting timing in models including Audi A6, Q5 2.0T, A6L 3.0T.

Product code: MG98516A

Balance shaft lock tool for BMW (N40/N42/N45/N46)

Tool for aligning balance shafts to TDC during assembly and disassembly of BMW N40, N42, N45, and N46 engines.

Product code: MG9830402

Engine timing tool set for VAG (1.4, 1.4T, 1.6 engines)

Engine timing tool set for VAG 1.4, 1.4T, 1.6 engines. Ensures correct camshaft and crankshaft timing position during timing belt changes. Suitable for various VW, Skoda, and Audi models.

Product code: MG94109

Engine timing tool set for Fiat, Alfa Romeo (1.4T engine)

Engine timing tool set for Fiat and Alfa Romeo 1.4T engines. Designed to lock the cam and crankshaft for timing belt removal and replacement. Suitable for Alfa Romeo Mito, Giulietta Multiair, and Fiat Punto, Evo, Bravo (2009-2013).

Product code: MG93394A

Fuel pump camshaft aligner for Land Rover, Jaguar (V8 5.0 engine)

Fuel pump camshaft aligner for Land Rover and Jaguar V8 5.0 engines. Specifically designed to align the fuel pump camshaft for Jaguar and Range Rover models from 2012 onwards.

Product code: MG91719

Engine timing tool set for Fiat, PSA, Iveco (2.2, 2.3, 3.0 JTD engines)

Engine timing tool set for Fiat, PSA, and Iveco 2.2, 2.3, 3.0 JTD engines. Includes essential tools for water sensor installation, crankshaft turning, timing cover centring, oil pump setting, and camshaft and crankshaft locking. Suitable for Fiat Ducato, Iveco Daily, Citroen Relay, and Peugeot Boxer.

Product code: MG91699

Engine timing tool set for Ford, Mazda, Volvo (1.6, 2.0 T4/T5 engines)

Engine timing tool set for Ford, Mazda, and Volvo 1.6 and 2.0 T4/T5 engines. Designed for 1.6 direct injection petrol engines with variable valve timing (VVT). Compatible with a wide range of Ford, Volvo, and Mazda models.

Product code: MG91683

Timing tool set Fiat Ducato 2.2 JTD

Timing lock tool for Fiat Ducato 2.2 JTD engines. Includes a bent adapter used specifically to lock the flywheel in place during timing belt maintenance.

Product code: W0204

Timing tool set, Mini Cooper (06-10) 1.6 Diesel

This timing lock tool is specifically designed for Mini 1.6 Diesel engines.

Product code: W0209

Timing belt tensioner key, Chrysler Voyager, Jeep Cherokee 2.5, 2.8 CRD

Timing belt tensioner key, Chrysler Voyager, Jeep Cherokee 2.5, 2.8 CRD diesel engines

Product code: W0219

Timing belt tensioner key for HDI engines

Timing belt tensioner key for HDI engines, designed to assist in the precise tensioning of timing belts in vehicles equipped with HDI engines.

Product code: W0222

Timing tool set BMW N62, N73 engines

Timing tool set BMW N62 engines; N62TU; N73 / PETROL V8 3.6/4.0/4.4/4.8 N62/N62TU + 6.0 V12 N73 timing chain

Product code: W0252

Timing tool set Mini One, Cooper 1.6, Cooper 1.6s, petrol, chain

Timing tool set for Mini One, Cooper 1.6, and Cooper 1.6s petrol engines with chain. Ideal for precise engine timing adjustments.

Product code: W0264

Timing tool set Lancia Kappa 5 cyl. 2.0 20v (Silver)

Timing tool set for Lancia Kappa 5-cylinder 2.0 20V engines. Silver edition for precise engine timing.

Product code: W0271

Key crankshaft Citroen / Peugeot, petrol 1.8/2.0/2.2 16V HPI "EW" belt

Crankshaft wrench for Citroen/Peugeot 1.8, 2.0, 2.2 16V petrol engines with timing belt.

Product code: W0273

Timing lock Fiat Brava/Bravo/Marea 2.0 20V - petrol (pink)

Timing lock for Fiat Bravo, Brava, Marea, and Coupe 2.0 20V petrol engines (1995-2001). Pink edition.

Product code: W0277

Timing tool set Volkswagen Touareg, Phaeton 5.0 V10 TDI

Timing tool set Volkswagen Touareg, Phaeton 5.0 V10 TDI

Product code: W0276

Oil pump setting tool for Ducato, Iveco, Citroen Jumper - 2.3 Diesel Common Rail

Oil pump setting tool for 2.3 Diesel Common Rail engines in Fiat Ducato, Iveco, Citroen Jumper, and Peugeot Boxer. Diameter: 80mm (outer), 50mm (inner). Suitable for models after 2006.

Product code: W0278

Cam lock Fiat Bravo / Brava / Marea, Lancia Delta / Debra 1 set. - Petrol 1.8 16V 115 KM (dark green)

Cam lock tool set for Fiat Bravo, Brava, Marea, and Lancia Delta, Dedra with 1.8 16V 115 HP petrol engines. Dark green edition for precise timing alignment.

Product code: W0299

Upper knuckle pin press for Cherokee, Grand Cherokee, Wrangler

Upper knuckle pin press for Cherokee, Grand Cherokee, and Wrangler models. Designed for precise removal and installation of top pins.

Product code: W0313

Tool for setting TDC (Top Dead Center) for Volkswagen 2.5 TDI

A specialized tool for accurately setting the Top Dead Center (TDC) position on Volkswagen 2.5 TDI engines. Suitable for Touareg 2003 and Transporter 2004 models with 5-cylinder diesel engines.

Product code: W0374

Key for assembly, disassembly and locking of the pulley wheel for BMW M52 / M54 / M56

Key for assembly, disassembly, and locking of pulley wheels for BMW M52/M54/M56 engines. Fits various models and pulley diameters (32mm inner, 194mm & 129mm outer).

Product code: W0458

Injection pump lock Rover, Land Rover, Jaguar 3.0

Injection pump lock for Jaguar, Land Rover, and Rover 3.0 TDV6 engines. Fits Jaguar XF, XJ, Land Rover Discovery 4, Range Rover, and Range Rover Sport models (2009-2014).

Product code: W0465

Crankshaft Lock BMW 1.6/2.0/3.0 - N47 / N57

Crankshaft Lock tool for BMW 1.6, 2.0, and 3.0 engines (N47/N57). Ensures secure crankshaft locking during maintenance or timing adjustments.

Product code: W0489

Flywheel locking tool set for Jaguar, Land Rover

This Flywheel Locking Tool Set is specifically designed for use on various models of Jaguar and Land Rover vehicles. Enabling the secure locking of the flywheel when performing tasks such as removing or replacing the front pulley bolt.

Product code: MG97059

Engine timing tool set for Opel, Saab, Chevrolet (2.0, 2.4 turbo engines)

This comprehensive engine timing tool set is designed specifically for the timing chain removal and replacement on 2.0L and 2.4L turbocharged twin-cam petrol engines, commonly found in various models of Vauxhall, Opel, Saab, and Chevrolet. It's tailored to work with A20NHT & A24XF engines.

Product code: MG91717

Engine timing tool set for Fiat, PSA, Iveco (2.3 JTD engine)

This engine timing tool set is expertly crafted for use on vehicles with the 2.3 JTD engine, found in certain models of Fiat, Citroen, Iveco, and Peugeot. The set includes essential tools for setting and locking the camshaft, crankshaft, and sensor, which are vital for accurate engine timing, particularly during maintenance and repair work.

Product code: MG91699A

Diesel Engine Timing Tool Kit Ford, Jaguar, Land Rover, Volvo

This Diesel Engine Timing Tool Kit is an essential tools designed for precision timing and timing belt replacement on a variety of diesel engines in Ford, Jaguar, Land Rover, and Volvo vehicles. It's a comprehensive kit that includes flywheel locking tools and camshaft pins, ensuring accurate engine timing for maintenance and repair tasks.

Product code: MG91696B

Engine timing tool set for Ford (1.6 TI-VCT engines)

This comprehensive engine timing tool set is specifically designed for Ford 1.6 Duratec engines with variable valve timing, including the 1.6 SCTi/Ti-VCT Ecoboost and 1.6gtdi models, as well as the newer 1.5L Ecoboost engines from 2014 onwards.

Product code: MG91684

Timing tool set for VW 1.5 TSi petrol engines

The C01/0275 timing tool set is a professional tool specifically designed for VW Audi Seat Cupra Skoda 1.5 TSI engines. The set includes a battery-powered digital inclinometer and precision adapters that ensure the camshafts are precisely set according to the manufacturer's specifications. The use of this tool set does not require interaction with the vehicle's OBD system.

Product code: C01/0275

Engine timing tool kit for VW, Audi TSI, TFSI 1.8/2.0

A set used for the correct blocking and setting of the timing in 4-cylinder EA888 1.8 R4 16v TSI/TFSI, 2.0 R4 16v TSI/TFSI 2006-2013 VAG petrol engines in the TSI, TFSI EA888 engine series (1.8/2.0).

Product code: CKB10188

Timing tool set for VAG

For 1.6, 2.0 TDi CR, fifth generation Common Rail diesel (Blue Motion) engines.

Product code: MG50618

Timing tool set for Opel, Suzuki

For 1.3 CDTI, DDIS diesel engines with timing chain

Product code: MG50310

Flywheel lock for Kia, Hyundai

Flywheel lock for Kia, Hyundai. Engine codes: 1.0 G3LA, GELC 1.2, G4LA 1.4, G4LC, G4FA 1.6, G4FC, G4FD, G4FJ 2.0, G4KD, G4KF, G4NC, G4NA, G4ND, G4NE 2.4, G4KE, G4KJ 2.7, G6BA.

Product code: W0557

Motorcycle flywheel puller set, 10pcs

Motorcycle flywheel puller set to separate and remove the flywheel and to perform certain repair or maintenance tasks.

Product code: MG04A7005

Engine timing tool kit for Ford 2.2, 3.2 TDCi

Engine timing tool kit for Ford Ranger, Transit, Everest, Mazda BT 2.2, 3.2 TDCi.

Product code: MG04A2432D

Engine timing tool kit for Vauxhall and Opel 1.6 CDTi diesel engines

Engine timing tool kit for Vauxhall and Opel 1.6 (from 2013 to 2018) CDTi EcoFlex engines. Engine codes: B16DTC, B16DTE, B16DTH, B16DTJ, B16DTL, B16DTN, B16DTR, B16DTU.

Product code: MG04A2370

High pressure pump sprocket remover for Hyundai and KIA

High pressure pump sprocket remover and flywheel lock for Hyundai and KIA. For chain driven 1.1, 1.4, 1.5, 1.6, 1.7 CRD diesel engines.

Product code: MG04A2331

Cambelt tension wrench set, 14pcs

Cambelt tension wrench set with 13 interchangeable adapters, suitable for almost all types of vehicles.

Product code: MG04A2305

Universal timing belt tensioner and remover

The Stretch Belt Mate Kit help install or remove stretch belts. Stretch belts can be difficult to install or remove without the proper tools. Improper installation or removal of a stretch belt can cause damage to the belt or other engine components.

Product code: MG04A2304

Timing tool set suitable for VAG 1.6 - 2.0 TDI CR engines (2012-)

This Timing Tool Set is compatible with a diverse lineup of VW Group vehicles, ensuring it covers a broad spectrum of popular models.

Product code: MG04A2184

Diesel Camshaft Head Rebuild Kit for VAG, Porsche, Audi, Skoda

This kit is allows you to overhaul the camshaft and cylinder head on VAG, Porsche or Audi common rail diesel engines. It holds the camshaft in the correct position when installing it. Equivalent to the OEM tooling required to allow the camshafts to be correctly fitted into the cylinder head. This is necessary as the cylinder heads on these engines are designed with a camshaft retaining frame that splits from the cylinder head along the centre line of the cam bearing caps.

Product code: MG04A1030

Timing lock for Citroen, Peugeot, Opel 1.2 Vti (VVT), GDI

This tool kit makes it easy to change the timing belt without having to disassemble multiple components. Allows you to determine if the belt needs to be replaced without having to disassemble the engine.

Product code: C01/0230A

Timing adapter set VW Group 1.2 TSI petrol engine

A timing adapter set for setting and checking camshaft timing on 1.0L, 1.2L, and 1.4L TSI petrol engines in VW Group vehicles, compatible with C01/0275 kit.

Product code: C01/0279

Engine timing tool set for Volvo, Land Rover (3.2 T6, 3.2 T6 engines)

The engine timing tool set for Volvo and Land Rover 3.2 T6 engines is essential for correctly aligning the engine camshaft and crankshaft positions, particularly for maintenance or repair tasks involving timing components. This tool ensures precision alignment, which is crucial for engine performance and longevity.

Product code: MG90305

Engine timing tool set for Ford (2.0 SCTI Ecoboost/Ti-VCT engines)

The engine timing tool set for Ford 2.0 SCTI Ecoboost/Ti-VCT engines is specifically developed for chain-driven, direct injection petrol engines equipped with variable valve timing (VVT). This tool ensures the correct alignment of the camshaft and crankshaft, especially during maintenance or repair tasks involving timing components.

Product code: MG91682

Engine timing tool set for BMW, Mini (N47/N57)

The Engine Timing Tool Set is specifically designed for BMW and Mini vehicles equipped with N47 and N57 diesel chain drive engines.

Product code: MG91753B

Engine Camshaft Timing Tool Kit For BMW N63/S63/N74 V8 X6550i 750i

This tool ensures precision alignment and positioning of the camshaft, facilitating seamless and efficient engine work.

Product code: MG91754A

Engine timing tool set for Ford (1.0 EcoBoost engines)

Engine timing tool set for Ford 1.0 EcoBoost engines. Essential for setting and locking the engine and adjusting variable cam timing units. Suitable for Ford B-MAX, C-MAX, EcoSport, Fiesta, Focus, Grand C-MAX.

Product code: MG91784

Diesel engine camshaft setting plate for VAG (1.9SDi/TDi engines)

This specialized tool is specifically designed for setting the camshaft timing on VAG 1.9SDi and TDi diesel engines. Its design facilitates accurate camshaft alignment without the necessity of removing the cam cover, streamlining the timing process and making it more efficient.

Product code: MG94107

Engine timing tool set for VAG (EA888 engine)

The VAG EA888 engine timing tool set ensures precise camshaft and crankshaft alignment for Mk5, Mk6, B6 CC, A3, A4, A5, A6, Q5, TT 2.0 T engines. Made from high-quality steel, it guarantees durability and performance.

Product code: MG94111B

Crankshaft pulley set for Jaguar, Land Rover (3.0L V6, 5.0L V8 engines)

Designed for use with Jaguar and Land Rover vehicles equipped with 3.0L V6 and 5.0L V8 petrol engines. Facilitates the removal of the front crankshaft pulley (crankshaft vibration damper).

Product code: MG95604

Engine timing tool set for Chrysler, Jeep, Dodge (2.8 CRD engine)

The engine timing tool set for Chrysler, Jeep, and Dodge 2.8 CRD engines is used to lock the camshafts and crankshaft in position when setting the engine timing.

Product code: MG96443

Engine timing tool set for Chrysler, Jeep, Dodge (2.8 CRD engine)

The engine timing tool set for Chrysler, Jeep, and Dodge 2.8 CRD engines is designed for 2008 and later 2.8 CRD engines where the cambelt drives one camshaft and the second camshaft is driven via gears.

Product code: MG96443A

Engine timing tool set for Mercedes-Benz (M651)

Comprehensive engine timing tool set designed for Mercedes-Benz 1.8/2.1 CDI Diesel Engines (M651). Suitable for A, B, C, E, G, M, S, V class models and Sprinter, Viano, Vito vans.

Product code: MG96494

Engine timing tool set for Opel (1.6 SIDI Turbo EcoFLEX engine)

The engine timing tool set for Opel 1.6 SIDI Turbo EcoFLEX engines provides the essential tools required for camshaft drive chain replacement and setting the engine timing.

Product code: MG96496

Crankshaft pulley locking tool for VAG (1.8, 2.0 TFSi/Tsi engines)

This crankshaft pulley locking tool is specifically designed for use on 1.8 and 2.0-liter TFSi/TSi petrol engines within the Volkswagen Audi Group (VAG) range. It's an essential tool for mechanics and technicians working on these engines, particularly during tasks that involve loosening or tightening the pulley fixing bolt.

Product code: MG97001

Oil pump and balance shaft tool set for BMW (N20/N26)

This specialized tool set is designed for BMW vehicles equipped with N20 and N26 2.0L engines. It is an essential kit for professionals working on these specific BMW engine types, particularly useful for tasks involving the balancer shaft and chain sprocket.

Product code: MG97061

Engine timing tool set for VAG (2.7, 3.0 V6 TDI engines)

This engine timing tool set is expertly crafted for servicing Volkswagen and Audi vehicles equipped with the 2.7 and 3.0 V6 common rail, chain-driven diesel engines. The set includes specialized adaptors and alignment tools, ensuring precise timing and alignment during maintenance.

Product code: MG98513

Timing tool for VW 2.5 / 4.9 D / TDI PD - 5-cyl and 10-cyl

This Cam Lock Tool Set, specifically designed for VW 2.5 / 4.9 D / TDI PD engines, including 5-cylinder and 10-cylinder configurations.

Product code: W0340

Timing lock Opel Corsa D 1.0

This timing lock tool, specifically designed for Opel Corsa D vehicles with 1.0 engines. This tool is essential for securing the engine components during timing belt or chain replacement, ensuring accurate alignment and preventing potential damage.

Product code: W0402

Crankshaft Locking Wrench Ford Mondeo, Transit 2.0 2.2 2.4 3.2 Duratorq TDCi (01-)

The Crankshaft Locking Wrench for Ford Mondeo and Transit 2.0, 2.2, 2.4, and 3.2 Duratorq Di, TDDi, and TDCi diesel engines (2001 onwards) as well as the 2.3 Duratec Petrol engine is a specialized tool designed to hold the crankshaft in a fixed position during maintenance or repair work.

Product code: W0407

Camshaft locking tool BMW gasoline 1.8 / 2.0 N42 / N46 / N46T Valvetronic

The camshaft locking tool for BMW gasoline engines (1.8 / 2.0 N42 / N46 / N46T Valvetronic) is an essential timing lock kit designed for specific BMW models.

Product code: W0414

Pulley lock wrench Renault, Peugeot, Citroen 3.0 V6

This tool ensures the proper locking of the pulley and prevents it from moving during maintenance or repair.

Product code: W0435

Timing lock BMW N53 Vanos ,BMW N54 Vanos

Ensure accurate and efficient engine maintenance with the Timing Lock tool, specifically designed for BMW N53 and N54 engines equipped with VANOS. This tool is essential for securing engine components during timing adjustments, ensuring precise alignment and preventing potential damage.

Product code: W0475

Timing Lock Set for Mercedes 2.0, 2.1, 2.2 CDI

Ensure precise and efficient engine maintenance with the Timing Lock Set, specifically designed for Mercedes-Benz 2.0, 2.1, and 2.2 CDI engines. This tool is essential for securing engine components during timing adjustments, ensuring accurate alignment and preventing potential damage.

