Brake and clutch fluid vacuum bleeding pump, 3L+1L

If there is air in the brake system, the brake fluid will become wet and spoil. The wheel brake cylinder will be difficult to put back and may cause brake failure. Therefore, the brake fluid should be checked and replaced periodically to ensure good braking performance. The tool pumps the new brake fluid into the master cylinder while removing air and old fluid from the system without letting air into it. Fast and efficient. A well-maintained brake system results in safe driving.

Supplied with 2 threaded, 45 mm inner diameter adapter caps, compatible with most Alfa Romeo, Audi, Bentley, BMW, Fiat, Land Rover, Lamborghini, Mercedes, Mini Cooper, Porsche, Renault, Volvo, Volkswagen, Bugatti, Chevy, Chrysler , Ford, Toyota vehicles and ABS systems.

Most cars need a maximum of 2 liters of brake fluid for an oil change, this tank can hold 3 liters. In this way, filling in too little liquid can easily be avoided. Only 10-15 psi is required during fluid transfer (MAX WP: 2 bar / 30 PSI). To prepare, read your car's owner's manual, fill the correct amount of brake fluid into the reservoir and connect it to the master cylinder, assemble the used oil bottle kit and connect it to the wheel cylinder, then pump it. Repeat on all wheel cylinders.

Vacuum technology makes the bleeding process simple and quick, and allows the mechanic to do the job alone, without the need for help.

• Large capacity : The 3 liter main tank and 1 liter auxiliary tank ensure that there is enough hydraulic fluid to flush the entire system in a single fill.
• Ease of use : The design of the device allows the venting to be carried out by yourself, thus significantly reducing the time and effort required for work.
• Safe use : The large 45 mm cap ensures a stable closure, while the 90° inclined connector provides a perfect fit for the brake systems of most European vehicle models.
• Universal connector : With a wide range of connectors included in the kit, the device is perfectly adapted to different types of vehicles and systems.

This breather pump is an ideal choice for car repair shops and workshops where speed and efficiency are essential. Due to the sufficient capacity of the tanks and the easy-to-use connectors, the venting process can be carried out smoothly and quickly. Changing the brake and clutch fluid with the vacuum bleeder pump is safe and efficient, guaranteeing flawless brake and clutch operation of vehicles.

Specifications

• 3L+1L tank with hand pump, vent valve and pressure gauge
• 45mm cap
• 40cm (1/4") long hose
• 90° inclined connector
• 9cm (3/4") breather tube with black cone connector
• Chain