Special promotions are available! Don't miss out on great deals!

Brake cylinder wind-back tool

Name: Brake cylinder wind-back tool MG50407
Brand: Lincos
SKU: MG50407
Availability: InStock

Product code: MG50407

Brand: Lincos

Brake cylinder wind-back tool, for Audi, Ford, Honda, Jaguar, Mazda, Mitsubishi, Nissan, Rover, Saab, Subaru, Toyota, VW

Product description

Description

Brake cylinder wind-back tool

Suitable for

Audi, Ford, Honda, Jaguar, Mazda, Mitsubishi, Nissan, Rover, Saab, Subaru, Toyota, VW

Product packing

Pack number	Dimensions	Weight
1	21 x 11.5 x 4.5 cm	0.67 kg

Delivery fee

Delivery method	Net price
Pickup in Nagytarcsa	0,00 €
Pickup in Debrecen	0,00 €
DHL Worldwide Express	53,13 €

More products in this category

Brake fluid change tool

Tool for efficient brake fluid replacement or air bleeding in cars, motorcycles, and trucks.

Product code: MG78012

Brake cylinder wind-back tool

Brake cylinder wind-back tool, for Audi, Ford, Honda, Jaguar, Mazda, Mitsubishi, Nissan, Rover, Saab, Subaru, Toyota, VW

Product code: MG50407

Brake and clutch system extractor, refiller and bleeder, 2l

Pneumatic brake and clutch system extractor, refiller, and bleeder with a 2L capacity. Designed for standard and ABS brake systems, featuring an integrated silencer, adjustable swivel clamp, and long silicone hoses for convenience.

Product code: MG93680D

Brake spring compressor

A brake spring compressor is a tool that allows you to safely and efficiently remove and install brake springs. Remove and install the 5/8" (16mm) to 11/16" (17.5mm) diameter retaining springs. Using the tool makes maintenance and repair processes easier.

Product code: MG04B4036

Hand held vacuum pump

A multifunction vacuum diagnostic tool with robust compact design.

Product code: MG04B4028

Pneumatic brake fluid exchange kit (10 - 40psi)

This brake bleeder kit is suitable for bleeding brake and clutch systems in vehicles with an ABS system.

Product code: MG04B4023

Heavy-duty brake pad spreader tool

Heavy-duty brake pad spreader tool is an indispensable tool for retracting the brake piston, which allows the installation of new brake pads. Fits most ATE, Bendix, Delco and Girling calipers.

Product code: MG04B4013

Brake spring pliers

Brake spring clamp for drum brakes. For removing and installing drum brake springs.

Product code: MG04B4039

Brake bleeder tool, 1L

This compact and easy-to-use device enables a quick and efficient venting process. Up to 90-120psi

Product code: MG04B4091

Brake rewind tool set, 21pcs

This 21-piece tool set is a powerful tool to properly rotate and push the piston back into the caliper during brake maintenance or replacement tasks. The set is suitable for many vehicles, making it a versatile addition to any workshop.

Product code: MG50061

Pneumatic brake caliper rewind tool set, 16pcs

This pneumatic brake caliper rewind tool set includes right- and left-handed screw threads, making it suitable for various car brands including Citroen, Audi, Fiat, Alfa Romeo, Ford, Isuzu, Honda, Jaguar, BMW, Mercedes-Benz, Mitsubishi, Nissan, Rover, Toyota, Volvo, VW, Saab, Renault, Mini, Opel, and Peugeot.

Product code: MG50065A

1/2" impact XZN bit socket set for VW brake calipers

1/2" impact XZN bit socket set for VW Transporter, LT M14 (length 43, 78mm), Golf M18 (length 43, 78mm), Sharan M16 (length 43, 78mm)

Product code: MG50385

Brake caliper rethreading tool set, M9x1.25

Brake caliper rethreading tool set, M9x1.25, for VAG, Opel, and Ford. Includes a 7mm hex key, stepped drill, M9 tap, and ten threaded inserts, along with three alignment plates in a storage case.