Product code: W0477

Lock timing Opel 1.6 SIDI Pertol

Lock timing tool for Opel 1.6 SIDI Turbo engines, compatible with Astra J, Cascada, Insignia, and Zafira C Tourer models (2013-2016). Supports engine codes A16XHT, A16SHT, B16SHT, B16SHL.

Product code: W0533

Injector puller Chrysler Voyager 2.5 ; 2.8 CRD

Injector puller for Chrysler Voyager 2.5 and 2.8 CRD engines, compatible with VM 2.5 CRD and 2.8 CRD engines from 2001. Suitable for Chrysler Voyager, Grand Voyager, and Jeep Cherokee.

Product code: W0538

Camshaft Lock BMW M62 Vanos

Camshaft lock tool for BMW M62 VANOS engines (1999-2002). OEM Number: 116452, 116451.

Product code: W0543

Timing lock tool for VW, Audi, Seat, Skoda - 2.0 FSI / TFSI – petrol

Timing lock tool for 2.0 FSI/TFSI petrol engines in VW, Audi, Seat, and Skoda models. Compatible with various models and engine codes from 2004 onwards.

Product code: W0554

Adapter for locking and turning the camshaft 1.8 / 2.0 TFSI

Adapter for locking and turning the camshaft in 1.8/2.0 TFSI engines, compatible with Audi, Seat, Skoda, and VW 3rd generation engines.

Product code: W0561

Shaft Pulley Lock Wrench Ford / Volvo 1.8 , 2.0 , 2.4 16v Duratec

Shaft pulley lock wrench for Ford and Volvo 1.8, 2.0, and 2.4 16V Duratec engines. Ensures secure and precise pulley locking during maintenance.

Product code: W0566

Timing lock Jaguar 2.0 GTDi, Land Rover 2.0 Si4

Timing lock tool kit for Jaguar 2.0 GTDi and Land Rover 2.0 Si4 engines. Includes camshaft lock, shaft pulley lock, flywheel lock, shaft sensor lock, and shaft lock. Compatible with specific Jaguar and Land Rover models.

Product code: W0578

High pressure pump sprocket lock for VW, Audi 3.6 V6 engines

High pressure pump sprocket locking tool for VW, Audi 3.6 V6 4V engines (OEM T10332)

Product code: W0580

Flywheel and shaft pulley lock Renault Nisan 1.4, 1.6 , 2.0, 2.3

Flywheel and shaft pulley lock tool for Renault and Nissan vehicles with 1.4, 1.6, 2.0, 2.3, 2.5, and 3.5 engines. Designed for precise and secure engine timing during maintenance.

Product code: W0584

Lock timing Mercedes M112 / M113

Timing lock tool for Mercedes M112/M113 petrol engines, compatible with a range of Mercedes and Chrysler vehicles. Ensures accurate timing during engine maintenance.

Product code: W0591

Timing belt tensioner wrench VW , Audi , Skoda 1.4 TSI / TFSI 16mm

Timing belt tensioner wrench for VW, Audi, and Skoda 1.4 TSI/TFSI engines, 16mm. Ensures proper tension adjustment for specific Volkswagen, Audi, and Skoda models.

Product code: W0597

Mercedes M112 Shaft Pulley Locking Wrenches. M113, M271, M272, M273, M642

Shaft pulley locking wrenches for Mercedes engines M112, M113, M271, M272, M273, and M642. Compatible with Mercedes, Chrysler, and Jeep vehicles.

Product code: W0604

Crankshaft lock BMW, Mini B37 B38 B47 B48 B58

Crankshaft lock tool for BMW and Mini engines B37, B38, B47, B48, and B58. Essential for precise engine timing during maintenance.

Product code: W0607

Crankshaft turning wrench Audi 2.5 RS TFSI

Crankshaft turning wrench for Audi 2.5 RS TFSI engines, designed for precise crankshaft rotation during maintenance. Compatible with Audi V5 2.5 RS TFSI and Audi TT (2007 and newer).

Product code: W0613

Wheel lock for high pressure pump Volkswagen , Audi 3.6 L

Wheel lock tool for high-pressure pump on Volkswagen and Audi 3.6L engines. Designed for use with VW Passat, Touareg, and Audi Q7 models equipped with BHK and BLV engines.

Product code: W0617

BMW N20/N26 Balancer Shaft Lock + Oil Pump Gasket Repair Kit

Balancer shaft lock and oil pump gasket repair kit for BMW N20/N26 engines. Compatible with BMW 1, 2, 3, 4 Series, X1, X3, X4, and Z4 models (2011-2017) with 1.6L/2.0L petrol engines.

Product code: W0618

Camshaft lock for Opel 1.4 without Turbo

Camshaft lock for Opel 1.4L naturally aspirated engines (LV7/B14XE) in Opel Astra K. Ensures precise camshaft positioning during maintenance.

Product code: W0654

Camshaft wrench , BMW / Mini Actuator B38 B46 B48

Camshaft wrench for BMW and Mini Actuator engines B38, B46, B48. Compatible with BMW 1, 2, 3, 4 Series, i8, and Mini models. OEM: 2360895.

Product code: W0660

VW variator wrench , Audi 3.0

VW/Audi variator wrench for 3.0L 6-cylinder 4V compressor engines, designed for tensioning the timing chain and camshaft adjuster. Compatible with Audi A6, A7, A8, and Q5 models with direct injection.

Product code: W0674

Mercedes Benz M272 / M273 pulley unscrewing wrench

Pulley unscrewing wrench for Mercedes Benz M272 and M273 engines, designed for easy and precise removal of pulleys on V6 and V8 engines in various Mercedes models from 2004 to 2014.

Product code: W0677

Air conditioning pulley lock wrench Ford C-max , Focus , Kuga

Air conditioning pulley lock wrench for Ford C-Max, Focus, Kuga, and other Ford models. Ensures secure locking of the AC pulley during maintenance. Compatible with models from 2010 and newer.

Product code: W0719

Flywheel locking tool for BMW N20/N26

Flywheel locking tool for BMW N20/N26 engines. Essential for securely locking the flywheel during timing and engine repair tasks.

Product code: MG97063

Camshaft alignment tool set for BMW S63 engine

Specially designed for positioning the camshaft in the TDC (Top Dead Center) position, this tool set allows for precise timing chain tensioner adjustment on BMW S63 engines.

Product code: MG91059

Timing tool set for BMW N42/N46 1.6/1.8/2.0 chain drive engines

Timing tool set for BMW N42/N46 1.6/1.8/2.0 chain drive engines, designed for precise engine timing adjustments.

Product code: MG91617

Engine timing locking tool set for PSA, Toyota 1.0, 1.2 VTi

Engine timing locking tool set for PSA and Toyota 1.0, 1.2 VTi engines. Ideal for timing belt replacement in Citroen, Peugeot, and Toyota Aygo models with 3-cylinder petrol engines.

Product code: MG91785A

Engine timing tool set for Volvo 2.0 diesel

Engine timing tool set for Volvo 2.0 diesel engines. Locks crankshaft and HP fuel pump for accurate timing. Compatible with various models from 2013 onwards.

Product code: MG90307

Crankshaft pulley lock for Renault, Dacia, Smart 0.9/1.2 engines

A crankshaft pulley lock designed for securing the pulley during loosening and tightening of the pulley bolt in 0.9L and 1.2L petrol engines of Renault, Dacia, and Smart vehicles.

Product code: W0744

Ford engine timing kit for 1.5L 3-cylinder EcoBoost

A specialized engine timing kit designed for setting and locking the timing on Ford 1.5L 3-cylinder EcoBoost engines, ensuring accurate and efficient timing belt or chain replacements.

Product code: MG97100

Crankshaft position sensor installation tool for Land Rover, Jaguar (TDV6 engine)

A specialized tool for installing the crankshaft trigger wheel in Land Rover and Jaguar vehicles with TDV6 engines, ensuring precise alignment.

Product code: MG91907

Engine Timing Tool Set for Ford 2.5, Volvo 1.6 - 2.5 & 2.4D

A specialized timing tool set designed to hold the crankshaft in place when working on the center pulley nut, ideal for Ford and Volvo models with 1.6-2.5L and 2.4D engines.

Product code: MG96483

Timing tool set for Ford

For 2.0, 2.2, 2.4 TDDI, TDCI, engines with timing chain

Product code: MG50325

Engine timing tool for Renault, Nissan, Opel (2.0, 2.3 DCi/CDTi)

This specialized tool is designed for locking the camshaft and crankshaft in place during timing adjustments, ensuring precision alignment and guaranteeing optimal engine performance.

Product code: MG04A2310

Timing tool set VW, AUDI, VAG 1.8 and 2.0 TSI TFSI

Control mount for four-cylinder 1.8, 2.0 16V TSI, TFSI engines. For Audi, VW, Seat, Skoda models

Product code: MG04A2176

Engine timing tool set for Opel, Saab, Chevrolet (2.0, 2.4 Turbo engines)

A specialized timing tool set for setting and holding camshafts, crankshaft, and chain tensioner components in 2.0 and 2.4 Turbo engines. Suitable for Opel, Saab, and Chevrolet models.

Product code: MG95608

Engine timing tool set for VAG (1.8, 2.0 engines)

A comprehensive timing tool set designed for setting and locking VAG group 1.8 and 2.0 petrol engines. Ideal for Audi, VW, Seat, and Skoda models, including a camshaft adjuster tool and crankshaft pulley holding tool.

Product code: MG94108

Timing lock Jaguar, Land Rover, Range Rover 2.7 TDV6 diesel

Timing lock for Jaguar, Land Rover, Range Rover 2.7 TDV6 diesel engines. OEM codes: 303-1117, 303-1116, 303-1132, 303-1126 / 0195H.

Product code: W0582

Balance shaft lock Citroen , Peugeot , Ford , Land Rover 2.2

The purpose of the balance shaft lock tool is to prevent the balance shaft from rotating while other components are being worked on, such as timing belt replacement or engine repair. By immobilizing the balance shaft, the tool ensures accurate positioning and alignment of the related components.

Product code: W0611

Timing belt tensioner wrench, Citroen, Fiat, Peugeot, 7mm

Timing belt tensioner wrench for Citroen Berlingo, C5, C8, Jumper, Fiat Ducato, Peugeot 206, 306, 406, Boxer, Expert, 7mm.

Product code: W0614

Universal camshaft bearing tool installation and removal set

Universal camshaft bearing tool set for easy installation and removal of camshaft bearings in various engine types.

Product code: MG91562

Engine timing tool set for BMW N62/N73

Engine timing tool set for BMW N62/N73 – precisely adjusts and checks the crankshaft interval for BMW N62 and N73 engines.

Product code: MG91755

Camshaft locking tool set for VW, Audi 3.0L TFSI engine

Camshaft locking tool set for VW and Audi 3.0L TFSI engines – ensures precise camshaft timing during engine maintenance or repairs.

Product code: MG96444

Vibration damper holding tool set for VAG 1.8/2.0 TFSI engines

This tool is designed for securing the vibration damper and crankshaft pulley during maintenance and repair work on VAG 1.8 and 2.0 TFSI EA888 engines.

Product code: MG96495

Camshaft locking tool set for VW, Audi, Bentley 4.0 FSI/TFSI engines

Camshaft locking tool set for VW, Audi, Bentley 4.0 FSI/TFSI engines ensures accurate camshaft alignment during engine timing work.

Product code: MG96520

Flywheel locking tool for BMW engine repairs

Flywheel locking tool for BMW engines, designed for loosening flywheel screws, crankshaft pulley bolts, and securing the crankshaft during timing chain replacement.

Product code: MG98301

Engine timing tool set for BMW B38, B46, B48, B58 engines

13-piece engine timing tool set for BMW and Mini petrol engines (1.2L, 1.5L, and 2.0L). Designed for precise timing chain adjustments and control time settings on models from 2014 onwards.

Product code: MG98303B

Timing tool set for Renault, Nissan, Opel 1.6 DCi and 2.0/2.3 DCi engines

Specialized locking tool for camshaft gear with variable timing phases, used during timing replacement or crankshaft inspection in chain-driven engines.

Product code: MG98536A

Engine timing tool set for Opel, Renault, and Nissan 1.6, 2.0, 2.3 DCI engines

Engine timing tool set for Opel, Renault, and Nissan 1.6, 2.0, 2.3 DCI engines ensures precise camshaft and crankshaft alignment during timing work.

Product code: MG98536J

Timing tool set for Mercedes Benz, Renault,Dacia, Nissan M282 engine

This timing tool set ensures precise camshaft and crankshaft alignment during timing adjustments and maintenance.

Product code: MG99282

Lock timing Porsche 2.5; 2.7; 3.2; 3.4

This tool is used to immobilize the camshafts and crankshaft in their proper positions during timing belt or chain replacement, as well as other engine maintenance tasks.

Product code: W0623

Camshaft timing tool set for VAG 1.0/1.2/1.4 EA 211 engines

Comprehensive camshaft timing tool set for VAG EA211 engines, compatible with 1.0L, 1.2L, 1.4L turbo, and 2.0L FSi, TSi, TFSi engines. Includes OEM-equivalent tools and versatile adaptors.

Product code: MG91664

Camshaft adjustment tool for VW, Audi EA888 engine

A specialized camshaft adjustment tool designed for VW and Audi EA888 engines, ensuring precise alignment and timing during engine repair or maintenance. Drive: 3/8".

Product code: MG94001

Camshaft adjuster wrench for VAG 4.2 TFSI engine

Specialized camshaft adjuster wrench for VAG 4.2L TFSI engines, designed for adjusting and fastening camshafts with a torque capacity exceeding 60Nm.

Product code: MG96477

Camshaft adjuster wrench for VAG 4.0 TFSI engine

Specialized camshaft adjuster wrench for precise alignment and adjustment of VAG 4.0 TFSI engines, used in Audi and Volkswagen models.

Product code: MG96577

Camshaft timing tool set for BMW, N42, N46, N46T

Camshaft timing tool set for BMW, N42, N46, N46T

Product code: MG50659

Balance shaft lock tool (large) for BMW (N40/N42/N45/N46)

A specialized balance shaft locking tool for BMW N40, N42, N45, and N46 engines. Features an L-shaped design with a 9mm slot, ensuring precise alignment and secure locking during engine timing procedures.

Product code: MG99565

VAG crankshaft rear oil seal installer tool set

A professional toolset for correctly installing rear crankshaft oil seals on VAG engines (VW/Audi 1.8T, 2.0T, 3.0 V6, 3.2, 4.2L). Includes precision-machined guides and thrust pieces to ensure a damage-free and accurate seal installation.

Product code: MG98545

High pressure pump sprocket removal tool for Hyundai, Kia (1.6 CRD engines)

A specialized tool for safely removing the high-pressure fuel pump sprocket on Hyundai and Kia 1.6 D4FE (U3) diesel engines (from 2018 onwards), ensuring damage-free removal while keeping the belt in place.

Product code: MG91625

Crankshaft seal removing and installing tool for VAG (2.5 diesel engines)

This tool is designed for the precise and safe removal and installation of the crankshaft seal on various VAG 2.5 diesel engines. It is an essential tool for mechanics and technicians working on compatible Volkswagen models, ensuring the correct alignment of the main seal housing and the crankshaft sensor.

Product code: MG97035

Timing tools VW/Seat/Skoda 1.2 6v and 12v

A specialized toolset for adjusting and locking camshafts and crankshafts in 1.2L 6V and 12V VAG engines. Compatible with VW, Seat, and Skoda models.

Product code: C01/0280

Timing tools Opel 2,0 CDTI after 2014

Professional timing toolset for Opel/Vauxhall 2.0 CDTI engines (post-2014), ensuring precise crankshaft and fuel pump alignment. Compatible with Cascada, Insignia, and Zafira-C Tourer models.

Product code: C01/0281

Timing lock Porsche 911, Boxster, Cayman 2.7, 3.2, 3.4, 3.6, 3.8

This tool is used to lock the engine's timing components in place during maintenance or repair procedures, ensuring precise alignment and synchronization of the camshafts and crankshaft. Accurate timing is essential for optimal engine performance and efficiency.

Product code: W0626

Timing tool set for Citroen, Peugeot, DS, Opel 1.2L PureTech Euro 6.3

This timing tool set is specifically designed for Citroen, Peugeot, DS, and Opel 1.2L PureTech Euro 6.3 engines. It is suitable for 1.2 Vti (VVT) / GDI PureTech petrol engines with 3 cylinders from 2018 onwards, including the Opel 1.2L Turbo PureTech versions.

Product code: C01/0277

Camshaft lock for Ford 1.6 EcoBoost

Camshaft lock for Ford Fiesta, Focus, Galaxy, Kuga, Mondeo, Transit, Tourneo, C-Max, B-Max 1.6 EcoBoost engines.

Product code: W0457

Timing lock for Volvo 2.0 and 2.4 diesel engines

Timing lock for Volvo 2.0 and 2.4 diesel engines.

Product code: W0461

Timing lock for Renault, Nissan 3.0 DCi

Timing lock for Renault, Nissan 3.0 DCi chain driven engines. Engine code: V9X.

Product code: W0462

Timing lock for Peugeot, Citroen 1.0 and 1.2 VTi petrol engines

Timing lock for Peugeot, Citroen 1.0 and 1.2 VTi petrol engines. Engine codes: EBO (ZMZ), EB2 (HMZ).

Product code: W0463

Timing lock Land Rover 2.5D / Td5 on the timing chain

A tool often used to fix the control of the Land Rover 2.5D/Td5 engine on the control locking chain. This special tool locks the timing chain in place, preventing it from moving or shifting during timing adjustment.

Product code: W0466

Timing box cover oil seal guide pin for Ford 1.8 TDCI, TDDI

This oil seal guide pin ensures a tight seal on the timing box cover, preventing oil leakage from the gearbox. This is crucial for proper engine operation and longer life.

Product code: W0635

Timing lock set for Opel 1.0, 1.2, 1.4 petrol engines with timing chain

Timing lock set for Opel and Chevrolet 1.0, 1.2, 1.4 petrol engines with timing chain (2010-).

Product code: C01/0028

Timing lock for Opel and Chevrolet 1.0, 1.2, 1.4

For chain driven petrol engines: 1.0, 1.2, 1.4 liters (2010-).

Product code: C01/0054

Variable timing cam lock for Volvo V40, S40

VCT lock for Volvo V40, S40.

Product code: W0636

Flywheel locking tool for Ford 2.0 TDCI Ecoblue and 1.0 Ecoboost

Flywheel locking tool for Ford 2.0 TDCI Ecoblue and 1.0 Ecoboost.

Product code: C01/0198

Sleeve puller and press for rear control arms of Jeep Compass, Patriot, Dodge Caliber

Left and right side rear trailing arm bushing puller and press for Jeep Compass, Patriot, Dodge Caliber. Sleeve outer diameter: 70mm.

