Adapter for Mercedes CDI injectors

Pneumatic injector and bearing puller set, 35pcs

Pneumatic injector puller set with air hammer, 35pcs is a specialized tool set designed for removing injectors from automotive engines using pneumatic power.

Product code: MG99091

Pneumatic injector puller set, 24pcs

Pneumatic injector puller set, 24pcs is a specialized tool set designed for removing injectors from automotive engines using pneumatic power. 20-30Nm, 5-8bar, 50L/min (1.76 CFM)

Product code: MG98784

Injector puller set with slide hammer, 25pcs

A versatile hand injector puller set designed for the safe and efficient removal of fuel injectors.

Product code: MG98786

Pneumatic injector puller set, 21pcs

Pneumatic injector puller set, 21pcs is a specialized tool set designed for removing injectors from automotive engines using pneumatic power. The set includes a pneumatic puller, a black BMC (Blow Molded Case) for storage, and color stickers for organization and identification.

Product code: MG98782

Pneumatic injector puller set, 21pcs

Pneumatic injector puller set, 21pcs is a specialized tool set designed for removing injectors from automotive engines using pneumatic power. The set includes a pneumatic puller, a black BMC (Blow Molded Case) for storage, and color stickers for organization and identification.

Product code: MG98782A

Diesel injector puller set with Common Rail adaptors

Efficiently remove stuck and seized diesel injectors with ease using our Diesel Injector Extractor Set with Common Rail adaptors. Featuring robust construction, this specialized sliding hammer allows for rapid withdrawal, even for the most severely seized injectors. Includes various adapters and sizes for all injection nozzle cars.

Product code: MG50633

Injector puller tool set, with slide hammer

Injector puller tool set, with slide hammer. For Delphi, Bosch, Denso, Siemens injectors

Product code: MG50348

Injector puller set, Bosch, Delphi, Denso, Toyota, Siemens, 10t

Injector puller set to be used with hydraulic hand pumps (not included). For M17 Bosch, M14 Delphi, M16 Toyota Adaptor, M20 Denso, M25 x 1.0 / M27 Siemens.

Product code: JBM54245

Pneumatic Injector Puller

A pneumatic injector puller is a tool used to easily and efficiently remove injectors from diesel vehicles. The tool uses pneumatic power to safely pull the injectors out of the engine, allowing for easy replacement or repair.

Product code: JBM54186

Fuel injector puller and installer tool set for BMW, Mercedes Benz

Designed to facilitate the removal and installation of fuel injectors in BMW and Mercedes Benz vehicles. Made with the highest quality materials to ensure the effective removal and installation of fuel injectors without causing damage.

Product code: JBM54220

CDi Injector Extractor Set

Cdi Injector Extractor Set a versatile tool kit designed to simplify the process of dismantling and removing injectors.

Product code: DK-230583

Injector gasket puller

For the extraction of copper sealing gaskets and washers within injector seats.

Product code: MG04A3079

Injector removal set for Ford EcoBlue 2.0 diesel

Injector removal set for Ford Edge, Focus, Galaxy, Kuga, Mondeo, Ranger, S-Max, Tourneo Custom, Transit, Transit Custom EcoBlue 2.0 diesel. OEM: 303-1706.

Product code: C04/0244

Slide hammer for injector pulling, weight 2.5kg, M12/M16

Slide hammer for injector pulling, weight 2.5kg, M12/M16.

Product code: W0067

VAG injector puller set, SDI, TDI (PD)

Suitable for 1.4 SDI, TDI, 1.9D, SDI, TDI (PD), 2.0TDI (PD), 2.5 TDI, 2.5 TDI (PD), 2.8TDI (PD), 2.7 TDI, 3.0 TDI

Product code: MG50347

Master injector extractor kit with hydraulic cylinder

Universal kit complete with hydraulic cylinder for removing seized fuel injectors. Suitable for the extraction of various diesel fuel injectors.

Product code: MG04A3117

Injector nozzle extractor set for Mercedes-Benz, Chrysler

Mercedes C-Class, E-Class, Sprinter (611, 612, 613) Chrysler Grand Cherokee 27crd (00'-)

Product code: MG50357

Injector removing tool set VAG FSI

Injector removing tool set VAG FSI

Product code: MG50363

Injector nozzle extractor set

This injector seat removal tool kit is the perfect tool for common rail systems, specifically designed for MERCEDES-BENZ CDI engines.

Product code: MG50350

BMW Common Rail injector puller set

Allows to remove the injector without disassembling the cylinder head. For BMW M47TU, M57, M57TU engines.