Product code: MG50400

Pneumatic brake fluid exchanger, 0.75l

For draining and filling in oil, bleeding, suitable for cars, motorcycles. Accurate and quick operation.

Product code: MG50445

Vacuum/pressure test kit

The Vacuum/Pressure Test Kit is a comprehensive diagnostic tool designed for a wide range of automotive testing and maintenance tasks. It is engineered to measure both vacuum and pressure levels within an automotive system.

Product code: MG50411

Vacuum tester and brake bleeding kit

This vacuum tester and brake bleeding kit is a multifunctional diagnostic tool for identifying faults in vehicle systems. With a vacuum range of 0-700 mm Hg, it includes a tank, hoses, and adapters for bleeding brake and clutch systems. Suitable for valve seals, A/C and fuel system testing, traditional and ABS brake systems, and more.

Product code: MG50404A

Brake caliper sockets for Audi Q5, A4, A5

Designed to loosen or tighten brake caliper bolts in Audi vehicles.

Product code: W0552

Vacuum and pressure gauge

Measuring range (pressure) 0.1bar, 14, 18mm coupling adapter

Product code: MG50190

Brake and clutch fluid vacuum bleeding pump, 3L+1L

It is designed to maintain the hydraulic system of the brake system and clutch.

Product code: MG93683

Dial indicator with magnetic base set

This Dial Indicator with Magnetic Base Set is an essential tool for automotive professionals, particularly useful for quickly and easily checking brake disc run-out. Its design and features make it a versatile and precise instrument for various measurement tasks in an automotive workshop.

Product code: MG97015

Hose clamp set, 4pcs

Hose clamp set, 4pcs are light and compact steel alloy construction for ease of use where space is limited.

Product code: MG04B4018

Brake and fuel hose clamp set, 2pcs

The 2-Piece Brake and Fuel Hose Clamp Set is an essential tool for any automotive repair task. Featuring a robust alloy body and a strong steel clamp arm, these clamps are specially designed for handling brake and fuel lines, as well as vacuum hoses.

Product code: MG92501

Brake caliper socket set, 11pcs

An 11-piece brake caliper socket set designed for the removal of brake caliper bolts, compatible with Audi, BMW, Ford, Mercedes, Porsche, and VW vehicles. Made from Cr-V steel for durability.

Product code: MG93283A

Brake caliper socket set, 10pcs for VAG, BMW, Mercedes, Porsche

10-piece brake caliper socket set made from durable CR-MO and 50BV30 steel, compatible with VAG, BMW, Mercedes, Porsche, and more. Includes a range of 10pt, 7pt, Hex, and Metric sockets.

Product code: MG93256A

10pcs double pipe flaring tool set

Suitable for flaring different pipes (Diameters: 5, 6, 8, 10, 12, 14, 16mm)

Product code: MG04B4092M

Double flaring brake line tool kit, 11pcs

It is suitable for making double edges of copper, aluminum, magnesium and brass pipes, as well as soft steel (max. 1mm thick) pipes. For vehicle brake pipes, cooling and heating pipes.

Product code: MG99071

6pcs brake bleeder socket & wrench set

The 6pcs brake bleeder socket & wrench set helps to drain the oil easily, and with the help of different sizes of wrenches, the brake oil drain screws can be easily removed, so maintenance work will be faster and more efficient.

Product code: MG04B4105

Professional tube bending tool for diameters 5, 6, 8, 10mm

Makes perfect bends in aluminum, copper and steel pipes.

Product code: MG04B4019

Adjustable brake caliper rewind tool set, 7pcs

7-piece adjustable brake caliper rewind set with 2- and 3-pin adaptors; suitable for vehicles with EPB systems.

Product code: MG99000

Manual/pneumatic fluid extractor, 6.5L

6.5L oil extractor with manual and pneumatic operation, includes hoses, tubes, and dipstick adapter.

Product code: MG96032

Universal adapter for brake bleeding and filling

Universal brake bleeding adapter, 28–70mm adjustable, fits reservoirs with filler cap collar, max. pressure 3.5bar.