Product code: W0645

Lock crankshaft Audi 3.0 V6

To lock the crankshaft on Audi V6 gasoline engines, a crankshaft locking tool is used. This specialized tool helps immobilize the crankshaft, ensuring accurate timing alignment during maintenance or repair procedures.

Product code: W0331

Crankshaft lock for Ford 1.8 / 2.0 TDDI TDCI

Crankshaft lock for Ford 1.8 / 2.0 TDDI TDCI

Product code: C01/0004

Camshaft lock for Fiat, Lancia 1.2 8V Evo

Camshaft lock for Fiat, Lancia 1.2 8V Evo.

Product code: C01/0005

Timing lock for Citroen, Peugeot 1.8, 2.0, 2.2

Timing lock for Citroen, Peugeot 1.8, 2.0, 2.2

Product code: C01/0006

Timing locks for Ford, Mazda, Volvo, diesel and petrol engines

Timing locks for Ford, Mazda, Volvo 1.8 / 2.5 diesel, 1.25, 1.4, 1.6, 1.7, 1.8, 2.0 16V petrol engines

Product code: C01/0009

Timing lock for BMW 1.8 and 2.0, N42, N46, N46T Valvetronic petrol engines

Timing lock for BMW 1.8 and 2.0, N42, N46, N46T Valvetronic petrol engines.

Product code: C01/0012

Timing locks for Ford, Mazda, Volvo 1.25, 1.4, 1.6, 1.7, 1.8 16V

Timing locks for Ford, Mazda, Volvo 1.25, 1.4, 1.6, 1.7, 1.8 16V petrol engines

Product code: C01/0013

Timing lock set for Citroen, Peugeot, Fiat, Iveco, Renault, Opel

Timing lock set for Citroen, Peugeot, Fiat, Iveco, Renault, Opel 2.5, 2.8 diesel engines.

Product code: C01/0015

Timing lock for Citroen and Peugeot 1.8, 2.0

Timing lock for Citroen and Peugeot 1.8, 2.0 16V engines.

Product code: C01/0016

Timing locks for Ford, Citroen, Peugeot, Volvo engines

Timing locks for Ford Duratorq, Citroen, Peugeot, Volvo 1.4, 1.6, 2.0, 2.4 engines.

Product code: C01/0018

Timing locks for Ford, Citroen, Peugeot, Volvo

Timing locks for Ford Duratorq, Citroen, Peugeot, Volvo 1.4, 1.6, 2.0, 2.4 engines.

Product code: C01/0019

Camshaft lock for VW 2.5 TDI 5-cylinder diesel engines

Camshaft lock for VW, Audi 2.5 TDI 5-cylinder diesel engines.

Product code: C01/0020

Timing lock for BMW 2.5 and 3.0 N51, N52, N52K, N53, N54 engines

Timing lock for BMW 2.5 and 3.0 N51, N52, N52K engines with Valvetronic and N53, N54 engines with direct injection.

Product code: C01/0023

Timing lock for BMW 2.5 and 3.0 N51, N52, N52K, N53, N54 engines

Timing lock for BMW 2.5 and 3.0 N51, N52, N52K engines with Valvetronic and N53, N54 engines with direct injection.

Product code: C01/0023W

Timing lock for BMW 1.6 N43, B16, B20 engines

Timing lock for BMW 1.6 N43, B16, B20 engines.

Product code: C01/0024

Timing lock for Opel 1.4

Timing lock for camshaft and chain sprocket on Opel 1.4 petrol engines (2010-)

Product code: C01/0025

Camshaft lock for Opel 1.0 petrol engines with timing chain

Camshaft lock for Opel and Chevrolet 1.0 petrol engines with timing chain (2010-).

Product code: C01/0026

Timing lock set for Opel 1.0 petrol engines with control chain

Timing lock set for Opel 1.0 petrol engines with control chain (2010-).

Product code: C01/0029

Timing tool set for BMW 1.8 and 2.0 N42, N46, N46T petrol engines

Timing tool set for disassembly and assembly of the intake camshaft of BMW 1.8 and 2.0 N42, N46, N46T Valvetronic petrol engines.

Product code: C01/0030

Locking pin for VAG injection pump

Locking pin for VW, Audi, Skoda, Seat, Ford injection pumps.

Product code: C01/0031

Timing lock set for Opel 1.2, 1.4 petrol engines (2010-)

Timing lock set for Opel 1.2, 1.4 petrol engines (2010-). Astra J, Meriva-B.

Product code: C01/0032

Camshaft lock for BMW M52 M54 M56 M52TU engines

Camshaft lock for BMW M52 M54 M56 M52TU engines.

Product code: C01/0033

Timing lock set for BMW 2.0 - 3.0 petrol engines

Timing lock set for BMW 2.0, 2.2, 2.3, 2.5, 2.8, 3.0 petrol engines.

Product code: C01/0034

Timing lock for BMW M60, M62 engines

Timing lock for BMW M60, M62, 730i, 740i, 535i, 540i, 735i, 840i, X5 engines.

Product code: C01/0038

Camshaft lock for BMW M60, M62 engines

Camshaft lock for BMW M60, M62, 730i, 740i, 535i, 540i, 735i, 740i, 840i, X5 engines.

Product code: C01/0039

Crankshaft locking pin VW, Audi, Skoda 2.5 TDI V6 Diesel

Crankshaft locking pin VW (Passat, Phaeton, Touareg), Audi (A4, A6, S6, A8, S8), Skoda (Superb) 2.5 TDI V6 Diesel

Product code: C01/0040

Timing lock set for BMW M40, M42, M43, M44, M50, M52, M54 engines

Timing lock set for BMW M40, M42, M43, M44, M50, M52, M54 engines.

Product code: C01/0042

Engine timing lock for Ford 1.0 and 1.1 Ecoboost

Engine timing lock for Ford 1.0 and 1.1 Ecoboost

Product code: C01/0043

Flywheel locking tool for Ford 1.8 TDi / TDdi / TDCi, 2.0 TDCi, 1.6 Ti-VCT engines

Flywheel locking tool set for Ford. The lock is needed for replacing the crankshaft pulley and timing belt. The set can be used petrol and diesel engines.

Product code: C01/0044

Timing lock for Ford 1.8 SCI Duratec, Mazda 2.0, 2.3 Turbo with timing chain

Timing lock for Ford 1.8 SCI Duratec, Mazda 2.0, 2.3 Turbo with timing chain.

Product code: C01/0045

Timing lock for Ford 1.8 Duratec, Mazda 2.0

Timing lock for Ford 1.8 Duratec - SCI, Mazda 2.0, 2.3 TURBO with timing chain. Flywheel lock.

Product code: C01/0046

Timing lock for BMW M43, M70, M73 engines with timing chain

Timing lock for BMW M43, M70, M73 engines with timing chain.

Product code: C01/0050

Timing lock for BMW M52, M54, M56, M52TU engines

Timing lock for BMW M52, M54, M56, M52TU engines with Vanos system.

Product code: C01/0051

BMW timing locks for engines M42, M44, M50, M52, M54

BMW timing locks - M42, M44, M50, M52, M54.

Product code: C01/0052

Timing lock for Ford 2.0l Ecoboost engine

Timing lock for Ford 2.0l Ecoboost engines with direct injection and with chain variable timing.

Product code: C01/0055

Timing lock for Opel, Suzuki 1.0 12V, 1.2 and 1.4 16V petrol engines

Timing lock for Opel, Suzuki 1.0 12V, 1.2 and 1.4 16V petrol engines with timing chain.

Product code: C01/0056

Timing lock for Ford 1.0 Ecoboost (belt in oil) gasoline engines

Timing lock for Ford 1.0 Ecoboost (belt in oil) gasoline engines.

Product code: C01/0058

Timing lock set for BMW M60 and M62 3.0, 3.5, 4.0, 4.4, 4.6 engines

Timing lock set for BMW M60 and M62 3.0, 3.5, 4.0, 4.4, 4.6 engines.

Product code: C01/0059

Timing locks for BMW M60 and M62 3.0, 3.5, 4.0, 4.4, 4.6 engines

Applicable for engines: M60 - 730i, 740i (94-96), M62 - 535i, 540i (96-00), 735i, 740i (96-02), 840i (93-99), X5 4, 4.6 (99-03).

Product code: C01/0060

Timing lock for Ford, Mazda 1.8 and 2.5 diesel, 1.25, 1.4, 1.6, 1.7, 1.8, 2.0 16V petrol engines

Timing lock for Ford, Mazda 1.8 and 2.5 diesel, 1.25, 1.4, 1.6, 1.7, 1.8, 2.0 16V petrol engines

Product code: C01/0061

Timing lock for Ford, Peugeot, Citroen, Land Rover, Volvo 2.0 and 2.2 engines

Timing lock for Ford, Peugeot, Citroen, Land Rover, Volvo 2.0 and 2.2 engines.

Product code: C01/0062

Flywheel locking tool for Ford diesel, petrol and Ecoboost engines

Four interchangeable crankshaft locking adapters required for replacing and repairing the crankshaft pulley and replacing the Ford timing belt - for gasoline, diesel engines and Ecoboost 1.0.

Product code: C01/0063

Timing lock for BMW 2.5 and 3.0 N51, N52, N52K, N53, N54 engines

The timing lock is used in N51 engines, N52 and N52K with Valvetronic, N53 and N54 engines with direct injection.

Product code: C01/0064

Timing lock for BMW dual engine block M52, M54 and M56 with Vanos

Timing lock for BMW dual engine block M52, M54 and M56 with Vanos.

Product code: C01/0065

Timing lock for BMW M40, M42, M43, M44, M50, M52, M54 engines

Timing lock for BMW M40, M42, M43, M44, M50, M52, M54 engines

Product code: C01/0066

Timing lock for BMW engines M52, M54, M56, M52TU

Lock for setting the BMW M52, M54, M56, M52TU timing differentials in Vanos systems.

Product code: C01/0068

Timing lock for BMW 2.5 and 3.0 engines N51, N52, N52K, N55

Application: N51, N52, N52K with Valvetronic and N55.

Product code: C01/0070

Timing lock for BMW 2.5 and 3.0 N51, N52, N52K N55 engines with chains

For N51, N52, N52K with Valvetronic and N55. Covers 2006 and newer Series 1, 3 and 5 models, (N52) 3.0L (Non-Turbo), (N54) 3.0L Twin Turbo engines.

Product code: C01/0072

Engine timing lock for Ford 2.0 and 2.4 diesel engines

Engine timing lock for Ford 2.0 and 2.4 diesel engines.

Product code: C01/0074

Timing lock for BMW, Mini N47 and N57 1.6, 2.0, 3.0 engines

Timing lock for BMW, Mini N47 and N57 1.6, 2.0, 3.0 engines.

Product code: C01/0075

Timing lock BMW, Mini N47 and N57 1.6 - 3.0 engines

BMW, Mini timing lock for N47, N47S, N57S and N57 1.6, 1.8, 2.0, 2.3, 2.5, 3.0 diesel engines.

Product code: C01/0076

Timing tool for BMW 1.8 and 2.0 N42, N46 engines with Valvetronic

Timing tool for BMW 1.8 and 2.0 N42, N46 engines with Valvetronic.

Product code: C01/0078

Timing lock for Ford, Land Rover 2.0L Ecoboost engines

Timing lock for Ford, Land Rover 2.0L Ecoboost engines. For engine timing regulation.

Product code: C01/0079

Camshaft lock for Audi, VW engines 2.4 2.8 30V 2.7 Turbo

Camshaft lock for Audi, VW engines 2.4 2.8 30V 2.7 Turbo

Product code: C01/0082

Adapter for setting variable camshaft unit Vanos BMW M62 and Range Rover Land Rover

Adapter for setting variable camshaft unit Vanos on BMW M62 and Range Rover Land Rover 4.4 V8 engines

Product code: C01/0085

Shaft locking pin for Audi, VW 2.4 / 2.8 30V 2.7 Turbo engines

Shaft locking pin for Audi, VW 2.4 / 2.8 30V 2.7 Turbo engines

Product code: C01/0086

Camshaft timing lock for VW 1.4 and 1.6 FSI, TFSI engines

Camshaft timing lock for Audi, VW, Seat, Skoda 1.4 and 1.6 FSI, TFSI engines with a timing chain.

Product code: C01/0088

Camshafts and crankshaft locking tool for VW 1.4 / 1.6 FSI, TFSI engines

Camshaft and crankshaft locking tool for VW 1.4 / 1.6 FSI, TFSI engines. 1.4 and 1.6 FSI Twin Cam (03-11) - engines with a timing chain.

Product code: C01/0089

Shaft locking pin for VW TSI, FSI, TFSI engines

Shaft locking pin for VW TSI, FSI, TFSI engines

Product code: C01/0090

Timing lock for VW, Audi, Seat 1,9 TDI / SDI

Timing, camshaft and crankshaft lock for 1.9 TDI / SDI engines with a vacuum pump on the camshaft.

Product code: C01/0091

Timing lock for VW, Audi, Seat 1.9 TDI / SDI

Timing, camshaft and crankshaft lock for 1.9 TDI / SDI engines with a vacuum pump on the camshaft.

Product code: C01/0092

Timing lock for BMW N40, N45 engines

Timing lock for camshafts and variators for BMW N40, N45, N45T (B16) 2001-2009 engines.

Product code: C01/0096

Injection pump sprocket lock for BMW, Mini engines N47 N57 2.0

Injection pump sprocket lock for BMW and Mini N47 2.0 D20 CU20. BMW N47 / N47S injection pump bushing to maintain gear position during disassembly of the BMW diesel pump.

Product code: C01/0099

Camshaft setting tool for VW, Audi and Porsche engines

Camshaft setting tool for VW, Audi 1.6, 2.0, 2.7, 3.0, 4.0, 4.2 TDI Common Rail and Porsche 3.0 TDi

Product code: C01/0111

Camshaft lock for Volvo 2.5 Turbo petrol engines

Camshaft lock for Volvo and Ford 2.5 Turbo petrol engines. (S40, S60, S80, V50, V70, C70, XC70, XC90, Ford Focus, S-Max, Galaxy, Mondeo).

Product code: C01/0114

Camshaft, crankshaft and chain locking tool for BMW, Mini 1.4 and 1.6 16V

Camshaft, crankshaft and chain locking tool for BMW, Mini with 1.4 and 1.6 16V engines.

Product code: C01/0115

Timing lock set for Renault 1.4, 1.6, 1.8, 2.0 16V and 1.5 DCI engines

Timing lock set for Renault 1.4, 1.6, 1.8, 2.0 16V and 1.5 DCI engines.

Product code: C01/0116

Timing locking pins for Renault, Nissan, Opel 1.5, 1.9, 2.2, 2.5 DCI

Timing locking pins for crankshaft and camshaft of Renault, Nissan, Opel 1.5, 1.9, 2.2, 2.5 DCI engines

Product code: C01/0117

Timing lock for Skoda, Audi, VW, Seat 1.4, 1.6

Timing lock for Skoda, Audi, VW, Seat 1.4, 1.6 (FSI / 16V)

Product code: C01/0118

Camshaft lock for Opel, Saab, Chevrolet 2.0l and 2.4l Turbo

Camshaft lock for Opel, Saab, Chevrolet 2.0l and 2.4l Turbo (2008-2015)

Product code: C01/0125

Timing tools set for BMW N20 and N26 petrol engines

Timing locking tools for blocking camshafts, variators, the flywheel and the chain tensioner.

Product code: C01/0126

Timing lock for Ford, Lincoln, Mazda 3.5l, 3.7l, 4.0l engines

The lock is used to set the camshaft accurately and to remove and install the timing chain. For Ford, Mazda and American cars 3.5L , 3.7L and 4.0L.

Product code: C01/0129

Camshaft lock for Opel 1.0 / 1.4 SIDI EcoFlex Turbo petrol engines

Camshaft lock for Opel Adam 1.0 / 1.4, Astra K, Corsa E SIDI EcoFlex Turbo petrol engines

Product code: C01/0130

Adapter sleeve (diameter 57mm) for belt pulley wrench for BMW diesel engines

Adapter sleeve (diameter 57mm) for belt pulley wrench for BMW diesel engines.

Product code: C01/0134

Belt pulley wrench for BMW diesel engines, 57mm

The BMW pulley wrench has a diameter of 57mm. It holds the belt pulley and the crankshaft in place.

Product code: C01/0137

Crankshaft lock for Renault, Nissan 1.5 DCI engines

Crankshaft lock for Renault, Nissan 1.5 DCI engines.

Product code: C01/0138

Camshaft and crankshaft locking pins for Renault, Nissan 1.4, 1.6 and 1.5 DCI engines

Camshaft and crankshaft locking pins for Renault, Nissan 1.4, 1.6 and 1.5 DCI engines.

Product code: C01/0139

Timing lock for Opel, Saab, Chevrolet 2.0l / 2,4l Turbo 2008-2015

Timing locks for setting the timing and tensioning timers in the Opel, Vauxhall, Saab, Chevrolet 2.0 and 2.4 Turbo engines

Product code: C01/0148

Timing lock set for Ford 1.6 Duratec Ecoboost engines

The kit includes timing belt replacement and timing adjustment tools for Ford 1.6Ti - VCT petrol engines and Duratec Ecoboost engines.

Product code: C01/0160

Timing lock for VW, Audi, Seat, Skoda 2.0 FSi / TFSi

Timing lock for VW, Audi, Seat, Skoda 2.0 FSi / TFSi with Tensioner roller key and pin for 4-cylinder engines.

Product code: C01/0161

Timing lock for VAG 1.4 - 2.0 TDI Common rail

Timing lock for VAG 1.4 - 2.0 TDI Common rail for locking the crankshaft.

Product code: C01/0163

Socket for removing rear axle nut in Mercedes Vario

Socket for removing rear axle nut in Mercedes Vario.

Product code: C01/0164

Timing lock for Renault, Opel, Nissan 1.5, 1.9, 2.2, 2.5 DCI

Timing lock for Renault, Opel, Nissan 1.5, 1.9, 2.2, 2.5 DCI.

Product code: C01/0167

Camshaft lock for Fiat 1.3 JTD Multijet, Opel 1.3 CDTI engines

Camshaft lock for Fiat 1.3 JTD Multijet, Opel 1.3 CDTI diesel engines (Opel Agila, Corsa, Combo, Astra, Tigra, Meriva, Fiat Panda, Idea, Doblo).

Product code: C01/0170

Timing lock set for Opel, Fiat 1.9 CDTI / 1.9 JTD

Timing lock set for Opel, Fiat, Alfa Romeo, Jeep, Suzuki 1.6, 1.9, 2.0 CDTI / JTD /MultiJet

Product code: C01/0171

Timing lock set for Fiat, Lancia 1.2 and 1.4 8V engines

Timing lock set for Fiat Grande Punto, Panda, Idea, Doblo and Lancia Ypsilon, Fire Evo 1.4 gasoline engines.

Product code: C01/0172

Timing lock for Renault, Nissan, Opel 2.0 DCi diesel engines

Timing lock for Renault, Nissan, Opel 2.0 DCi diesel engines.