Product code: MG50630

Injector nozzle extractor set

The Injector Nozzle Extractor Set is a specialized toolkit designed for the precise task of removing injector nozzles from specific diesel engines. This set is particularly tailored for use with PSA 2.0 HDI engines found in Peugeot and Citroën vehicles, as well as PSA 2.0 JTD engines utilized in Fiat and Lancia models.

Product code: MG50638

Mercedes CDI injector puller, with slide hammer

For removal of stuck injectors without dismantling the cylinder head. Mercedes 611, 612, 613

Product code: MG50154

Universal injector extractor set with hydraulic cylinder

Universal extractor set for pulling out engine injectors. Includes adapters for Bosch, Delphi, Denso and Siemens injectors.

Product code: C04/0027S

Universal injector extractor set

Universal extractor set for pulling out engine injectors. Includes adaptors for Bosch, Delphi, Denso and Siemens injectors.

Product code: C04/0027

Injector puller with sliding hammer for Mercedes CDI injectors

Injector puller with sliding hammer for Mercedes CDI injectors in OM611, 612 and 613 engines.

Product code: C04/0095WF

Injector puller for Fiat Ducato, Iveco Turbo Daily 2.3, 2.8, 3.0

Injector puller for Fiat Ducato, Iveco Daily, Iveco Turbo Daily 2.3, 2.8 and 3.0 (1999-).

Product code: C04/0037

Injector puller with sliding hammer for Mercedes CDI injectors

Injector puller with sliding hammer for Mercedes CDI injectors 611, 612, 613

Product code: C04/0095

Injector puller for VW 2.0 TDI engines

Injector puller for VW 2.0 TDI engines.

Product code: C04/0093

Adapter for extracting VW TDI PD injectors

Adapter for extracting VW TDI PD injectors

Product code: C04/0097

Injector removal set for Mercedes A Class CDI

Injector removal set for Mercedes A-Class CDI, designed for both unscrewing and knocking out stubborn injectors.

Product code: W0206

Hydraulic cylinder to the pullers, press and injectors - 15 Ton

With a 15-ton pressing force, this hydraulic cylinder delivers exceptional power to handle tasks. Whether you need to remove stubborn parts, press components together or work with injectors, this cylinder provides the necessary force to get the job done efficiently.

Product code: W0432

Puller adapter for Denso M25x0.5 Toyota and Mazda injectors

Puller adapter for Denso M25x0.5 Toyota and Mazda injectors

Product code: W0534

Adapter for loosening stuck M12x1 injectors

Hardened adapter for loosening stuck M12x1 injectors. Ensures safe and efficient removal of seized injectors.

Product code: W0531

Adapter for loosening stuck M14x1 injectors

Hardened adapter for loosening stuck M14x1 injectors. Designed for durability and precision.

Product code: W0536

Injector puller for Citroen Jumper, Peugeot Boxer, Fiat 2.3 JTD HPI

Injector puller for 2.3 HPI, JTD, and HDI engines in Citroen, Peugeot, Fiat, and Iveco vehicles. Compatible with Citroen Jumper, Peugeot Boxer, Fiat Ducato Power, and Iveco Daily models.

Product code: W0560

Injector puller adapter HDI 2.0, 1.3 CDTI

Injector puller adapter HDI 2.0, 1.3 CDTI

Product code: W0409

Adapter for removing the injector in Ford Transit 2.0 Ecoblue

For removing injectors used in Ford Transit and Tourneo 2.0 TDCi with VDO, Ford Panther injection system.

Product code: W0708

Injector puller HDI Siemens M25 x 1 (hardened)

This injector puller is specially designed for HDI Siemens injectors with M25 x 1 thread.

Product code: W0394

Fiat injector puller Citroen, Iveco 2.2 TDCI, HDI, JTD

Injector puller for 2.2 TDCI, HDI, and JTD engines in Citroen, Peugeot, Fiat, Ford, and Iveco vehicles. Ideal for Citroen Jumper, Peugeot Boxer, Fiat Ducato, Ford Transit, and Iveco models.

Product code: W0556

Puller Injectors 2.0 2.2 HDI Bosch

The Puller for Injectors on 2.0 and 2.2 HDI engines with Bosch injectors is a specialized tool used for removing the injectors from the cylinder head. This puller is designed to securely fasten to two specific points: behind the valve seat and the injector body.

Product code: W0583

Injector puller Renault, Opel, Nissan 2.0 DCI and CDTI engines with chain

Injector puller for Renault Traffic , Laguna, Scenic, Vel Satis, Escape, Opel Vivaro, Insignia 2.0 DCI and CDTI with chain

Product code: W0316

Injector puller Chrysler Voyager 2.5 ; 2.8 CRD

Injector puller for Chrysler Voyager 2.5 and 2.8 CRD engines, compatible with VM 2.5 CRD and 2.8 CRD engines from 2001. Suitable for Chrysler Voyager, Grand Voyager, and Jeep Cherokee.