Product code: MG96011

Brake spring washer tool

A special tool used in automotive repair and maintenance to remove and install brake springs and washers. This helps ensure the proper and safe operation of the braking system, which is critical to the overall safety and performance of the vehicle.

Product code: MG04B4037

8 PCS professional brake repairing tool

Contains the most popular brake tools used for servicing drum brakes on the most vehicles.

Product code: MG04B4040

Brake pressure test kit

Brake pressure test kit is a comprehensive kit for accurate brake pressure measurement, suitable for testing front and rear brakes.

Product code: MG04B4055

Manual brake lining gauge set

Manual brake lining gauge set a handy tool designed to accurately measure the thickness of brake linings.

Product code: MG04B4079

Brake bit socket set 7mm, 9mm, 3/8" square drive, 2pcs

A 2-piece brake bit socket set with 7mm and 9mm sizes, designed for BMW, Mercedes, and other vehicle brake linings. Fits 3/8" square drive.

Product code: MG93282

1/2" pentagon socket (14, 19mm) and bit (10mm) set

Pentagon sockets are very important in car assembly, as they are used for many car parts. For example, Allen wrenches can be used to remove or tighten the engine oil filter, suspension components, brake system components, exhaust system, and wheel bolts.

Product code: MG50401

Brake cylinder retainer remover

This specialized tool is meticulously designed for the efficient removal and installation of brake cylinders. It simplifies the process by expertly expanding and securely holding the retainer ring, ensuring a smooth operation. This tool also serves a dual purpose in facilitating the removal and installation of locking rings on drive shafts during CV joint service.

Product code: MG96116

Brake disc caliper, 0-45mm

Designed to accurately measure the thickness of brake discs. Its long body design enables use on some vehicles without the need to remove the wheel. It has a spring action plunger for quick operation and a metric scale in 1mm increments from 0 to 45mm. Suitable for use on motorcycles, cars and commercial vehicles.

Product code: MG96487

Universal drum and disc brake tool set, 15pcs

This 15-piece universal drum and disc brake tool set is a comprehensive kit designed for the replacement and cleaning of front and rear brakes on various car models. This set includes a wide range of tools to handle different aspects of brake maintenance and repair.

Product code: MG97012

Universal brake piston rewind tool adapter set, 3pcs

3-piece set with 2-pin and 3-pin adjustable brake caliper rewind adapters. Includes magnetic 2-pin 3/8" drive adapter, compatible with most vehicles and EPB (Electronic Parking Brake) tools.

Product code: MG98999

Brake piston cube 3/8" square drive

This Brake Piston Cube is an essential tool designed for retracting the parking brake piston prior to the installation of new brake pads.

Product code: MG99003

Adjustable Brake Wind-Back Adaptor Set

This Adjustable Brake Wind-Back Adaptor Set is an essential toolkit for automotive professionals involved in brake maintenance and repair. The set features two adjustable brake caliper rewind adaptors, tailored to cater to a broad spectrum of vehicles.

Product code: MG94017

Universal Brake Piston Reset Tool Set, 8pcs

This 8-piece set includes unique adjustable 2-pin, 3-pin, and 4-pin adapters along with a 3/8" adapter with a magnet. Designed for both clockwise and left-handed use, it allows for a centered reset of the brake piston, preventing tilting and avoiding damage to boots, pistons, and piston bores in the brake caliper.

Product code: MG94015K

Universal brake caliper wind back tool kit, 16pcs

Pneumatic rewind tool for disc brake pistons with adapters. Brand new practical and convenient kit for replacing front and rear disc brake pads.

Product code: DK-230540

Brake piston wind back tool set, 18pcs

Designed to push back or wind back brake pistons. Includes left-handed and right-handed thrust bolt assemblies.

Product code: DK-230542

Brake caliper thread replacement inserts, M9x1.25mm, 10pcs

10-piece stainless steel brake caliper thread replacement inserts, M9x1.25mm, designed for professional repairs of damaged or worn brake caliper threads.