Product code: C01/0173

Timing lock for Renault, Nissan 1.2, 1.4, 1.6, 1.8, 2.0 16V and 1.5 DCI engines

Timing lock for Renault, Nissan 1.2, 1.4, 1.6 1.8, 2.0, 2.0 Turbo 16v (98-08), 1.5 dCi.

Product code: C01/0174

Timing lock set for VAG 1.4, 1.6 FSI / TFSI

Timing lock set for VAG, Skoda, Audi, Seat, VW 1.4, 1.6 FSI / TFSI

Product code: C01/0175

Timing locking pins for Fiat 1.2, 1.4 T-Jet

Timing locking pins for Fiat, Lancia 1.2, 1.4 16V T-Jet petrol engines.

Product code: C01/0180

Timing lock set for VAG TDI 1.4, 1.6, 2.0 common rail engines

Timing lock set for VAG TDI 1.4, 1.6, 2.0 (common rail) for blocking the crankshaft, camshaft pulley and fuel pump.

Product code: C01/0181

Timing lock set for Opel, Fiat 1.6, 1.4 16V and 1.8 16V Twinport

Timing lock set for Opel, Fiat, Chevrolet, Alfa Romeo 1.6, 1.4 and 1.8 16V Twinport gasoline engines.

Product code: C01/0182

Timing lock for Fiat 1.1, 1.2 engines

Timing lock for Fiat 500, Panda, Grande Punto 1.1, 1.2

Product code: C01/0183

Timing tool for BMW, Mini, Peugeot, Citroen 1.4 and 1.6 engines

Timing tool for BMW, Mini, Peugeot, Citroen 1.4 and 1.6 engines.

Product code: C01/0184

Timing lock for BMW, Rover diesel engines with common rail

Timing lock for BMW, Rover diesel engines with common rail.

Product code: C01/0185

Timing lock for Opel, Saab, Chevrolet 1.0, 1.8, 2.0 engines

Opel valve timing control device for Opel, Saab, Chevrolet 1.0,1.8, 2.0 engines.

Product code: C01/0189

Timing lock set for Ford, Fiat, Iveco, Citroen, Peugeot 2.2 diesel engines

Timing lock set for Ford Transit 2.2 TDCI, Fiat Ducato 2.2 JTD, Iveco 2.2 HPI, Citron Jumper 2.2 HDI, Peugeot Boxer 2.2 HDI

Product code: C01/0190

Timing lock Ford 2.2 TDCI engines

Timing lock Ford 2.2 TDCI Transit, Econetic HDT diesel engines.

Product code: C01/0191

Timing lock for Citroen, Peugeot 1.0 and 1.2 THP VTI engines

Timing tool for Peuegot, Citroen 1.0 and 1.2 VTI, e-VTI, e-THP engines.

Product code: C01/0193

Engine timing tool set for BMW 2.0D N47, N47S, N57, N57S engines

Set for setting camshafts in BMW N47, N47S, N57, N57S 2.0 diesel engines with chain drive.

Product code: C01/0194

Timing lock for Ford Transit TDCI EcoBlue 2016-

Tool for dismantling the injection pump assembly in Ford 2.0 D EcoBlue TDCi (2016 and onward) engines. Using the tool, no adjustment required on the pump after reassembly.

Product code: C01/0195

Timing lock set for Ford 2.0 TDCi EcoBlue

A set for locking the timing in Ford 2.0 TDCi EcoBlue engines for the duration of the belt change.

Product code: C01/0196

Injection pump remover and installer tool kit for Ford 2.0D EcoBlue TDCi engines

A set of tools for removing the injection pump in Ford 2.0D EcoBlue TDCi engines. With this tool, no adjustment required for the pump after reassembly.

Product code: C01/0197

Timing tool for Renault, Nissan, Opel, Mercedes 1.6, 2.0, 2.3 engines

Timing tool for Renault, Nissan, Vauxhall, Opel, Mercedes-Benz 1.6, 2.0, 2.3 engines.

Product code: C01/0199

Renault, Nissan timing lock 1.6 DCI

Timing lock set for Renault, Nissan 1.6 DCI, R9M engines.

Product code: C01/0200

Timing lock for Renault, Mercedes and Nissan petrol engines

Timing lock for Renault, Mercedes, Nissan petrol engines with turbo charge.

Product code: C01/0201

Oil pump alignment and balance shaft tool for BMW N20 and N26 petrol engines

Specialized lock for the balancer shaft and oil pump designed for BMW N20 and N26 - 1.6 and 2.0 petrol engines.

Product code: C01/0203

Engine timing tool set for 1.5, 1.9, 2.2, 2.5 DCi Renault, Opel, Nissan diesel engines with chain

Engine timing tool set for 1.5, 1.9, 2.2, 2.5 DCi Renault, Opel, Nissan, Suzuki, Mitsubishi, Dacia diesel engines with chain.

Product code: C01/0215

Camshaft timing tool Mercedes Benz M156 and M159 engines

Tool for adjusting the timing during chain change for Mercedes Benz 6.2L V8 engines.

Product code: C01/0217

Timing lock for Opel, Chevrolet 2.0d VCDi SOHC diesel belt

Timing lock for Opel, Chevrolet 2.0d VCDi SOHC diesel belt.

Product code: C01/0218

Jaguar and Land Rover timing tools set for JLR 2.0 Diesel AJ200 engines

Jaguar and Land Rover timing tools set for JLR 2.0 Diesel AJ200 engines. The kit contains all the essential components required to lock the new JLR 2.0L “Ingenium”.

Product code: C01/0219

Timing lock for BMW and Mini B37, B47, B57 1.5, 2.0, 3.0 diesel engines with chains

Timing lock for BMW and Mini B37, B47, B57 1.5, 2.0, 3.0 diesel engines with chains.

Product code: C01/0223

Crankshaft lock for BMW and Mini petrol and diesel engines (2014-)

Locks the crankshaft pulley in BMW and Mini petrol engines B38, B48, B58 and diesel engines B37, B47, B57.

Product code: C01/0224

Engine timing tool set for BMW, Mini (B38, B46, B48)

This engine timing tool set was specially designed for new generation BMW and Mini chain driven B38, B46 and B48 engines since 2014.

Product code: C01/0225

Timing lock for Mercedes 1.8, 2.1 and 2.2 M651 diesel engines

Timing lock for Mercedes 1.8, 2.1 and 2.2 M651 diesel engines.

Product code: C01/0226

Timing lock for BMW N63, N74 and S63 4.4l V8 engines

For setting the timing when changing the timing chain, repairing the cylinder head, replacing the cylinder head gasket, etc.

Product code: C01/0227

Timing lock for Citroen, Peugeot, Opel 1.2 Vti (VVT), GDI

This tool kit makes it easy to change the timing belt without having to disassemble multiple components. Allows you to determine if the belt needs to be replaced without having to disassemble the engine.

Product code: C01/0230

Timing tool set for BMW N45 B20 SI engines

Timing tool set for BMW N45 B20 SI with camshaft adjuster is a special tool developed for BMW N45 B20 SI engines, which helps to fix and stabilize the engine control unit during maintenance or repair work.

Product code: W0653

Crankshaft holding tool for BMW N47 and N57 2.0, 3.0 engines with chain

Crankshaft holding tool for BMW N47 and N57 diesel engines. Essential for securing the crankshaft when replacing the timing chain.

Product code: C01/0232

Engine timing tool set for Opel 1.6 CDTI Ecoflex

Engine timing tool set for Opel 1.6 CDTI Ecoflex

Product code: C01/0237

Timing tool set for Jaguar, Land Rover Evoque 2.0T

Timing tool set for Jaguar F-Pace, XE, XF (2015 onwards), Land Rover Discovery Sport, Range Rover Evoque (2015 onwards)

Product code: C01/0238

Front axle hub disassembly and assembly kit for Ford Transit (2000-)

The set is used to disassemble and assemble the front axle hub and bearings on Ford Transits manufactured after 2000.

Product code: C02/0108WF

Bushing and silent puller and installer for VW, Audi, Skoda, Seat

Bush puller for mounting the front control arm rear trailing bushes on VW, Skoda, Audi, Seat.

Product code: C02/0113

Press for silents and bushings for VW T4, LT, Crafter and Mercedes Sprinter

The tool is used for pressing in and out the pins and silents without the disassembly of the control arm, thus saving you time and energy.

Product code: C02/0144

Silent remover and installer press with adapters for Movano, Master, Nissan

Press with bushing sleeves for the top link of the swingarm of Opel Movano, Renault Master, Nissan Interstar. Universal press for extruding and pressing pins, metal-rubber sleeves, ball pins and many elements that are within the dimensions of the press.

Product code: C02/0145

Adapter set for bushings of swingarm pins for VW T4, LT, Crafter, Mercedes Sprinter

Adapter set for bushings of swingarm pins for VW T4, LT, Crafter, Mercedes Sprinter

Product code: C02/0146

Injector puller for Fiat Ducato, Iveco Turbo Daily 2.3, 2.8, 3.0

Injector puller for Fiat Ducato, Iveco Daily, Iveco Turbo Daily 2.3, 2.8 and 3.0 (1999-).

Product code: C04/0037

Injector puller with sliding hammer for Mercedes CDI injectors

Injector puller with sliding hammer for Mercedes CDI injectors 611, 612, 613

Product code: C04/0095

Injector puller with sliding hammer for Mercedes CDI injectors

Injector puller with sliding hammer for Mercedes CDI injectors in OM611, 612 and 613 engines.

Product code: C04/0095WF

Adapter for Mercedes CDI injectors

13mm claw puller for Mercedes CDI injectors.

Product code: C04/0102

Bushing extractor and installer for Ford and Volvo

The tool is used to install and extract bushings and silents without disassembling the control arm. Enables the replacement of bushings in 4-wheel drive (4x4) cars.

Product code: C04/0211

Timing belt tensioner wrench for VW, Audi

Timing belt tensioner wrench for VW, Audi

Product code: CKB01629

Crankshaft and camshaft locking set for VW Audi V6, V8 TDI

Crankshaft locking pin, camshaft locking device for VW, Audi, Skoda V6, V8 TDI .

Product code: CKB01654

Pulley holding double pin wrench set for VW, Audi 1.9 TDI PD, 1.4 TDI engines

Pulley holding double pin wrench set for VW, Audi 1.9 TDI PD, 1.4 TDI engines. 3pcs.

Product code: CKB01886

Oil filter pliers 10"

Oil filter pliers 10". For universal use.

Product code: CKB04061

Camshaft locking bar for Ford 1.25, 1.4, 1.6, 1.7, 1.8, 2.0 16V engines

Camshaft locking bar for Ford 1.25, 1.4, 1.6, 1.7, 1.8, 2.0 16V engines

Product code: C01/0001

Timing lock set VAG 1.2, 1.4, 1.6 FSI, 1.4 TSI

Timing lock VAG 1.2, 1.4, 1.6 FSI, 1.4 TSI. Set for checking and regulating the crankshaft.

Product code: CKB08060A

Crankshaft locking pin for Volvo, Ford, Renault

This is a specialized tool that ensures stable fastening of the crankshaft during maintenance or repair. This pin allows for accurate crankshaft positioning, which is essential for proper timing adjustments and component changes.

Product code: W0655

Timing lock for Ford 1.8, 2.0 TDDI, TDCI

Timing lock for Ford Fiesta, Focus, C-Max, Transit Connect, Escort, Courier, Mondeo 1.8, 2.0 TDDI, TDCI.

Product code: W0665

Timing tool set for Jaguar and Land Rover 2.0 GTDi

Tool set to replace the timing in Jaguar XE, XF, XJ and Land Rover Discovery Sport, Freelander, Range Rover, Evoque 2.0 GTDi. OEM codes: 303748, 3031565, 3031521, 3031595, 3031594.

Product code: C01/0234

Timing tool set for BMW N51, N52, N52K, N53, N54, N55 2.5 and 3.0 engines

Timing tool set for BMW N51, N52, N52K, N53, N54, N55 2.5 and 3.0 engines. OEM: 11.4.280, 11.4.281, 11.4.282, 11.4.283, 11.4.285, 11.4.290, 11.0.300, 11.8.520/521, 11.9.340.

Product code: C01/0235

Timing tool set for Mercedes Benz M177 and M178 V8 4.0L engines

Timing tool set for Mercedes Benz M177 and M178 BiTurbo V8 4.0L engines. OEM: 177589014000, 177589001500, 177589014000, 27158900100, 177589000900.

Product code: C01/0236

Crankshaft locks for BMW, Mini 1.6, 2.0 engines

Crankshaft lock for BMW and Mini 1.6 and 2.0 Diesel Common Rail N47 engines from 2013 and on.

Product code: C01/0245

Timing tool set for Ford 1.0 EcoBoost, 2012 and on

Timing tool set for Ford 1.0 EcoBoost, 2012 and on. OEM: 303-1661-1, 303-1661-2, 303-1661-3, 310-018, 303-1602, 303-1604, 303-1603, 303-732, 303-1054, 303-1661-1, 303-1661-2, 303-1661-3, 310-018,  303-1602, 303-1604, 303-1603, 303-732, 303-1054, 303-1605/1, 303-1605/2, 303-1606/1, 303-1606/2.

Product code: C01/0248

Mercedes-Benz timing chain riveting tool set

Mercedes-Benz timing chain riveting tool set. For Mercedes Benz, Chrysler, Jeep 1.7-4.0 diesel engines.

Product code: MG04A2298

Variator wrench Audi A6 , A7 , A8 - 4.0 L TFSI

Variator wrench for Audi A6, A7, and A8 4.0L TFSI engines, designed for timing chain tensioning and precise adjustments during maintenance.

Product code: W0673

Crankshaft lock for BMW 1.6D and 2.0D (after 2013)

Crankshaft lock for BMW 1.6D and 2.0D (manufactured after 2013). Engine code: N47

Product code: W0688

Exhaust camshaft locking and wedging tool 1.2 VTI

This tool is a comprehensive set of tools designed for specific tasks related to the exhaust camshaft locking and alignment process. This kit includes various components and tools to ensure precise and efficient work.

Product code: C01/0270

Camshaft gear locking set with key VW / Audi / Seat / Skoda : 1.0 / 1.2 / 1.4 TSI and Bluemotion Petrol

By utilizing the Camshaft Gear Locking Set with Key, you can confidently perform timing-related tasks on the specified engines. It guarantees precise immobilization and alignment of the camshaft gear, facilitating accurate timing adjustments and ensuring optimal engine performance.

Product code: C01/0272

Timing tool for PSA 1.2 GDI Puretech

The timing tool for PSA 1.2 GDI Puretech is specifically engineered for use with PSA 1.2 GDI (Gasoline Direct Injection) Puretech engines.

Product code: JBM54288

Exhaust camshaft locking and alignment tool

Exhaust camshaft locking and alignment tool for replacing the timing chain on cars.

Product code: C01/0271

Timing tool set for BMW, Land Rover, Opel 2.5 TDS

If you're working on BMW, Land Rover, or Opel 2.5 TDS engines, a dedicated timing tool set is crucial for efficient and successful maintenance and repairs.

Product code: W0285

Water pump locking tool for Opel 2.2 16V

This tool is designed to immobilize the water pump pulley, allowing for secure and efficient removal or installation of the water pump and associated components. To properly replace or service the water pump in an Opel 2.2 16V engine, a water pump locking tool is often necessary.

Product code: W0350

Timing lock for Fiat 1.1, 1.2, 1.4 8V

Timing lock for Fiat Panda, Seicento, Punto, Punto EVO, Grande Punto, 500, Doblo, Doblo/Cargo 1.1, 1.2, 1.4 8V engines.

Product code: W0695

Lock timing Honda, Land Rover 2.0 TD / TDI / SDI

This lock ensures precise alignment of the camshafts and crankshaft, allowing for accurate timing adjustments and component replacements. The timing lock provides essential support during timing belt replacement, camshaft inspection, or other timing-related procedures. It immobilizes the camshafts and crankshaft, preventing any unintended movement and ensuring proper synchronization of the engine's internal components.

Product code: W0468

Air conditioning pulley locking tool for Ford S-Max, C-Max, Focus

The Air Conditioning Pulley Locking Tool for Ford S-Max, C-Max, and Focus is a specialized tool designed specifically for immobilizing the air conditioning (A/C) compressor pulley in Ford vehicles.

Product code: W0714

Timing lock Jaguar, Land Rover 4.0, 4.2, 4.4 petrol by 2010

This tool allows the camshafts to be secured securely in the engine when maintenance or repair is required. The timing gear is an extremely important part of the operation of the engine, and with the help of the fixing tool, accurate adjustment and correct installation can be carried out.

Product code: W0609

Shaft pulley lock for Ford 1.6 EcoBoost

Shaft pulley locking tool for Ford Fiesta, Fusion, Focus, C-Max, S-Max, Galaxy, Kuga, Turneo Connect, Grand Tourneo Connect, Transit Connect 1.6 EcoBoost engines.

Product code: W0459

Pulley shaft locking wrench Opel, Renault, Nissan 1.6 DCI, 2.0 DCI, 2.3 DC

Pulley shaft locking wrench Opel, Renault, Nissan 1.6 DCI, 2.0 DCI, 2.3 DC

Product code: W0495

Timing tool set for Peugeot

1.0, 1.1, 1.4, 1.6, 1.8, 1.9, 2.0 and 1.6, 1.8, 2.0, 2.2 16V (Turbo, Twin cam.) petrol, 1.4, 1.5, 1.7, 1.8, 1.9, 2.1, 2.5 D,TD,TDI, 1.4, 1.6, 2.0, 2.2 HDI

Product code: MG50685

Adjustable camshaft pulley holder, length 420mm

For tensioning or loosening the belt pulleys, adjustable opening 12-150mm.

Product code: MG50673

Camshaft holding tool

Suitable for VW, Audi, Seat and Skoda 1.2, 1.4 and 1.6 (Skoda Fabia 1.9) petrol engines. For belt pulley tightening and loosening.

Product code: MG50670

Timing tool set for VAG 1.2 TFSI

This professional-grade timing tool set is specifically designed for VAG 1.2 TFSI engines manufactured from 2010 onwards, ensuring precise and secure positioning of engine timing components during maintenance or repair work.

Product code: MG50661

Timing tool set for GM, Opel, 16V 1.6 and 1.8 engines

Alfa Romeo: 159, Chevrolet: Aveo, Cruze, Orlando. Fiat: Croma, Opel: Corsa, Astra G, Astra H, Meriva A, Zafira B, Vectra C, Signum

Product code: MG50651

Timing tool set for Alfa Romeo, Fiat, Lancia

For Alfa Romeo, Fiat, Lancia 1.4, 1.6, 1.8, 2.0 engines

Product code: MG50632

Timing tool set for Alfa Romeo, Fiat, Lancia

For Alfa Romeo 1.4, 1.6, 1.8, 2.0, 3.0 4-cylinder engines. Fiat, Lancia 1.2, 1.4, 1.6, 1.8, 2.0

Product code: MG50631

Timing tool set for Renault

Timing tool set for Renault 16v engines. Laguna, Safrane, TDC 2.0, 2.5 16v 1996-2001

Product code: MG50620

Timing tool set for Ford, Volvo, Mazda

1.25, 1.4, 1.6, 2.0, 2.3, 1.6 v16, 2.0 RS, 1.6 Ti-VRC, 1.8 SCi, 2.0 ST 150, 2.0 XHR petrol, 1.8 TDdi, 1.8 TD, 1.8, 2.2, 2.2 TDCI engines. 1.6 Ti-VCT, 2.0 TDCi engines, Focus, C-Max.