Product code: W0538

Injector puller for Fiat, Citroen, Iveco 3.0 HPI

Specialized puller for removing injectors from the engine block.

Product code: W0558

Injector puller 2.0 HDI

The injector puller for the 2.0 HDI engine with a 12 mm lug spacing is a specialized tool designed for removing fuel injectors.

Product code: W0411

Adapter / Puller Injector Opel Renault 2.0 DCI / CDTI and others (hardened)

Product code: W0380

Injector puller adapter, VW TDI PD

Adapter for injector pulling, VW TDI PD.

Product code: W0094

Adapter / puller injector BMW 1.8 / 2.0 N47

The Adapter/Puller Injector for BMW 1.8/2.0 N47 engines is a specialized tool designed for efficient removal and installation of injectors in BMW vehicles equipped with the N47 engine.

Product code: W0443

Injector puller Fiat Opel 1.9 JTD ; CDTI

The injector puller is a specialized tool used for removing injectors from the cylinder head of diesel engines. It is specifically designed for use with Fiat, Opel, and Lancia vehicles equipped with 1.9 JTD/CDTI diesel engines.

Product code: W0551

Injector puller Fiat Opel Suzuki 1.3 JTD , CDTI , DDIS

Injector Puller for Fiat, Opel, Suzuki, and Lancia 1.3 JTD, CDTI, DDIS engines. Ideal for safe and efficient injector removal.

Product code: W0494

Injector pulling adapter, Fiat Ducato 2.3 JTD, 15.5mm

Injector pulling adapter, Fiat Ducato 2.3 JTD. Diameter: 15.5mm

Product code: W0184

Injectors puller for Renault, Opel, Nissan, Suzuki 1.9 DCI / CDTI engines

Tool for dismantling and pulling out Renault, Nissan, Opel, Suzuki 1.9 DCI / CDTI injectors.

Product code: W0315

Puller Injectors for Citroen, Peugeot 1.6 HDI engines

This tool is specifically designed for the safe and efficient removal of injectors in Citroen and Peugeot 1.6 HDI engines.

Product code: W0314

Injector puller adapter, Opel Vivaro 2.0 CDTI - hardened

The injector puller adapter is a special tool used on Opel Vivaro 2.0 CDTI diesel engines to safely and efficiently remove or insert injectors.

Product code: W0225

Injector puller for Fiat Ducato, Iveco Daily, Iveco Turbo Daily 2.3, 2.8, 3.0

Injector puller for Fiat Ducato, Iveco Daily, Iveco Turbo Daily 2.3, 2.8, 3.0 (from 1999 onwards).

Product code: W0310

KIT to pull the injector, 10mm hex wrench, thread adapter (W0104, W0135)

Kit for removing the particularly difficult-to-extract injector.

Product code: W0137

Inertial puller for car injectors, HDI

Injector puller with slide hammer, HDI, 19 mm is a high quality and professional tool designed for the maintenance and repair of gasoline direct injection systems. This sliding hammer is specially designed for the efficient removal of injectors of HDI type engines.

Product code: W0062

Adapter for injector pulling, 1.5 DCI Delphi (14x1.5) Renault, Nissan

The injector puller adapter is specifically designed for Renault and Nissan 1.5 DCI Delphi (14x1.5) engines to provide a professional and precise tool for injector removal.

Product code: W0248

Inertial puller for car injectors, CDI

Inertial puller for car injectors, CDI

Product code: W0061

Set for dismantling of injectors, Bosch and others

Set for dismantling of injectors, Bosch and others

Product code: W0091

Set for removing injectors Delphi 2.0 HDI (12mm) (Delphi 28388960)

The purpose of the kit is to safely and efficiently remove the injectors from the given type of engine. Delphi 2.0 HDI (12mm) injectors require special handling and tools, and the tools in the kit allow professional work with these parts.

Product code: W0661

Injector puller with Bosch M17x1 system, with screw

Injector puller with system Bosch M17x1 is a specialized tool designed for removing injectors from vehicles equipped with the Bosch injection system. It is particularly suitable for cars with this specific injection system and features hardened components for enhanced durability. The injector is removed by mounting the adapter in place of the coil and the injector valve.

Product code: W0599

Adapter to pull the injectors HDI Siemens M25 x 1 (hardened)

The precision-engineered threads of this adapter ensure a perfect fit, ensuring a secure connection with the injector.