Product code: MG99007A

Brake and fuel hose pinch tool

The Brake and Fuel Hose Pinch Tool is specifically crafted for the single-handed operation, allowing for a snap action to effectively clamp off flexible brake, fuel, and vacuum lines.

Product code: MG94190

Brake caliper thread repair kit, M12x1.5mm

Discover the practicality and efficiency of our Brake Caliper Thread Repair Kit, designed for the seamless repair of M12x1.5mm threads. This comprehensive set ensures accurate, durable repairs for brake caliper mounting threads, providing a straightforward solution for automotive professionals. Its components are crafted for precision, durability, and ease of use, making it an essential toolkit for maintaining vehicle brake systems.

Product code: MG99008

Brake caliper thread replacement inserts, M12x1.5mm, 10pcs

High-strength stainless steel brake caliper thread replacement inserts, sized M12x1.5mm. This 10-piece set is perfect for restoring damaged or worn threads in brake calipers, ensuring long-lasting, reliable repairs. Ideal for professional mechanics and automotive repair shops. Easy installation with standard tools.

Product code: MG99008A

Brake caliper socket set, H7, H8, H9, 3/8" square drive

A brake caliper socket set with H7, H8, and H9 hex sizes, 3/8" square drive, designed for the removal of brake calipers on Mercedes-Benz C-Class, Audi TT, A4, A6, A8, and more.

Product code: MG93283B

Headlight adjusting & brake spring hook

Made from heat-treated alloy steel, this tool is specially designed for removing and installing hard-to-reach headlight springs. This product can also be used to remove brake springs.

Product code: MG04B4041

Brake piston driver

Device for screwing the brake pistons.

Product code: CKB04078

Handheld vacuum tester and brake bleeding kit

Professional vacuum and pressure diagnostics tool used to test a variety of essential engine and associated functions including fuel, ignition, transmission and emissions.

Product code: G01156

Plastic vacuum pump set

It is perfect for performing such works as: bleeding brake systems and checking vacuum sensors, brake boosters, throttle valves, exhaust gas recirculation valves, pressure modulators in automatic transmissions, etc.

Product code: G01157

Drum brake pliers

Drum brake pliers. For removing and installing return springs on drum brakes.

Product code: JBM52625

Hand held brake pipe flaring tool

A manual brake pipe crimper is a tool used to seal brake lines by making SAE-type ends. The press allows the production of both single taper (OP1) and double taper (OP2) ends. Suitable for copper and copper-nickel joints. The press is designed for 3/16" or 4.75 mm diameter thin-walled steel pipes.

Product code: CKBB4128A

Tube double flaring set, 9pcs

Tube double flaring set, 9pcs for brake line tubings.

Product code: K00180

Tube flaring set 3-19mm

Tube flaring set for tubes with diameters: 3, 5, 6, 8, 10, 12, 15, 16, 18, 19mm.

Product code: G02720

180° tube bender 1/4" (6mm), 5/16" (8mm) and 3/8" (10mm)

Tube bender. Diameter range: 1/4" (6mm), 5/16" (8mm) and 3/8" (10mm). For aluminum, copper and steel tubes. 0-180° angles.

Product code: JBM52905

Tube bending tool. For diameters: 6-10mm

Designed for bending copper tubes, aluminium tubes and stainless steel tubes.

Product code: G02723

Brake Fluid Tester

Compact brake fluid tester with 4 LED indicators. Compatible with DOT3, DOT4, DOT5.1 fluids.

Product code: BGS-67241

Onboard brake disc lathe machine

Using an on-board brake disc lathe saves time and reduces risk of misalignment by allowing precise resurfacing of brake discs without needing to remove them from the car.

Product code: FDT4000

Flaring tool kit for brake lines

For making ends of brake lines or copper, copper-nickel and thin-walled steel pipes. Adapters: 4.75, 6.35, 7.95, 9.50, 11.10, 12.70, 15.87mm

Product code: CKB09065

Cutting blades for FDT4000, 1 pair

Durable cutting blades designed for the FDT4000 brake disc lathe machine. Comes as a pair, ensuring precise and efficient brake disc resurfacing.