Product code: MG50619

Timing tool set for VW

Precision timing tool set designed for VAG 2.5, 4.9D/TDI PD engines. Ideal for engines with timing gears, commonly used in Volkswagen Touareg, Phaeton, and Transporter (2003-2010) models.

Product code: MG50617

Tensioner pulley wrench for VW, Audi 32mm

The tensioner pulley wrench is specifically designed for adjusting and maintaining the tensioner in Volkswagen and Audi 2.5 TDi and SDi engines. The precision design and 32mm size ensure that the tool fits perfectly, allowing you to work quickly and efficiently.

Product code: MG50615

Timing tool set for VW, Audi, Skoda, Seat

Timing belt tensioner, upper dead centre measurer, camshaft locking tool, for VW 1.4, 1.6 FSI, 1.8 Turbo, 1.8 V16, 1.8 Cupra R petrol engines

Product code: MG50603

Timing lock Opel, Fiat 1.6, 1.8 16V

Timing lock Opel, Fiat, Chevrolet 1.6, 1.8 16V Twinport engines.

Product code: W0496

Timing tool set for BMW, N52, N53, N54, 2.5, 3.0 engines

BMW, N51, N52, N53, N54, camshaft, flywheel locking tools, camshaft sensor setting tool, for 2.5, 3.0 6-cylinder DOHC 24V double Vanos aluminium/magnesium alloy petrol engines

Product code: MG50393

Timing tool set for VW, Audi, Skoda, Seat

Timing tool set for VW, Audi, Skoda, Seat, 2.0 FSI, TFSI 1.8 V16. 1.8 Cupra R petrol, 1.4, 1.9, 2.0 TDI PD engines

Product code: MG50392

Timing tool set for BMW, Mini, PSA

BMW Mini camshaft, flywheel locking tools, timing chain tensioner, for 1.4, 1.6 V16 petrol engines

Product code: MG50390

Timing tool set for Chrysler, Jeep and LDV

For 2.5 és 2.8 CRD timing belt engines, Chrysler, Jeep and LDV.

Product code: MG50386

Timing tool set for Mercedes-Benz, Chrysler, Jeep

Flywheel and camshaft locking tool, for petrol and diesel, 2.2, 2.7 CDI engines

Product code: MG50378

Timing Tool Set for Fiat, Ford, and Lancia 1.2/1.4 8V

The Timing Tool Set for Fiat, Ford, and Lancia 1.2/1.4 8V is an essential kit designed for the precise maintenance and assembly of engine timing components. This comprehensive set is specifically tailored for professionals working on a variety of models from Fiat, Lancia, and Ford.

Product code: MG50372

Timing tool set for VW, Audi, Skoda, Seat

The control mounting kit, designed for VW, Audi, Skoda and Seat vehicles, is a particularly important tool for accurate and safe assembly work. This kit allows you to accurately fix the position of the crankshaft, injector pump and V-belt tensioner for 1.2, 1.4, 1.9 and 2.0 TDI PD engines and other engine variants.

Product code: MG50365

Injector nozzle extractor set for Mercedes-Benz, Chrysler

Mercedes C-Class, E-Class, Sprinter (611, 612, 613) Chrysler Grand Cherokee 27crd (00'-)

Product code: MG50357

Timing tool set for VW, Audi

Crankshaft locking tool, camshaft locking tool, panel removal tool, shock absorber tool, ribbed belt tensioner, for 2.8 V30, 2.7 Turbo, 4.2 V40, 4.2, 5.2 FSI, 2.4, 2.6, 2.7, 2.8, 4.2, 6.0 petrol engines, 2.5, 2.7, 3.0 TDI, 3.0 TDI CR

Product code: MG50356

VAG injector puller set, SDI, TDI (PD)

Suitable for 1.4 SDI, TDI, 1.9D, SDI, TDI (PD), 2.0TDI (PD), 2.5 TDI, 2.5 TDI (PD), 2.8TDI (PD), 2.7 TDI, 3.0 TDI

Product code: MG50347

Timing tool set for Opel, Nissan, Dacia, Renault

The Timing Tool Set is a useful kit for the precise timing and maintenance of a variety of vehicles, including models from Opel, Nissan, Dacia, and Renault. This is tailored to especially the 2.2 and 2.5 DCI/DTI Renault engines and the 2.2 16V petrol engines from Opel.

Product code: MG50345

Timing tool set for BMW, N47, N47S

BMW, N47, N47S, camshaft, flywheel locking tools, crankshaft pulley holding tool, injection pump locking tool, for 4-cylinder straight 2.0 TD engines

Product code: MG50344

Timing tool set for Volvo

For 4-, 5- and 6-cylinder Twin Cam (except the 3.2l) engines

Product code: MG50340

Timing tool set for Fiat

The Timing Tool Set for Fiat vehicles, specifically designed for Twin Spark 1.4, 1.6, 1.8, and 2.0 16V double camshaft engines, is a comprehensive solution for professional mechanics focusing on precision timing and engine efficiency.

Product code: MG50327

Timing tool set, for BMW, N42, N46, N46T

Timing tool set for BMW, NN42, N46, N46T

Product code: MG50326

Timing tool set for Opel, Fiat

Camshaft, twin camshaft, flywheel locking tools, for 1.0, 1.2, 1.4, 1.6 CNG, V16, 1.8i, V16, 2.0 OPC, VXR, 2.2 petrol, 1.7 D, TD, 1.3, 1.9 D, TD, JTD, CDTi, DDIS, 2.0, 2.2 TD, TiD, TDi 2.4JTD engines

Product code: MG50321

Camshaft gear puller for Ford

Camshaft gear puller for Ford

Product code: MG50320

Timing tool set for Fiat

Timing tool set for Fiat, 1.2 1.4 1.6 1.8 16V petrol, 2.4 V10, V20 JTD, 2.0, 2.1 TD engines

Product code: MG50318

Timing tool set for VW, Audi

For 2.8 V30, 2.7 Turbo, 4.2 V40, 4.2, 5.2 FSI, 2.4, 2.6, 2.7, 2.8, 4.2, 6.0 petrol, 2.5, 2.7, 3.0 TDI, 3.0 TDI CR engines, crankshaft, camshaft locking tools

Product code: MG50316

Timing tool set for VW, Skoda, Seat

For 1.9, 2.0 TDI PD engines, plate for ribbed belt tensioner, crankshaft locking tool (for round pulley teeth), injection pump locking tool

Product code: MG50315

Timing tool set for Renault, Dacia 1.4, 1.6, 1.8, 2.0 16V

This timing tool kit is the perfect choice for a wide range of Renault and Dacia vehicles, especially those with 1.4, 1.6, 1.8, and 2.0 16V petrol engines. It's an essential aid for the precise adjustment and securing of the timing on models such as Clio, Megane, Scenic, Laguna, Espace, and Dacia Logan.

Product code: MG50314

Timing tool set for BMW, Land Rover, Opel 2.5 TD5

Timing tool set for BMW, Land Rover, Opel 2.5 TD5 diesel engines.

Product code: MG50311

Timing tool set for Opel, Suzuki

For 1.3 CDTI/DDIS chain-driven, diesel engines

Product code: MG50310A

Timing tool set for Fiat

This timing tool kit is specifically designed for a wide range of Fiat vehicles, including models like Bravo, Brava, Stilo, 500, Punto, Grande Punto, Idea, Marea, Marea Weekend, and Palio Weekend, as well as the Lancia Ypsilon, supporting 1.2 16V petrol engines. The kit is the ideal toolset for precise adjustment and securing of the engine timing system during repair and maintenance tasks.

Product code: MG50308

Timing tool set for Ford

For 1.6 Ti-VCT, 2.0 TDCi engines, Focus, C-Max

Product code: MG50305

Timing tool set for Opel, Suzuki 1.0, 1.2, 1.4

The Timing Tool Set for Opel and Suzuki 1.0, 1.2, 1.4 petrol engines is a specialized kit designed to address the precise needs of servicing vehicles with timing chain systems.

Product code: MG50304

Chain tensioner adjusting tool for BMW N63 engine

Built to ensure optimal tensioning of the chain in the twin-turbo DOHC V8 piston engine. This tool is provide precision, durability, and efficiency.

Product code: MG91754C

Timing tool set for Citroen, Peugeot

For 1.8, 2.0 petrol engines. Citroen: Xara 2.0 16V, C5 1.8, 2.0 HPI, Xara Picasso 1.8, 2.0 16V (02-05), Peugeot: 406 1.8 16V (00-04), 807 2.0 16V (02-05)

Product code: MG50302

Timing lock for Opel, Fiat, Alfa Romeo, Chevrolet 1.4, 1.6, 1.8 16V engines

Tool set for GM 16-valve engines found in Opel, Chevrolet, Fiat and Alfa Romeo models from 2003 to 2014.

Product code: W0497

Timing tool set for Renault

This timing tool set is developed for Renault's double camshaft engines, specifically designed for the 1.2, 1.4, 1.6, 1.8, and 2.0 16V petrol engines, as well as the 2.2D, TD, 2.2Td, 2.2TD, 2.5D, and 2.5D, TD diesel engines. This tool is essential for accurate and safe camshaft positioning and timing adjustment during repair and maintenance work.

Product code: MG50089

Flywheel and camshaft locking pin set, universal

Flywheel and camshaft locking pin for diesel and petrol engines.

Product code: MG50088

Timing tool set for Opel, Saab

This timing tool set includes camshaft and crankshaft locking tools tailored for 1.9 CDTI/TID engines with timing belts, commonly found in Opel and Saab vehicles. The set ensures precise alignment of the camshaft and crankshaft to facilitate smooth and accurate timing belt replacement or engine repair.

Product code: MG50087

Timing tool set for Citroen, Peugeot

The Timing Lock for Citroën and Peugeot vehicles is a comprehensive tool kit that is of great help in servicing a wide range of petrol and diesel engines. This kit is specifically designed to accommodate 1.0-2.2 liter engines and covers a wide range of models and engine configurations including 16V (Turbo, Twin Cam) petrol engines and various diesel engines such as D, TD, TDI and HDI.

Product code: MG50085

Timing tool set, for VW, Seat, Skoda

This Timing Tool Set is specifically designed for use with VAG 3-cylinder 1.2 V6 and V12 petrol engines, making it useful tool for automotive technicians working on VW, Seat, and Skoda vehicles.

Product code: MG50084

Camshaft, crankshaft, flywheel locking tool set

Camshaft, crankshaft, flywheel locking tool set for petrol and diesel belt engines, Citroen, Peugeot, VW, Opel, Rover, Isuzu, Saab, Ford, Renault, Fiat

Product code: MG50083

Timing tool set for VW, Audi, Skoda, Seat

Timing tool set for VW group, for diesel: 1.7, 1.9 D/TD/SDI/TDI; 2.5, 3.3 TDI; 1.2, 1.4, 1.9, 2.0 PD TDI, petrol: 1.4, 1.6, 1.8, 1.8T, 2.0, 2.0 16V, 2.0FSI; 1.2 6V, 1.2 12V engines

Product code: MG50082

Timing tool set for Fiat, Opel

For 1.9, 2.4 D, TD, JTD, CDTI, 1.3 CDTi, JTD Multijet, DDiS engines

Product code: MG50080

BMW crankshaft pulley holder (E39, E46, E60, E61, E81, E83, E90, E91)

Crankshaft pulley holding tool for BMW 3 and 5 Series. Holds the vibration damper when loosening or tightening the central crankshaft bolt.

Product code: MG04A4041

Timing tools set for 1.9 TDI VW

Special tool set for camshaft locking. Suitable for VW Golf, Bora, New Beetle, Seat Cordoba, Ibiza, Inca, Leon, Toledo (99-06) with 1.9 TDI engine. Contains 1pc locking tool and 2pcs bolt.

Product code: MG04A2202D

Opel 1.0 1.2 1.4 Turbo Engine Timing Tools Set

For Opel 1.0, 1.2 and 1.4 Twin Cam turbocharged engines. The kit is suitable for fixing the camshaft and the crankshaft position when removing and replacing the timing chain.

Product code: MG04A2193

Engine timing tool kit Opel Fiat Suzuki Ford 1.3 diesel engines

Engine timing tool set for Opel Fiat Suzuki Citroën, Ford, Peugeot 1.3 JTD, CDTi, TDCi, TD, DTE5 engines.

Product code: MG04A2173D

Timing chain and camshaft locking tool set for Mercedes engines

This timing chain and camshaft locking tool set is to be used on M271, DE18ML, E16ML, DE18LA, 4 cylinder, 2003-2005 Mercedes engines.

Product code: MG04A2121

Crankshaft holding wrench Opel 1.6 SIDI

Crankshaft holding wrench for Opel Cascade, Astra J, Zephyr C, Insignia 1.6 Turbo SIDI, SIDI Turbo, EcoFLEX petrol.

Product code: W0511

Engine timing locking tools set for Citroën/Peugeot 1.0/1.2 VTi

A complete shim and timing lock assembly designed for use on a wide range of vehicles Citroën/Peugeot 1.0/1.2 VTi

Product code: JBM53876

Timing tool set for Renault, Nissan, Opel, Volvo

Motor petrol: 2.0 16V / 2.5 20V / 1.4 / 1.6 16V / 1.8 / 2.0 16V / 1.2 / 1.7 / 1.8 / 2.0 16V / 2.2, Motor diesel 1.9 / 2.5 / 2.8

Product code: JBM53769

Timing tool set for Opel, Suzuki 1.0, 1.2, 1.4

Timing tool set for Opel, Suzuki 1.0, 1.2, 1.4 petrol engines with timing chain.

Product code: JBM53301

Timing tool set for Ford, Jaguar, Duratorq

For 2.0, 2.2, 2.4 TDDI, TDCI, engines with timing chain

Product code: JBM53296

Engine timing tool set renault Opel 2.2/2.5 TDi DCi

Timing tool set for Opel, Nissan, Dacia, Renault. 2.2, 2.5 DCI, DTI Renault, 2.2 16V petrol engines.

Product code: JBM53292

Audi VW enging timing tool set V6 2.0/2.8/3.0 TFSI

Audi - VW enging timing tool set. For vehicles Audia A2, A3, A4, A6, A8 with motor V6 2.0/2.8/3.0 TFSI

Product code: JBM53278

Timing tool set, for BMW, N42, N46, N46T

Timing tool set for BMW, NN42, N46, N46T

Product code: JBM53259

Ribbed belt remover and installer tool set, universal

Ribbed belt remover and installer tool set, for Alfa Romeo, Audi, BMW, Chrysler, Fiat, Ford, Mercedes, Seat, Skoda, Smart, PSA, Volvo, VW

Product code: JBM51927

Torque multiplier set for Ford 1.0/1.1 Ecoboost petrol engines

Pulley bolt torque booster for FORD EcoBoost engines, featuring a 1:5 ratio for precise tightening. Handles up to 1500Nm output torque, compatible with various FORD models and engine types.

Product code: MG98055

Key for setting the crankshaft Fiat; Opel 1.3 CDTI

This specialized tool is used to immobilize and lock the crankshaft in the correct position during timing belt replacement or other maintenance procedures.

Product code: W0512

Cam lock for Renault 2.0, 2.5, Volvo 1.6, 1.8, 1.9, 2.0, 2.2, 2.3, 2.4, 2.5

Cam lock for Renault 2.0, 2.5 and Volvo 1.6, 1.8, 1.9, 2.0, 2.2, 2.3, 2.4, 2.5 engines.

Product code: W0301

Opel 1.0, 1.2, 1.4 turbo engine timing tools set

For Opel 1.0, 1.2 and 1.4 twin cam turbocharged, chain driven, petrol engines. The kit is suitable for fixing the camshaft and the crankshaft position when removing and replacing the timing chain.

Product code: CKBA2193

Engine timing tool set for VAG 2.4 and 3.2 FSI

Professional set of locks for cars from the Volkswagen and Audi group for Audi V6, V8 and V10 with a chain for petrol engines with a capacity of 2.4, 3.2, 4.2 and 5.2 liters. It is used to check and adjust the timing.

Product code: CKBA2027

Timing lock, Audi, VW 2.7, 3.0, 4.0L engines

A professional set of locks for cars from the Volkswagen and Audi groups (VAG) with diesel engines with a capacity of 2.7, 3.0 and 4.0L.

Product code: CKB08513

Lock and pulley puller Jaguar and Land Rover

This tool is specifically designed for Jaguar and Land Rover 3.2, 3.5, 4.0, 4.2, 4.4 V8 engines. The pulley can be stably fixed or removed from the motor shaft with the help of the pulley lock and puller. This allows belt replacement or pulley maintenance during other operations.

Product code: W0525

Timing lock for VW LT 2.8 TDI

The Timing Lock for VW LT 2.8 TDI is a specialized tool designed to assist in the precise timing of the engine's camshaft and crankshaft.

Product code: W0532

Pump timing lock for Jaguar and Land Rover 2.0 diesel engines

Developed for JLR's latest 2.0L diesel engine. The kit contains all the necessary components required to lock JLR's new 2.0L "Ingenium" diesel engines into the timed position, so you can safely remove and replace the timing chain and check the engine timing.

Product code: C01/0268

Hyundai and KIA injection pump gear puller

Tool kit for professional setting, adjustment and locking of Hyundai and KIA engine timing. For 1.1, 1.4, 1.5, 1.6, 1.7 CRDi engines.

Product code: C01/0259

Timing tool for Fiat 500X and Jeep Renegade 1.0 and 1.3 petrol engines

A set of professional tools for setting, adjusting and locking the timing of the Fiat and Jeep Renegade engines (Petrol (2018-2022 and onwards).

Product code: C01/0258

Timing chain pre-tensioning tool for BMW N63, N74 engines

The tool is required when adjusting the engine timing. Attempts without this tool can lead to an incorrect setting. 

Product code: C01/0257

Crankshaft pulley locking tool for Renault, Dacia and Smart 0.9L and 1.2L engines

A bolt on a shaft pulley, designed to allow the drive of the pulley to be loosened and tightened without turning the pulley.

Product code: C01/0256

Timing lock for BMW V8 and V12 engines with timing chain

Timing lock for BMW V8 and V12, N62 and N73 3.6, 4.0, 4.4, 4.8, 6.0 engines with timing chain.

Product code: C01/0047

Timing lock for BMW M43, M70, M73 engines with timing chain

Timing lock for BMW M43, M70, M73 engines with timing chain.

Product code: C01/0049

Timing lock for BMW M42, M44, M50, M52, M54, M60, M62 engines

Timing lock for BMW M42, M44, M50, M52, M54, M60, M62 engines.