Product code: W0393

Adapter + screw of injector puller, Mercedes CDI, VW TDI; Bosch

The tool allows the safe and efficient removal of injectors from the respective engines.

Product code: W0029

Injector puller adapter, 2.0 HDI, 12mm

Puller adapter for 2.0 BlueHDi, HDI, TDCi Delphi, DS, Ford, Citroen, Peugeot injectors, 12mm.

Product code: W0663

Inertial puller for car injectors, CDI and others, with 3 axles

Injector puller with sliding hammer, for CDI and other engines, with 3 shafts (200mm, 240mm, 280mm)

Product code: W0063

Injector removal adapter for Renault 2.3 DCI, after 2012, 20mm

Injector removal adapter for Renault 2.3 DCI, after 2012, 20mm.

Product code: W0467

Inertial puller for car injectors + attachment, CDI and others

Inertial puller for car injectors, including CDI injectors, equipped with attachments for efficient and powerful removal of stubborn injectors.

Product code: W0088

Inertial puller for car injectors, Audi, VW / TD, TDI, with 2 axles

Inertial puller for car injectors, Audi, VW / TD, TDI, with 2 axles (125mm, 250mm)

Product code: W0064

Injector puller set 1.5 DCI Delphi (14x1.5) Renault, Nissan

Injector puller set 1.5 DCI Delphi (14x1.5) Renault, Nissan

Product code: W0247

Adapter for injector pulling (internal thread 17x1)

Adapter for injector pulling (internal thread 17x1). It is designed to help pull out injectors that are especially difficult to pull out.

Product code: W0135

Adapter for Opel, Fiat, Alfa Romeo 1.9 JTD injector pulling

Adapter for Opel, Fiat, Alfa Romeo 1.9 JTD injector pulling.

Product code: W0281

Adapter for injector valve pulling Opel DTI - diesel

Adapter for injector valve pulling Opel DTI - diesel

Product code: W0226

Injector knockout kit Opel Renault 2.0 DCI / CDTI and others (hardened)

The injector knockout kit is designed for the efficient removal of injectors from Opel and Renault 2.0 DCI / CDTI engines, as well as other compatible models.

Product code: W0389

Injector puller DTI Opel - Diesel common rail

This injector puller can be used to remove common rail diesel engine injectors from Opel vehicles.

Product code: W0221

Injector puller for removing Denso injectors M25x0,5 on Toyota and Mazda

The Injector Puller designed specifically for removing Denso injectors with an M25x0.5 thread on Toyota and Mazda vehicles is a versatile and reliable tool engineered to simplify the injector removal process.

Product code: W0535

Inertial puller for car injectors, Mercedes CDI, VW 1.9TDI and 2.5TDI

It helps apply a strong and controlled force to pull the injectors out of their seating.

Product code: W0018

Adapter for injector pulling, Mercedes CDI (hardened)

The adapter for pulling the injector is a special tool used in Mercedes CDI diesel engines. This adapter is made of hardened material to withstand the high pressure and load generated when removing the injectors.

Product code: W0053

Adapter for pulling Denso injectors for Toyota 2.2 170hp engines

Adapter for pulling Denso injectors for Toyota Avensis, Auris, Corolla, Rav 4 2.2 170hp engines. OEM: 23670-0R090.

Product code: W0320

Denso injector adapter puller M20x1 (hardened)

Hardened Denso injector adapter puller with M20x1 external thread and 17x1 internal thread, designed for efficient and damage-free injector removal.

Product code: W0639

Adapter set for pulling Bosch injector valves M17x1

Pullers for removing Bosch injectors from the engine. To be used with injector pullers or sliding hammers.

Product code: W0596

Injector puller Opel Vivaro 2.0 CDTI

Injector puller for Opel Vivaro 2.0 CDTI, designed for safely and efficiently removing diesel injectors.

Product code: W0220

Delphi piezoelectric injector puller for Mercedes, Kia, Hyundai

The purpose of the device is to safely and effectively remove piezoelectric injectors from the vehicle engine. The tool allows piezoelectric injectors to be removed particularly easily and without damage, allowing access to service work and ensuring correct operation.

Product code: W0589

Inertial injector puller set BMW 1.8, 2.0 N47

Inertial extractor for BMW E87, E90, E91, E92, E93 1.8d and 2.0d N47 injectors. The range of application can be expanded with more adapters.

Product code: W0439

Set of 3 Adaptors For Pneumatic Injector Puller (REF.JBM54186)

These adapters are an addition to our pneumatic injector puller product (JBM54186) line to provide additional versatility and compatibility with different types of injectors, allowing for a wider range of applications.

Product code: JBM16295