Product code: KW10

Ratcheting brake caliper press

Effortlessly maintain your brake calipers with our ratcheting brake caliper press. Its 360° rotation and centrally located ratchet evenly spread force to prevent misalignment. Works on twin and quad piston fixed calipers, as well as single calipers. Comfortable ergonomic handle included.

Product code: MG04B4069

Brake fluid tester

Brake fluid tester is designed to analyze the amount of moisture content within the brake system.

Product code: MG04D7012

10pcs double pipe flaring tool set

The pipe flaring is particularly important for the installation of brake pipes used in the brake system, where precise and safe fitting is essential. It can also be a useful tool for air conditioner pipes.

Product code: MG04B4092A

Flaring tool kit for brake lines, 13pcs

Flaring brake line tool kit the primary tool for chip-free and parallel cutting as well as pipe flanging.

Product code: MG99066

The Universal Flaring Tool Kit Adjustable (5-16mm)

The Universal Flaring Tool Kit Adjustable (5-16mm) is designed to create conical or tapered flares on brass and aluminum pipes. It is adjustable and can accommodate a range of sizes from 5mm to 16mm (3/16" - 5/8").

Product code: MG04D1013

Mobile Electric Brake Bleeder

Electric brake bleeder with 2 pumps, 5L tanks, 7.5m hoses, and built-in storage. Compatible with all DOT fluids and LHM. 230V, mobile on wheels.

Product code: 03.036.35ECO

Universal tool for front brake caliper push back

Universal tool for front brake caliper push back. Drive: hex, 17mm. Wheel diameter: 49mm.

Product code: W0003

Puller hub bearing the brake disc Ford Transit

The puller hub bearing the brake disc is a special tool used for mounting and dismounting brake disc bearings on Ford Transit vehicles.

Product code: W0500

Brake rewind tool set, 35pcs

Brake rewind tool set, 35pcs, for almost every car type, like Citroen, Audi, Fiat, Ford, BMW, Mercedes-Benz, Toyota, Volvo, VW, Renault, Opel

Product code: MG50064

Wrench for rim unscrewing, ABS Renault Maskot, Master

Wrench for unscrewing the ABS rim/ring on Renault Mascott and Renault Master models with increased load capacity, designed for efficient and safe removal.

Product code: W0095

Brake fluid oil exchanger

Remove, and replace fluid from most types and models of vehicle brake systems. Also removes trapped air.

Product code: GS-432

Brake Piston Reset Tool Set, 35pcs

35-piece set for manually resetting brake pistons on most vehicles. Includes left and right threaded tools and adapter plates.

Product code: BGS-91115

Test bench for diagnostics of brake calipers

The MS300 test bench is designed for diagnosing and repairing brake calipers, including electromechanical parking brakes. It assesses performance, air-tightness, and enables effective repairs.

Product code: MS300

Universal Parking Brake Mechanism Tool for TRW Brake Calipers

Special tool for installation and removal of parking brake mechanisms in rear TRW brake calipers, suitable for all vehicle makes.

Product code: MS30001

Universal Parking Brake Mechanism Tool for ATE Brake Calipers

Special tool for installation and removal of parking brake mechanisms in rear ATE brake calipers, suitable for all vehicle makes.

Product code: MS30002

Universal Parking Brake Mechanism Tool for BOSCH Brake Calipers

Special tool for installation and removal of parking brake mechanisms in rear BOSCH brake calipers, suitable for all vehicle makes.

Product code: MS30004

Test bench for diagnostics of brake calipers

The MS301 test bench is designed for diagnostics of brake calipers of passenger cars and light commercial vehicles. The bench allows you to determine the tightness of the unit by creating hydraulic pressure in it.

Product code: MS301

Brake drum extractor / drive shaft push-out tool, 5-legs, universal

Universal 5-leg tool for extracting brake drums and pressing out drive shafts; fits up to 6-hole hubs, max Ø200mm.