Product code: C01/0053

BMW 2.0, 2.2, 2.5, 2.8, 3.0 M52, M54, M56 double Vanos timing lock, for camshafts and chain

BMW 2.0, 2.2, 2.5, 2.8, 3.0 M52, M54, M56 double Vanos timing lock, for camshafts and chain

Product code: C01/0067

Timing lock for BMW 2.5 and 3.0 engines N54, N53

Timing lock for BMW 2.5 and 3.0. For N53 and N54 engines with direct injection.

Product code: C01/0071

Timing lock for BMW chain pulley 2.5 and 3.0 engines N53, N54

Timing lock for BMW chain pulley 2.5 and 3.0 engines N53, N54.

Product code: C01/0073

Timing lock for crankshaft and balancing shafts for BMW 2.0 and 3.0 engines

Timing lock for crankshaft and balancing shafts for BMW 2.0 and 3.0 engines N47, N47S.

Product code: C01/0077

Timing lock for BMW M60 and M62 3.0, 3.5, 4.0, 4.4, 4.6 engines

Timing lock for BMW M60 and M62 3.0, 3.5, 4.0, 4.4, 4.6 engines.

Product code: C01/0080

Timing lock for Ford, Fiat, Citroen, Peugeot 2.2 TDCI engines

Timing lock for Ford, Fiat, Citroen, Peugeot 2.2 TDCI engines.

Product code: C01/0179

Timing tool for Opel 1.0, 1.2, 1.4 engines

Timing tool for models Opel Adam, Ampera, Astra-J, Aveo, Corsa-D, Meriva-B, Mokka, Zafira-C Tourer with 1.0, 1.2, 1.4 engines.

Product code: C01/0192

Crankshaft lock for Audi 3.0 V6

Locking pin for crankshaft of Audi 3.0 V6 petrol engines

Product code: C01/0081

Timing lock set for Mini and BMW 1.8, 2.0, 3.0, 3.5 engines with common rail

The kit includes a camshaft lock, a flywheel locking pin and a crankshaft turning socket.

Product code: C01/0233

Timing lock set for Ford, Volvo 1.6 GTDI, Ecoboost 1.8, 2.0 Duratec engines

The tool set is intended for adjusting the camshaft and crankshaft in Volvo and Ford 1.6, 1.8, 2.0 cars.

Product code: C01/0221

Timing tool set for Mercedes-Benz 1.6, 2.0 M133, M270 and M274

Timing tool set for Mercedes-Benz 1.6, 2.0 M133, M270 and M274. Engine codes: 270.910 A, 274.910 B, 133.980 A, 270.920 A, 274.920 B.

Product code: C01/0246

Mercedes-Benz timing tool 1.6, 2.0 W654 (2016 - 2020 >) DIESEL

This kit is suitable for various car classes, including A, B, C, CLA, CLS, E, GLB, GLC Coupe, GLE, V Class, and Vito, equipped with the 1.6 and 2.0 W654 Chain Diesel engines.

Product code: C01/0264

Timing tool set, Fiat 1.6 16V with belt tensioner

Timing tool set, Fiat 1.6 16V with belt tensioner. Fiat: Brava/Bravo, Doblo/Cargo, Marea/Weekend, Multipla, Palio Weekend, Siena, Stilo, Lancia: Delta, Lybra.

Product code: W0009

Timing lock set for Renault, Nissan, Opel and Dacia

Timing lock Renault 1.4, 1.6, 1.8, 2.0 16V dCI gasoline enginesand 1.5 diesel engines.

Product code: W0011

Timing tool set, VW, Audi 2.5 Tdi – 5-cylinder

This Timing Tool Set is designed exclusively for the Diesel 2.5 TDI 5-cylinder engines found in select Volkswagen and Audi vehicles.

Product code: W0014

Timing tool set for VW, Audi, Skoda 2.4 - 2.8, 3.7, 4.2 engines

Timing tool set for VW, Audi, Skoda 2.4, 2.5, 2.6, 2.7, 2.8, 3.7, 4.2 V6, V8 diesel and petrol engines.

Product code: W0019

Timing tool set for Fiat, Lancia 1.2 1.4 16V

Timing tool set for Fiat, Lancia 1.2 1.4 16V. Engine codes: 176 B9.000, 182 B2.000, 188 A5.000.

Product code: W0022

Timing tool set for Ford, Mazda 16V Zetec motors

Timing tool set for Ford, Mazda 16V Zetec motors

Product code: W0023

Timing tool set for Fiat Multijet and Opel CDTI engines

Timing tool set 1.3 CDTI/JTD (Fiat Multijet, Opel CDTI).

Product code: W0025

Timing tool set for 1.4, 1.6 FSI VW, Audi, Skoda

Timing tool set for 1.4, 1.6 FSI VW, Audi, Skoda.

Product code: W0026

Timing tool set for Opel 1.0, 1.2 DOHC twin cam engines

The kit allows to set and lock the camshafts In Opel Agila, Astra-G, Corsa-B, Meriva 1.0, 1.2 12V twin cam ecotec engines.

Product code: W0030

Timing tool set, VW, Seat, Skoda 1.2 6V and 12V

A set of timing locks for 3-cylinder VW Seat Skoda 1.2 6/12V (chain driven) engines.

Product code: W0031

Timing tool set for Audi, Seat, Skoda, VW 1.4, 1.6 16V petrol engines

It is used to set the correct position of the camshafts on 1.4 and 1.6 petrol engines with double camshafts.

Product code: W0032

Timing tool set, Alfa Romeo, Opel, Fiat, Saab 1.6, 1.9, 2.0, 2.4 JTD CDTI engines

Timing tool set, Alfa Romeo, Opel, Fiat, Saab 1.6, 1.9, 2.0, 2.4 JTD CDTI engines.

Product code: W0034

Timing tool set for Alfa, Fiat, Opel 1.7, 1.9, 2.0 TD/JTD, 2.4 JTD

Timing tool set for Alfa Romeo, Fiat, Opel, Saab, Lancia 1.7, 1.9, 2.0 TD/JTD, 2.4 JTD

Product code: W0035

Camshaft lock for VW, Audi, Seat, Skoda 1.9 TDI SDI

Camshaft lock for VW, Audi, Seat, Skoda 1.9 TDI SDI.

Product code: W0036

Timing tool set, Renault, Opel, Nissan DCI 1.5, 1.9, 2.2, 2.5 DCI

Timing tool set, Renault, Opel, Nissan DCI 1.5, 1.9, 2.2, 2.5 DCI common rail diesel engines.

Product code: W0038

Tool for setting the upper dead point of the piston Fiat, Alfa, Lancia

Tool for setting the upper dead point of the piston Fiat, Alfa, Lancia

Product code: W0041

Timing tool set, Fiat Ducato, Iveco Daily 2.3 and 3.0 JTD

Timing tool set for Fiat Ducato, Iveco Daily 2.3 and 3.0 JTD diesel engines.

Product code: W0042

Timing tool set, VW, Audi, Seat, Skoda 1.9 TDI/SDI

Timing tool set, VW, Audi, Ford, Seat, Skoda 4-cyl. diesel engines 1.9 SDI, TDI.

Product code: W0043

Injection pump setting tool set for Ford 2.0/2.4 16V

The tool set is specially designed for adjusting the injection pumps of Ford Transit and Mondeo 2.0, 2.4 liter diesel engines. This kit is guaranteed to fit the mentioned engines, so you can easily maintain and adjust the injection pumps.

Product code: W0044

Axle mounting bolts, adapters for Volkswagen and Audi 2.0 - 4.2 liter engines, 3pcs

Bolts, adapters for fixing and stabilizing the shaft.

Product code: W0492

Timing tool set, Fiat and Iveco 2.3, 3.0 JTD

Timing tool set for Fiat and Iveco 2.3, 3.0 JTD engines.

Product code: W0078

Sleeve puller for Mercedes rear suspension arm

The tool allows you to remove and install the rear axle sleeves quickly and safely and without removing the suspension arm and wheel hub.

Product code: W0080

Belt pulley wrench for BMW diesel engines

Belt pulley wrench for BMW diesel, E87, E46, E60, E61, E90, E91.

Product code: W0082

Wrench for shaft belt pulley unscrewing, VW, Audi, Volvo

A special tool that can be used to unscrew the axle disc for VW, Audi and Volvo vehicles.

Product code: W0085

Timing tool set, Opel, SAAB 2.0 and 2.2 DTI with timing chain

Timing tool set, Opel, SAAB 2.0 and 2.2 DTI with timing chain

Product code: W0103

Timing tool set Citroen, Peugeot, Fiat, Iveco, Renault, Opel

Timing tool set, Citroen, Peugeot, Fiat, Iveco, Renault, Opel. 2.5 and 2.8 diesel, TDI, D, HDI, JTD.

Product code: W0117

Timing tool set VW/AUDI 2.3/2.8, petrol (2002-2005)

Timing tool set VW/AUDI 2.3/2.8, petrol (2002-2005)

Product code: W0118

Timing lock for Citroen, Peugeot, Mini 1.4 1.6 16V VTi, THP

Timing lock for Citroen, Peugeot, Mini 1.4 1.6 16V VTi, THP.

Product code: W0493

Camshaft locking tool Fiat 1.2 8V

The camshaft locking tool for Fiat 1.2 8V is a specialized tool designed for accurately locking the camshaft in place during maintenance or repair work on Fiat vehicles equipped with a 1.2-liter 8-valve engine.

Product code: W0120

Camshaft locking tool for Fiat, Lancia, Ford 1.2 8V, 1.4 8V engines

Camshaft locking tool for Fiat, Lancia, Ford 1.2 8V, 1.4 8V petrol engines

Product code: W0124

Camshaft locking tool BMW Common Rail 2.0 d, 3.0d (TU)

Camshaft locking tool BMW Common Rail 2.0 d, 3.0d (TU) with rack and pinion drive wheels.

Product code: W0126

VCT alignment tool for Ford 1.6 Ti-VCT Focus, C-Max

VCT alignment tool for Ford 1.6 Ti-VCT Focus, C-Max. Engine code: HXDA. OEM: 303-1097.

Product code: W0127

Timing tool set Ford 1.6, 1.8, 2.5 D and TD

Timing tool set Ford 1.6, 1.8, 2.5 D and TD

Product code: W0128

Camshaft locking tool VAG, VW, Ford 2.3, 2.8, 2.9 (1991-2005), steel

Camshaft locking tool VAG, VW, Ford 2.3, 2.8, 2.9 (1991-2005) chain driven engines.

Product code: W0130

Camshaft locking tool VW, Audi, Seat, Skoda 1,2; 1,4; 1,9 TDI

This camshaft locking tool allows for secure immobilization of the camshafts during timing belt replacement or other engine maintenance procedures.

Product code: W0131

Wheel lock adapter for Fiat 1.4 FIRE timing EVO2 (to replace the belt)

Timing lock adapter for timing belt replacement, FIAT 1.4 Fire EVO2. The adapter is used when the timing belt is replaced without adjusting the camshaft.

Product code: W0138

Camshaft lock for BMW

Camshaft lock for BMW M40, M43 models E30, E34, E36

Product code: W0139

Variator wrench - variable camshaft valve timing unit Alfa Romeo, Fiat

Variator wrench - variable camshaft valve timing unit Alfa Romeo, Fiat. Applications: Alfa Romeo and Fiat; Twin Cam Engines with VVC Variator

Product code: W0140

Flywheel locking tool set Ford Mazda Volvo

Flywheel locking tool set Ford Mazda Volvo petrol engines (1991-2010), 1.4 / 1.6 / 1.7 / 1.8 / 2.0 16V

Product code: W0148

Timing tool set Renault Laguna, Megane II 2.0 IDE F5R

Facilitates precise timing adjustments and alignments for specific Renault engines.

Product code: W0152

Timing tool set for Renault 2.0, 2.3 DCI and CDTI

Timing tool set for Renault, Nissan, Opel 2.0, 2.3 DCI and CDTI

Product code: W0153

Timing tool set Opel 2.2 16v chain engine

The Timing tool set Opel 2.2 16v chain engine is a reliable and efficient tool specially designed for Opel vehicles. This special tool helps to secure the engine controls, allowing you to work safely and accurately when servicing or replacing camshafts and valves.

Product code: W0154

Timing tool set Renault 1.2, 1.4, 1.6 1.8, 2.0, 2.0 16v Turbo, 1.5 dCi

Timing tool set Renault 1.2, 1.4, 1.6 1.8, 2.0, 2.0 16v Turbo, 1.5 dCi

Product code: W0156

Timing tool set BMW M42, M44 M50, M52, M52TU, M54, M56, S50US & S52US

This tool is essential for precise control work and camshaft fixing. The Timing Retainer is specially designed for the BMW engines listed to fit the camshafts perfectly and ensure an accurate and secure fit. This tool reliably secures the camshaft, allowing for accurate timing jobs and smooth installation.

Product code: W0159

Timing tool set for Ford, Mazda

Camshaft and crankshaft locking tool for 1.25-2.0 diesel and petrol engines

Product code: MG50658

Timing tool set Alfa Romeo 1.8 / 2.0 16V, 2.0 TS (blue)

This Timing Locking Tool allows you to lock engine camshafts, which is essential for timing chain replacement, timing pulleys, timing belts or other timing system component maintenance.

Product code: W0169

Timing tool set Honda, petrol and diesel 1.6, 1.8, 2.0, 2.3, 3.0 engines

This timing tool set is crafted for Honda vehicles equipped with petrol and diesel engines, ranging from 1.6 to 3.0 liters. Designed with precision, it ensures a smooth and hassle-free timing belt replacement process, especially for engines integrated with a balance shaft.

Product code: W0174

Timing tool set Volvo V 50 16 V 1.8 / 2.0 with chain - petrol

This timing tool set is designed for Volvo V50 16V 1.8 and 2.0 inline petrol engines. The tools are designed to make engine control setup and maintenance easier and more accurate.

Product code: W0177

Timing tool set, Ford, Mazda, Diesel 1.8 TDCi, TCI

Timing tool set, Ford, Mazda, Diesel 1.8 TDCi, TCI

Product code: W0178

Flywheel locking tool, Renault Laguna, Safrane, Espace 2.2 TD

Flywheel locking tool, Renault Laguna, Safrane, Espace 2.2 TD

Product code: W0179

Timing tool set for Land Rover, Jaguar

For 2.7TD V6 engines

Product code: MG50307

Camshaft sprocket puller Ford, Mazda 1.8 / 2.5 TDCI, TCI, TDDI

This puller is specifically designed to remove camshaft sprockets.

Product code: W0182

Timing tool set for BMW, Land Rover, 2.0D 16V, 1.8, 2.0, 2.5, 3.0D

Camshaft, crankshaft locking tools, timing belt tensioner, for 4- and 6-cylinder 2.0D 16V, 1.8, 2.0, 2.5, 3.0D engines

Product code: MG50096

Timing tool set for Ford, Mazda, Volvo chain driven gasoline engines

Timing tool set Ford, Mazda 16V Zetec and Volvo V50 16V 1.8, 2.0 chain driven gasoline engines.

Product code: W0185

Timing tool set VW, Audi, Skoda, Seat, 2.0, 1.2, 1.4, 1.6, 1.9 TDI

Timing tool set for VW, Audi, Skoda, Seat, 2.0, 1.2, 1.4, 1.6, 1.9 TDI engines.

Product code: W0187

Timing tool set BMW / Rover Diesel Common Rail System

Timing tool set BMW / Rover Diesel Common Rail System

Product code: W0188

Timing tool set VW LT 2.8 TDI

Timing tool set VW LT 2.8 TDI + special wrench for the camshaft

Product code: W0189

Timing tool set, Volvo / Ford 2.5 Turbo petrol

Timing tool set, Volvo / Ford 2.5 Turbo petrol

Product code: W0197

Timing tool set VW / Audi 2.4 / 3.2 TDI / 4.2 TDI - petrol

Timing tool set VW / Audi 2.4 / 3.2 TDI / 4.2 TDI - petrol

Product code: W0198

Timing tool set VW Transporter / Touareg / Phaeton, 2.5 TDI PD

The timing tool set is a special tool developed for the Volkswagen Transporter, Touareg and Phaeton models with the 2.5 liter TDI PD (Pumpe-Düse) diesel engine.

Product code: W0199

Timing tool set VW, Audi, Seat, Skoda 2.0 TDI PD

Timing tool set VW, Audi, Seat, Skoda 2.0 TDI PD

Product code: W0200

Tensioning key Fiat / Alfa Romeo / Lancia (male)

The Fiat / Alfa Romeo / Lancia Spanner (father) is a special tool specially designed for Fiat, Alfa Romeo and Lancia vehicles. This spanner has been developed for male bolts and nuts and allows you to work safely and efficiently for vehicle maintenance and repair.

Product code: W0201

Timing tool set, Fiat 1.6 16V

Timing tool set for Fiat 1.6 16V - Brava, Bravo, Doblo, Stilo, Siena, Multipla, Cargo, Marea (1995-2007) petrol engines with belt.

Product code: W0008

Tensioning key Alfa Romeo / Lancia (female)

The tension wrench specially designed for Alfa Romeo and Lancia cars is an ideal tool for its maintenance and repair. The precise design of this tool fits perfectly with specific screws and components, ensuring easy and efficient work.

Product code: W0202

Timing lock for BMW E39, E46, E61, E38, E65, E66, X3, X5 Vanos engines

Timing lock for BMW 2.0 2.2 2.3 2.5 2.8 3.0 petrol engines.

Product code: W0480

Crankshaft locking tool set VW, Audi TDI Diesel 3, 4, 5, 6 cylinders

The Crankshaft Locking Tool Set for VW and Audi TDI Diesel engines is a precise and indispensable tool for the assembly process of 3, 4, 5, and 6 cylinder engines. This set is designed to securely lock the crankshaft in place during various maintenance and repair tasks, ensuring accurate timing and preventing any unwanted movement.

Product code: W0207

Lock timing Audi 2.8 FSI / FSI 3.2 / 3.0 TFSI

This tool helps immobilize various components during timing belt or chain replacements, ensuring precise alignment and preventing any unwanted movement.

Product code: W0481

Timing belt tensioner key Audi / VW

Timing belt tensioner key Audi / VW

Product code: W0210

Timing tool set VW Crafter 2.5 TDI, Transporter LT

Timing tool set VW Crafter 2.5 TDI, Transporter LT

Product code: W0211

Crankshaft key for Volvo petrol and diesel engines

Used to counter-hold the crankshaft pulley to release and tighten the centre bolt.

Product code: W0212

Timing tool set for Chrysler, Jeep 2.5, 2.8 CRD

Timing tool set for Chrysler Voyager, Jeep Cherokee 2.5, 2.8 CRD diesel belt driven engines.

Product code: W0218

Timing tool set for Audi A8 3.7 and 4.2 V8 engines

Timing tool set Audi A8 3.7 and 4.2 V8 engines. Engine codes: ABZ, AEW, AKJ, AKG, AKH, AHC.

Product code: W0227

Injection pump gear removal BMW, Opel, Land Rover

Injection pump gear removal BMW, Opel, Land Rover

Product code: W0229

Timing belt tensioner tool Lancia, Fiat, Jeep, Ford, Crysler, Alfa Romeo

Timing belt tensioner holding wrench, Lancia, Fiat, Jeep, Ford, Crysler, Alfa Romeo 1.1, 1.2, 1.4 petrol engines with belt.

Product code: W0237

Timing tool set Fiat Bravo, Brava, Marea, Lancia Delta, Debra 1 set

High-quality timing tool set specially designed for Fiat Bravo, Brava, Marea, Lancia Delta and Dedra models with 1.8 16V 115 HP petrol engine. The green colour coding makes it quick and easy to select and identify the correct part. Perfect tool to accurately set timing when replacing timing belt or timing chain, ensuring optimum engine performance.

Product code: W0240

Timing tool set, Alfa Romeo 156, 166, GTV, Lancia 2.5, 3.0 V6 24V

Timing tool set, Alfa Romeo 156, 166, GTV (96-07) Lancia 2.5, 3.0 V6 24V, 4 cubes (red) allows the engine camshafts to be clamped during maintenance or repair work. Thanks to its red color, it can be quickly found in the toolbox or in the workshop.

Product code: W0241

Engine timing tool Audi & Škoda

Engine timing tool Audi, VW & Škoda. For vehicles Audi / VW V6 2.0 - 2.8 - 3.0T FSI , Audi Q5 2.0 - A6L 2.8 - 3.0T

Product code: JBM53276

Puller camshaft sprocket VW Audi 1.6 TDI / 2.0 TDI CR

Designed with precision and durability in mind, this puller ensures hassle-free removal of the sprockets without causing any damage to the engine components. The camshaft sprocket puller simplifies the process of dismantling the camshaft assembly.

Product code: W0242

Timing tool set VW, Audi, Seat, Skoda 1.6 TDI, 2.0 TDI Common Rail

Timing tool set VW, Audi, Seat, Skoda 1.6 TDI, 2.0 TDI Common Rail

Product code: W0243

Timing tool set BMW 2.0d N47 / N47S common rail, diesel

The Timing Tool Set specifically designed for BMW 2.0d N47/N47S common rail diesel engines. This comprehensive tool set is a must-have for precise timing adjustments, maintenance, and repairs on these specific engine models.

Product code: W0180

Timing tool set, Opel 1.6D, 1.7D, TD, DTI, DTL - Diesel

The timing tool set, Opel 1.6D, 1.7D, TD, DTI, DTL - Diesel is an important tool that helps to precisely record the engine control during necessary maintenance or repair work. For this type of engine, accurate timing of the camshafts, timing chain, timing belt, or timing belt is essential for proper engine operation and performance.

Product code: W0244

Dial indicator holder for Opel Kadett, Astra, Vectra, 1.6 / 1.7 - Diesel

Optimise control of your Opel diesel engines with the indicator clock holder, specially designed for the 1.6/1.7 diesel engines of the Opel Kadett, Astra and Vectra. This precision tool is essential for accurate timing and control adjustment, ensuring smooth engine operation and longer engine life.

Product code: W0245

Universal wrench M60/12 hex locking the camshaft pulley Subaru Impreza

Universal wrench M60/12 hex locking the camshaft pulley Subaru Impreza.

Product code: W0249

Timing tool set for Citroen and Peugeot 2.0 16V

Timing tool set for Citroen and Peugeot 2.0 16V with variable phase timing

Product code: W0255

Timing tool set Chevrolet, Opel Antara 2.0 Diesel common rail

Timing tool set Chevrolet Nubira, Evanda, Captiva, Opel Antara 2.0 Diesel common rail

Product code: W0256

Key to the water pump timing belt tensioning for Opel, Daewoo, Chevrolet

Key to the water pump timing belt tensioning for Opel, Daewoo, Chevrolet. Size: 41mm.

Product code: W0257

Wrench for water pump timing belt tensioning. Opel, Daewoo, Chevrolet, 46mm

A special key designed for tensioning the timing belt on the water pump. Opel, Daewoo, Chevrolet 46mm

Product code: W0258

Timing tool set, Volkswagen, Audi, Seat 1.9 SDI / TDI

This specialized tool set contains the necessary tools for timing and maintenance of Volkswagen, Audi, and SEAT 1.9 SDI and TDI engines. The set allows for proper locking and adjustment of the camshaft and timing belt, ensuring optimal engine performance and reliability.

Product code: W0259

Timing tool set, Renault, Nissan, Opel, 1.6 16V engines

Timing tool set, Renault, Nissan, Opel, 1.6 16V engines.

Product code: W0260

Timing tool set, Mitsubishi 1.8 - 3.5 16V

This Timing tool set is of high quality and precisely dimensioned to ensure a stable fixing of the engine timing system. The reliable fastening allows easy and efficient removal and installation of control discs, timing belts or other timing system components.

Product code: W0261

Timing tool set Ford 1.8 SCI, Mazda 2.0 / 2.3 turbo timing chain

Timing tool set Ford 1.8 SCI, Mazda 2.0 / 2.3 turbo timing chain

Product code: W0262

Camshaft pulley holder for Subaru Impreza 2.5 Boxer

Camshaft pulley holder for Subaru Impreza 2.5 Boxer.

Product code: W0263

Timing tool set Opel Vectra C 2.8 V6 timing chain, petrol

This Timing tool set helps secure the engine timing chain, allowing you to work safely and accurately when maintaining or replacing the timing system.

Product code: W0266

Timing tool set Audi 3.6 / 4.2 V8

This comprehensive tool set is specifically designed to precise timing adjustments for Audi vehicles equipped with 3.6 and 4.2 V8 engines.

Product code: W0268

Timing tool set Audi VW Skoda Seat 2.4, 2.7, 2.8, 3.0 V6 30V

Timing tool set Audi VW Skoda Seat 2.4, 2.7, 2.8, 3.0 V6 30V

Product code: W0269

Timing tool for Audi, VW 3.3, 3.7, 4.2 A6 A8

Timing tool for Audi, VW 3.3, 3.7, 4.2 A6 A8.

Product code: W0270

Timing tool set Fiat Coupe/Barchetta, Lancia, Alfa 1.8 16V (Grey)

This tool is used to fix the engine control system during maintenance or repair work. This is an especially important tool when replacing a timing chain or timing belt, when correct timing is critical to engine performance and operation.

Product code: W0272

The key to lock the crankshaft Volkswagen Audi Skoda 1.4-1.6 16V petrol

This tool is designed to fit into the engine's timing components and secure the crankshaft in place during procedures such as timing belt replacement or engine timing adjustment.

Product code: W0275

Engine timing tool set for Ford, Fiat, Iveco, Citroen, Peugeot 2.2 engines

Engine timing tool set for Ford, Fiat, Iveco, Citroen, Peugeot 2.2 engines.

Product code: W0280

Timing lock set for 1.4 FSI and TFSI, 1.6 FSI engines with timing chain

Camshaft lock set for 1.4 FSI and TFSI, 1.6 FSI engines with timing chain. For VW, Audi, Skoda, Seat engines.

Product code: W0283

Camshaft locking set Peugeot Citroen 2.7 HDI V6

Camshaft locking set Peugeot Citroen 2.7 HDI V6.

Product code: W0284

Crankshaft locking tool Opel 3.0 CDTI

The Crankshaft Locking Tool for Opel 3.0 CDTI is a specialized tool used to lock the crankshaft in place when working with the crankshaft pulley during maintenance or repair tasks on Opel vehicles equipped with the 3.0 CDTI diesel engine.

Product code: W0286

Camshaft lock VW, Audi, Seat, Skoda 1.4, 1.6 FSI

Camshaft lock VW, Audi, Seat, Skoda 1.4, 1.6 FSI. Engine codes: ARR, AVY.

Product code: W0287

Cam lock VW, Seat, Skoda and Audi 1.2 TSI, TFSI engines

Cam lock tool for VW, Skoda, Seat, Audi 1.2 TSI chain driven petrol engines.

Product code: W0292

Camshaft lock for Mercedes Benz M642, 3.0 24v V6

The Timing lock for Mercedes Benz M642, 3.0, 24v, V6 diesel engines, which is used for stable locking of camshafts. This tool helps to maintain, install and service the camshafts of Mercedes Benz M642, 3.0, 24V, V6 diesel engines.

Product code: W0600

Cam lock Ford, Peugeot, Fiat 2.2 TDCi, JTD, HDI chain (Ford engine 120HP)

This cam lock is compatible with various models, including Peugeot/Citroen HDi, Fiat Ducato JTD, and Ford Transit TDCi.

Product code: W0294

Cam lock for Fiat, Alfa Romeo, Lancia 1.4 MultiAir

Camshaft lock for Fiat, Alfa Romeo, Lancia 1.4 MultiAir engines.

Product code: W0295

Diesel engine auxiliary belt tensioning tool for Ford 2.0, 2.2, 2.4 TDDI, TDCI

Belt tensioning tool for Ford 2.0D, 2.2D Di/TDdi/TDCi and 2.4D TDdi engines with chain drive.

Product code: W0296

Cam lock set for Ford 1.6 Ti-VCT petrol engines

Camshaft, crankshaft, flywheel lock set for Ford 1.6 Ti-VCT petrol engines

Product code: W0297

Timing lock set for Ford diesel and petrol engines

Universal timing lock set for Ford diesel and petrol engines. With 3 interchangeable adapters.

Product code: W0298

Camshaft lock for Land Rover / Jaguar Diesel 2.0 Tdi, 2.5 Tds, 2.7 TDV6

This tool helps to secure the camshafts, thus allowing accurate and safe work in the maintenance or replacement of the timing system.

Product code: W0302

Crankshaft Locking Key VW/Audi/Seat/Skoda 1.8 FSI TFSI

This crankshaft locking key is designed for use with 1.8 FSI and 1.8 TFSI engines in Volkswagen, Audi, SEAT, and Skoda vehicles. It ensures the proper locking of the crankshaft during maintenance or repair, facilitating accurate and safe engine servicing.

Product code: W0303

The key to the timing belt tensioner VW, Audi bent

The timing belt tensioner wrench is specially designed to provide a precise fit and ease of use. It allows precise adjustment of the belt tension.

Product code: W0304

Puller for replacement hydraulic tappets - Opel 8V

Puller for replacing hydraulic tappets on Opel 8V engines without disassembling the camshaft.

Product code: W0307

Camshaft lock for Opel 2.0, 2.4 Ecotec engines with timing chain

Camshaft lock for Opel, Chevrolet, SAAB 2.0, 2.4 Ecotec engines with timing chain.

Product code: W0529

Kingpin adapters for crossovers Jeep - Cherokee, Grand Cherokee, Wrangler

Our set of 4 adapters is designed to simplify the mounting and dismounting of kingpins without the need to remove the steering knuckle.

Product code: W0312

Balancing shaft lock with crankshaft alignment lock BMW N47

The balancing shaft lock is designed to hold the balancing shaft(s) in place during maintenance or repair work. The tool ensures that they do not move while other components are being serviced or replaced. The crankshaft alignment lock is used to keep the crankshaft in the correct position during maintenance tasks.

Product code: W0542

Lock Belt VW / Audi / Seat / Skoda 1.8 FSI / TFSI

A Lock Belt is a special tool used to secure the pulleys of cars during service or repair. Can be used specifically for VW / Audi / Seat / Skoda 1.8 FSI / TFSI models.

Product code: W0317

Camshaft control valve socket for Audi, VW, Seat, Skoda 1.8, 2.0 FSi, TFSI

Camshaft control valve socket for Audi, VW, Seat, Skoda 1.8, 2.0 FSi, TFSI engines.

Product code: W0318

Cap rear hub Ford Transit after 2014

This special installation tool is specially designed for Ford Transit vehicles for rear wheel nuts. The tool fits directly into the hub, allowing for accurate centering and locking in the hub.

Product code: W0574

Camshaft Lock Volkswagen Audi 2.6, 2.8 V6 / V8

Specifically designed for V6 and V8 gasoline engines manufactured between 1991 and 2000. Precise design ensures accurate and reliable control adjustment during critical engine repair and maintenance tasks.

Product code: W0322

Flywheel lock for Peugeot and Citroen 1.8, 2.0, 2.2

Flywheel lock for Citroen: C4, C5, Xsara, Picasso, Evasion, Synergie, C8, Jumpy, Dispatch and Peugeot: 206, 307, 406, 607, 806, 807, Expert petrol engines.

Product code: W0323

Camshaft lock for Fiat Panda 1.1 Eco and 1.2 engines

Camshaft and crankshaft locking kit for changing the timing belt. Allows you to set the timing in the correct position. Includes camshaft alignment bracket and crankshaft lock.

Product code: W0325

Timing lock for Ford 1.25, 1.4, 1.6 16V engines

Timing lock for Ford 1.25, 1.4, 1.6 16V engines.

Product code: W0332

Timing lock for Ford, Mazda petrol Zetec engines

Camshaft locking bar and 3 pins. For 1.25, 1.4, 1.6, 1.7, 1.8, 2.0 16V and 1.8 TDI petrol engines.

Product code: W0333

Camshaft lock (locking plates) for Renault, Nissan, Opel 2.2, 2.5 dCi

A timing setting tool (setting plates) for Renault, Opel, Nissan 1.5, 1.9, 2.2, 2.5 dCI engines.

Product code: W0335

Cam Lock Alfa Romeo 1.7; 1.8 TBI

Cam Lock Alfa Romeo 1.7; 1.8 TBI is used for locking the camshafts in place during various engine maintenance and repair procedures.

Product code: W0336

Cam lock VW 2.5 TDI PD (Transporter T5, Touareg)

Cam lock VW 2.5 TDI PD (Transporter T5, Touareg) is a specialized tool designed to secure the camshafts in their proper position during maintenance and repair procedures.

Product code: W0339

Injection pump puller for Hyundai and KIA 1.6 CRDi engines

Injection pump puller for Hyundai and KIA 1.6 CRDi engines.

Product code: W0683

Timing locking pin for Renault, Opel, Nissan 1.5 DCI

For locking the crankshaft on Renault 1.5 DCI engines.

Product code: W0341

Timing locking pin fo Renault, Opel, Nissan 1.9 DCI engines

TDC timing pin used on a variety of diesel and petrol Renault engines.

Product code: W0342

Camshaft locking pins for 1.5, 1.9, 2.2, 2.5 DCi engines

A set of 3 timing locking pins for 1.5, 1.9, 2.2, 2.5 DCi engines.

Product code: W0343

Timing lock (adapter,pin) for Renault 2.0 DCi

The Timing locking (adapeter,pin) is a special tool used to maintain and service the timing system of Renault 2.0 liter diesel engines. This is a tool that helps to accurately set the timing of the engine timing and to fix the camshafts.

Product code: W0344

4 adapters to block the timing Renault / Opel / Nissan 1.5; 1.9; 2.0; 2.2 DCI (in box)

The Timing Adapter Set designed specifically for Renault, Opel, and Nissan vehicles with 1.5, 1.9, 2.0, and 2.2 DCI engines. This comprehensive set includes four adapters.

Product code: W0345

Timing lock for Citroen, Peugeot 1.8, 2.0 16V engines

Timing lock for Peugeot and Citroen gasoline engines 1.8 16V, 2.0 16V and 2.2 16V manufactured starting from 1999.

Product code: W0346

Locking camshaft and water pump Fiat / Opel 2.2 16V chain

This tool kit is suitable for securely fixing the camshaft and removing and installing the water pump on Fiat/Opel 2.2 16V chain-driven engines.

Product code: W0351

Rocker Arm Pin puller and press for Renault Scenic II; Grand Scenic II; Megane II; Dacia Logan

It is used for the disassembly and assembly of the wishbone pin at the front bottom of the vehicle.

Product code: W0352

Adapters for mounting and dismounting the front control arm bolts for Renault, Dacia

These adapters work with our universal press tool (W0099 - Universal press for bolts and sleeves). Adapters for mounting and dismounting the front control arm bolts.

Product code: W0353

Lock camshaft Chrysler 2.8L Diesel after 2007

Lock camshaft Chrysler 2.8L Diesel after 2007

Product code: W0355

Cam lock Fiat 0.9 TwinAir (chain)

When you replace or perform maintenance on the timing chain on these Fiat and Alfa Romeo models, the cam lock ensures precise fixing. This is essential so that the timing chain and associated components can be adjusted accurately, ensuring proper engine functioning.

Product code: W0356

Cam lock Citroen / Peugeot 1.4 16V "ET"

Product code: W0358

Universal key for locking the timing wheel

Universal wrench for locking timing gears. It is adjustable. Reduces the risk of damage to the camshaft and holds it in place. Length: 40cm.

Product code: W0360

Lock Camshaft Opel 1.6 / 1.7 Diesel

This tool helps to secure the camshafts, thus allowing accurate and safe work in the maintenance or replacement of the timing system.

Product code: W0363

Timing lock for Ford 1.8, Mazda 2.0, 2.3 turbo

Timing lock for Ford 1.8, Mazda 2.0, 2.3 turbo. 2003-2013. Engine codes: CFBA, L3 Turbo, LF(MZR DISI), MZR 2.0(LF).

Product code: W0373

Timing lock set for Ford 2.0 EcoBoost SCTi and Ti-VCT, 2010 and on

Timing lock set for Ford 2.0 EcoBoost SCTi and Ti-VCT petrol engines. Manufactured 2010 and onwards.

Product code: W0375

The key to rotate the crankshaft VW, Audi 2.4 / 3.2 FSI / 3.0, 4.2, 5.2 TDI Common Rail

This crankshaft turning wrench is specially designed for Volkswagen and Audi vehicles.

Product code: W0381

Timing lock for BMW 2.5, 3.0 petrol engines: N51, N52, N52K, N53, N54

Timing lock for BMW 2.5, 3.0 petrol engines with chain: N51, N52, N52K, N53, N54.

Product code: W0382

Timing lock for Opel EcoFlex 1.0, 1.2, 1.4 16 valve engines (2009 and on)

Timing lock for Opel EcoFlex 1.0, 1.2, 1.4 16 valve engines (2009 and on).

Product code: W0383

Crankshaft locking tool for BMW N12, N14, N40, N42, N45, N46, N52

The crankshaft locking tool helps to lock the crankshaft in position, thus allowing the necessary work processes to be carried out. This is extremely important, because if the crankshaft moves or does not lock properly, the timing system can be faulty, which can cause serious problems with the operation of the engine.

Product code: W0390

Lower kingpin puller for Jeep Cherokee, Grand Cherokee, Wrangler

This lower kingpin puller is designed for the knuckle pin assembly and disassembly, specifically for use on the car's bottom. It ensures efficient and safe operations for Jeep models.

Product code: W0399

Engine timing tool set for Ford and Volvo 1.6 EcoBoost

This kit has been designed for setting and adjusting the timing on 1.6L direct injection petrol engines fitted with variable valve timing.

Product code: W0405

Lock the timing VW Transporter 2.4D (95-03), Volkswagen Crafter 2.5 TDi (06-09)

The timing lock tool is a special tool used for VW Transporter 2.4D (1995-2003) and Volkswagen Crafter 2.5 TDi (2006-2009) engines.

Product code: W0408

Crankshaft pulley lock Volkswagen, Audi 1.9, 2.5 TDI

Crankshaft pulley lock for Volkswagen Transporter, LT and Audi 100, A6 1.9, 2.5 TDI engines.

Product code: W0410

Lock camshaft for Citroen 1.9D / TD engines (94-02)

This tool is specifically designed for the precision locking of the camshaft, facilitating correct timing during belt changes and other engine repair tasks. It ensures that the camshaft remains in a fixed position, preventing unwanted rotation which could lead to engine damage.

Product code: W0412

Crankshaft locking pin for Ford 1.8, 2.0 diesel engines

Securely lock your Ford 1.8 and 2.0 diesel engine's crankshaft with our locking pin. Prevent engine damage and ensure precise timing. Buy now!

Product code: W0413

Balancing shaft locking device BMW N40, N42, N45, N46

The balancing shaft locking tool developed for BMW N40, N42, N45 and N46 engines is an essential tool when replacing the timing belt, chain or camshaft.

Product code: W0417

Lock Crankshaft VW AUDI V6 diesel; gasoline

To lock the crankshaft on VW and Audi V6 diesel or gasoline engines, a crankshaft locking tool is used. This specialized tool helps immobilize the crankshaft, ensuring accurate timing alignment during maintenance or repair procedures.

Product code: W0418

Key to timing belt tensioner VW, Audi, Seat, Skoda 1.2 / 1.4 TSI / TFSI (2013) (T10499)

This is an essential tool for precise and efficient timing belt adjustments. Designed specifically for 1.2/1.4 TSI/TFSI engines found in VW, Audi, Seat, and Skoda vehicles manufactured in 2013. It ensures accurate and secure timing belt tension adjustments for optimal engine performance.

Product code: W0419

Lock timing Citroen AX 1.0, 1.1, 1.4, BX 16, 19, BX-16 Peugeot 106, 205, 405 1.0, 1.1, 1.4, 205, 305, 309

This tool helps to secure various components during a timing belt or chain change, ensuring accurate alignment and preventing unwanted movement. This tool is made of premium quality materials and ensures a precise fit and stable attachment for the mentioned car types. Easy to use and contribute to the efficiency of the car mechanic's work processes to ensure the reliable operation of the car's timing system.

Product code: W0420

Timing lock Renault, Nissan, Opel 2.0 dCi, 2.3 dCi, 2.0 CDTi

The timing lock holds the camshafts and crankshaft in the exact position, ensuring the correct synchronization of all components during timing adjustments and maintenance. This timing lock is forged from durable materials, making it reliable even under frequent usage.

Product code: W0686

Camshaft locking tool Fiat 1.2 8V EVO

This specialised tool is specifically designed for locking the camshaft of Fiat 1.2 8V EVO vehicles. Its precise construction and durable materials guarantee long life and professional workmanship.

Product code: W0121

Camshaft locking tool Alfa Romeo 145, 146, 147, 155, 156, 1.4, 1.6 16V TS

Camshaft locking tool Alfa Romeo 145, 146, 147, 155, 156, 1.4, 1.6 16V TS.

Product code: W0232

Key variator Volkswagen

On Volkswagen vehicles, the variator key (CVT variator tool) is a special tool used to disassemble or maintain the continuously variable transmission (CVT) variator. The variator key helps to disassemble and assemble the variator unit, which is responsible for the operation of the transmission.

Product code: W0290

Camshaft lock BMW N43 1.6, 2.0 (B16, B20 - on the chain)

This tool helps to secure the camshafts, thus allowing accurate and safe work in the maintenance or replacement of the timing system.

Product code: W0347

Key to regulation of the camshaft (double) VW AUDI 1.8 / 2.0 TFSI Fsi

The Key to Regulation of the Camshaft (Double) for VW AUDI 1.8/2.0 TFSI FSI engines is a specialized tool designed to assist in the precise adjustment of the camshafts in these specific engine models.

Product code: W0449

Flywheel and injection pump locking pin for BMW

Flywheel and injection pump locking pin for BMW. M40, M42, M43, M44, M50, M52, M52TU, M54, M56 engines.

Product code: W0460

Timing lock for Porsche 3.0, 3.6

This tool allows the camshafts to be secured securely in the engine when maintenance or repair is required. The timing gear is an extremely important part of the operation of the engine, and with the help of the fixing tool, accurate adjustment and correct installation can be carried out.

Product code: W0526

Rear bushing puller for Opel Corsa B, C, Tigra

Rear silent puller for Opel Corsa B, C, Tigra. Opel OEM: 24443815, 5402636.

Product code: W0539

Magnetic flywheel puller for Suzuki, M50x1,5

Magnetic flywheel puller for Suzuki, M50x1,5.

Product code: W0429

Pump sprocket remover for Hyundai and Kia 1.1, 1.4, 1.5, 1.6, 1.7 CRDI

Pump sprocket remover for Hyundai and Kia 1.1, 1.4, 1.5, 1.6, 1.7 CRDI diesel engines (from 2004). OEM: 09331-2A010, 09331-2A000.

Product code: W0476

Lock timing MERCEDES-BENZ 1.8-2.1 engines M651 MB (07-)

The kit allows positioning the camshafts in the installed position, as well as for turning, installing and removing the crankshaft pulleys.

Product code: W0478

Lock pulley shaft Volvo (T4, T5) 1.6, 2.0 GDTI

Volvo Shaft Pulley Lock tool for 1.6 and 2.0 GTDI engines (B4164T, B4164T2, B4164T3, B420T6, B420T7). Designed for secure locking of camshaft pulleys during maintenance or repair.

Product code: W0486

BMW crankshaft pulley turning tool

BMW crankshaft pulley turning tool for M47, M57, N47, N57.

Product code: W0498

Timing lock set for Ford 1.6 EcoBoost engines

Timing lock set for setting Ford 1.6 EcoBoost engines into the timed position.

Product code: W0524

Crankshaft lock Fiat Opel 1.9 D; 1.9 TD; 1.9 JTD; 2.4 JTD

The Crankshaft Lock for Fiat Opel 1.9 D, 1.9 TD, 1.9 JTD, and 2.4 JTD engines is a specialized tool designed to assist in precise and safe engine maintenance. The crankshaft lock ensures the crankshaft remains fixed in place, preventing any unintended movement during the disassembly or assembly process.

Product code: W0691

Camshaft Lock Opel 1.0 / 1.4 SIDI, EcoFlex Turbo Petrol

Camshaft Lock Opel is used for locking the camshaft in place during maintenance or repair procedures. It is specifically designed for use with Opel vehicles equipped with 1.0 or 1.4 SIDI EcoFlex Turbo Petrol engines.

Product code: W0527

Timing lock for Opel 1.6 CDTI and EcoFlex CDTI engines (2013 and onwards)

A comprehensive kit to lock the 1.6L diesel engine into its timed position for the removal and replacement of the timing chain.

Product code: W0528

Tool for setting the magnetic ring Citroen, Peugeot, Jaguar, Land Rover 2.7 ans 3.0 TD V6 HDI

Tool for setting the magnetic rings in Citroen , Peugeot , Jaguar , Land Rover 2.7 and 3.0 TD V6 HDI engines.

Product code: W0576

Socket wrench for setting the variable valve timing in Audi, VW, Seat, Skoda 1.8, 2.0 TSI

This tool is a specialized tool designed for precise adjustment of the variable valve timing mechanism during maintenance or repair procedures. This socket wrench ensures accurate positioning of the variable valve timing components, allowing for optimal engine performance.

Product code: W0540

Lock to control the timing of Saab Opel Chevrolet 1.0; 1.8; 2.0

The purpose of the device is to stably fix or lock the engine control during work processes such as replacing camshafts, adjusting valve clearance or maintaining the control chain.

Product code: W0547

Timing lock Ford 2.2 TDCI engines

Set of tools for locking the crankshaft and flywheel on Ford Transit 2.2 TDCI from 2006 and onwards for Econetic and HDT engines.

Product code: W0548

Lock timing Jeep Grand Cherokee CRD; Grand Cherokee Multijet 3.0 CRD V6

The Timing Lock is a specialized tool designed for locking the timing system of Jeep Grand Cherokee CRD and Grand Cherokee Multijet 3.0 CRD V6 vehicles. It aids in the accurate installation and adjustment of the timing belt or chain, contributing to the overall performance and longevity of the engine.

Product code: W0563

A key for locking the camshaft Fiat, Citroen 1.3 JTD

This tool is a special tool used to fix the control of Fiat and Citroen 1.3 JTD type engines. It helps to keep engine control components in a stable position while other components like camshafts, timing chain, etc. replace or service.

Product code: W0571

Chain tensioner BMW N40, N42, N45, N46, N52 and N54 / Mini N12, N14, N16 and N18

The chain tensioner can be used in BMW N40, N42, N45, N46, N52, N54 and Mini N12, N14, N16, N18 engines. The chain tensioner serves to properly tension the timing chain in the engine, ensuring accurate operation and reliability.

Product code: W0585

Timing lock for BMW E30, E36, E46, E34, E39, E38 engines

Timing lock for BMW M42, M44, M50, M52, M54, M56, M52TU, S50US, S52US.

Product code: W0595

Camshaft lock for Opel 2.0 CDTi, 2014-2017

Holds the camshaft in service position while replacing the camshaft drive belt. For Opel 2.0 CDTI, CDTI EcoFLEXengines. OEM: EN 51413, EN 955-2, EN 51412, EN 51414 and EN 51411.

Product code: W0606

Face mill cutter for the shaft Porsche 911 G 2.7, 3.0 and 3.2

This face mill cutter is specifically designed for cutting and preparing Porsche 911 G 2.7, 3.0 and 3.2 engine shafts. Thanks to the M12x1.5 thread size, it fits easily on shafts with the appropriate thread.

Product code: W0672

Key variator VW, Audi 4.2, 2.5, 5.0

The Key Variator is a specialized tool designed for VW and Audi vehicles with specific engine types, including 4.2L, 2.5L, and 5.0L engines. This tool is used for setting, adjusting, and tensioning the timing chain with a camshaft adjuster (T40079).

Product code: W0675

Adapter for setting variable camshaft unit Vanos BMW M60, M62 V8 Land Rover

The adapter is a special tool used for precise alignment and centering of certain types of engine control systems, such as the Vanos system.

Product code: W0678

Camshaft pulley holding wrench Audi, VW, Seat, Skoda 1.0, 1.2, 1.4, 1.6 TSI

Camshaft pulley holding wrench Audi, VW, Seat, Skoda 1.0, 1.2, 1.4, 1.6 TSI engines. Designed for VAG cars. It is an essential tool for accurate and efficient V-belt adjustment.

Product code: W0679

Timing wheel locking tool Subaru 2.5, Boxer

Built with precision and durability in mind, this timing wheel locking tool provides a secure and reliable method for locking the timing wheel in place during maintenance or repair procedures. By immobilizing the timing wheel, it allows for accurate alignment and tensioning of the timing belt or chain.

Product code: W0689

Wrench for loosening the shaft pulley Land Rover 2.0 TD, Rover 2.0 CDTi

The Wrench for loosening the shaft pulley is a specialized tool designed specifically for Land Rover 2.0 TD and Rover 2.0 CDTi engines.

Product code: W0690

Short crankshaft locking wrench with 3 valve adjustment tools VW, Audi, Seat, Skoda 1.8, 2.0 FSI, TFSI

Durable product used to adjust and lock the timing position of the camshaft and crankshaft.

Product code: W0696

Timing lock for Ford 1.6 Ecoboost SCTi, Ti-VCT Ecoboost

Timing lock set for holding the camshaft in service position.

Product code: W0703

Timing lock set for Audi 2.8 FSI, 3.2 FSI, 3.0 TFSI

Timing lock set for Audi A4, A5, A6, A7, A8, Q7, S4, S5, Q5, SQ5 2.8 FSI, 3.2 FSI, 3.0 TFSI. OEM: T40133-1, T40133-2, T40069.

Product code: W0704

Ford A/C compressor pulley locking wrench

The Ford A/C compressor pulley locking wrench is a specialized tool designed to immobilize the pulley of the air conditioning (A/C) compressor in Ford vehicles.

Product code: W0711

Ford Transit air conditioning pulley holding wrench

A/C compressor clutch locking wrench for Ford Transit and Transit Custom PHEV (from 2012). OEM: 412-157.

Product code: W0713

Camshaft pulley locking tool - VW 1.8 / 2.0 TFSI

The Camshaft Pulley Locking Tool for VW 1.8/2.0 TFSI is a precision-engineered device designed to assist in the maintenance and repair of gasoline engines equipped with direct injection technology, particularly the 1.0, 1.8, and 2.0 TFSI engines commonly found in Audi, Seat, Skoda, and VW vehicles.

Product code: W0723

Crankshaft pulley locking tool Audi 2.5, 2.8, 4.0 TFSI

This is an essential instrument designed to aid in the precise and secure immobilization of the crankshaft pulley during maintenance and repair tasks.

Product code: W0724

Timing lock Mini 1.6 Diesel, PSA 1.6

This is a specialized toolset engineered to facilitate precise and accurate timing adjustments in modern engines equipped with two 16V camshafts, which utilize a combination of both timing belts and chains.

Product code: W0725

Universal camshaft twin cam locking tool

This tool is an invaluable asset to working on twin cam and quad cam engines. Its primary function is to securely lock the camshafts in place, facilitating accurate valve timing during the crucial process of belt replacement. This tool is designed to fit a wide range of timing gear diameters and spacing, making it a versatile choice for various engine types.

Product code: MG96405

Press the king pins the upper and lower Jeep - Cherokee, Grand Cherokee, Wrangler

The tool is used to remove and install the kingpins in the steering knuckle assembly. Use the king pin press tool to press out the king pin from the steering knuckle. The tool will apply force to push the pin out of its housing. Once the king pin is pressed out, you can inspect it for wear or damage and replace it if necessary.

Product code: W0401

Adapters to bolts down Jeep - Cherokee, Grand Cherokee, Wrangler

Product code: W0398

Lock Flywheel Renault 1.2 / 1.6 Petrol, 1.9 D / TD

Lock Flywheel Renault 1.2 / 1.6 Petrol, 1.9 D / TD is a specialized tool designed to securely lock the flywheel in place during various maintenance and repair tasks. This lock is specifically tailored for Renault vehicles, including models such as Clio, Kangoo, Megane, Twingo, Scenic, Laguna, Express, and Expert, equipped with 1.2, 1.6, 1.9 D / TD engines.

Product code: W0327

Key - Lock crankshaft pulley Honda

Key - Lock crankshaft pulley Honda is specially designed for Honda vehicles, including Rover 618 / 623 / 620 models and Honda Prelude, Civic, Aerodeck, Accord, Accord Vtec, Legend, CRV, Shuttle engines.

Product code: W0308

Timing lock for Ford, Peugeot, Volvo - 2.0, 2.2 D

Timing lock for Ford and Peugeot 807, 607, 407, Volvo - 2.0, 2.2 D.

Product code: W0300

Fuel pump tool for Land Rover and Jaguar 2.0 diesel engines

The tool is used to remove the fuel pump without damaging the chain.

Product code: C01/0255

Timing lock and tools for high pressure fuel pump Renault 2.0 D Blue dCi from 2020

This tool is designed to ensure precise timing and secure removal of the high-pressure fuel pump and to fit the unique specifications of the Renault 2.0 D Blue dCi engine, guaranteeing compatibility and optimal performance.

Product code: C01/0261

Engine timing tool kit for BMW S54 engines

Specifically designed for the popular BMW M3 fitted with the chain driven 3.2 litre 6 cylinder 24-valve petrol engines. Engine code S54 (32 6S 4)

Product code: CKB01062

Bushing and silent press for Mercedes, VW, Renault, Opel, Nissan

The tool is used for pressing in and out the pins and silents without the disassembly of the control arm, thus saving you time and energy.

Product code: C02/0140

Renault and Peugeot rear axle bush remover and installer

Designed for the removal, installation and alignment of rear axle bushes on Renault Laguna II and Peugeot 207.

Product code: C02/0094

Engine timing kit for Hyundai, Kia 1.6 Diesel engines

Engine timing kit for Hyundai, Kia 1.6 CRDi, D4FE, D4FE (U3) Diesel engines.

Product code: C01/0231

Timing lock set for Ford 1.0 EcoBoost (Fox) LT

Ford timing lock for 1.0 Eco Boost (Fox) LT engines from 2018.

Product code: C01/0229

Timing lock for Opel engines 1.3 CDTi

A set of tools for setting, adjusting and locking the engine timing on the latest 1.3 CDTi (2015-2018) diesel engines in Opel cars.

Product code: C01/0228

BMW and Mini timing lock N13, N18 1.6 pre-tensioning tool set

Timing lock set for BMW and Mini petrol engines N13,N18 timing chains.

Product code: C01/0222

Timing tool set for Jaguar and Land Rover (V8 5.0)

The timing tool set enables the set up of correct the engine timing when replacing the timing belt.

Product code: C01/0220

Belt pulley wrench for BMW diesel engines

Belt pulley wrench for BMW diesel engines.

Product code: C01/0100

Engine timing lock set for Ford, Mazda, Peugeot, Citroen 1.4 and 1.6 diesel

Engine timing lock set for Ford, Mazda, Peugeot, Citroen 1.4 and 1.6 diesel.

Product code: C01/0017

Timing locks for Ford, Mazda, Volvo 1.4, 1.6, 2.0 16V

Timing locks for Ford, Mazda, Volvo 1.4, 1.6, 2.0 16V.

Product code: C01/0014

Camshaft lock for BMW engines M52, M54, M56

Camshaft lock for BMW Vanos engines M52, M54, M56. Tools for setting variators, cylinders, chain, main chain tension and the chain tensioner lock. 

Product code: C01/0010

Timing locks for Ford, Mazda 1.8 / 2.5 D, TD, DI, TDCI, TCI

Timing locks for Ford, Mazda 1.8 / 2.5 D, TD, DI, TDCI, TCI.

Product code: C01/0008

Cam lock set for Fiat Ducato 2.3, 3.0 JTD Iveco, Peugeot, Citroen

Cam lock set Fiat Ducato 2.3, 3.0 JTD Iveco, Peugeot, Citroen. Pins and bolts for locking and blocking the crankshaft, camshafts.

Product code: C01/0003

Timing lock set for Ford, Mazda, Volvo 1.25, 1.4, 1.6, 1.7, 1.8, 2.0 16V

Timing lock set for Ford, Mazda, Volvo 1.25, 1.4, 1.6, 1.7, 1.8, 2.0 16V. Locking pin for the shaft and two camshafts and pins for blocking the crankshaft.

Product code: C01/0002

High pressure pump tool for Nissan 2.2, 2.5 Diesel engines

Specialized tool designed to lock the gear of high-pressure injection pumps on Nissan 2.2 and 2.5 l diesel engines, ensuring accurate timing during pump removal.

Product code: MG91626