Product code: BGS-7682

Brake fluid tester, 6-LED

Brake fluid tester with 6-LED display, for DOT3, DOT4, DOT5.1 fluids, AAA battery included.

Product code: BGS-67242

Air Brake Bleeder - Set, 11 pcs.

11-piece air brake bleeder set for brake and clutch systems, 1L capacity, 6.3mm quick coupler, 6–12 bar, 862g.

Product code: BGS-18087

Adapter Set for Air Brake Bleeder, for Tesla Models 3, Y, S, X, 2 pcs.

2-piece adapter set for air brake bleeders, for Tesla Models 3, Y, S, X (2012–2021), with 360° rotatable air connection.

Product code: BGS-66517

Brake Bleeding Adapter, Tesla Models 3 & Y

Brake bleeding adapter for Tesla Model 3 and Y (2017–2021), with 360° rotatable air connection and pressure-sealing fit.

Product code: BGS-66518

Brake Bleeding Adapter, Tesla Models S & X

Brake bleeding adapter for Tesla Model S and X (2012–2021), with 360° rotatable air connection and pressure-sealing fit.

Product code: BGS-66519

Air Brake Bleeder

Air brake bleeder with 5L reservoir, pressure regulator, diaphragm separation, and quick couplings, includes E20 adaptor.

Product code: BGS-8315

Adaptor Set for BGS 8315, for Audi, BMW, Ford, Honda, Nissan, Opel / Vauxhall, VW

Adapter set for BGS 8315 brake bleeder, fits Audi, BMW, Ford, Honda, Nissan, Opel, VW, includes fast couplings and various caps.

Product code: BGS-8316

Brake fluid tester

Brake fluid tester with 4-LED display, suitable for DOT3, DOT4, DOT5.1, powered by 9V battery.

Product code: BGS-63525

Brake Calliper Tool for Iveco Trucks, 7 pcs.

7-piece brake caliper tool set for resetting pistons on Iveco Stralis, Eurocargo, Daily, includes ratchet, discs, and bits.

Product code: BGS-1104

Brake Pressure Test Gauge Set

Brake pressure gauge set for direct hydraulic pressure testing on calipers, cylinders, or Teves ABS units; includes multiple adaptors and dual gauges.

Product code: BGS-1271

Hydraulic flaring tool set

Hydraulic flaring tool for brake, transmission, and A/C lines. Supports metric, 45° double, and push-connect flaring.

Product code: BGS-9445

Double Flaring Tool Kit with Pipe Cutter, 10pcs

10-piece flaring tool kit for creating single and double flares, includes pipe cutter and dies for 4.75–12mm pipes.

Product code: BGS-70221

Brake Maintenance and Assembly Tool Set, 15 pcs

15-piece universal brake tool set for drum and disc brake systems. Includes pliers, brushes, file, sockets, wrench, and driver.

Product code: BGS-1818

Air Brake Bleeding and Oil Extraction Unit – Pneumatic and Manual, 10L

10L pneumatic and manual oil extractor with brake bleeder, for non-corrosive fluids, with multi-diameter suction hoses and one-hand valve operation.

Product code: BGS-3155

Brake Fluid Tester, Boiling Point Measuring System

Professional brake fluid tester for boiling point measurement and water content analysis. Works with DOT 3, DOT 4, DOT 4 PLUS, and DOT 5.1.

Product code: BGS-6905

Vacuum Pump / Brake Bleeder Tool

Manual vacuum pump and brake bleeder for testing vacuum components and bleeding brake or clutch systems.

Product code: BGS-70205

Brake Fluid Bleeder

Brake fluid bleeder with 3 adapters for safe and efficient fluid change in brake and clutch systems.

Product code: BGS-70909

Onboard Brake Disc Lathe Machine

Onboard Brake Disc Lathe Machine is designed to provide a longer life of the discs by removing scratches, wear and curvatures that occur on discs over time.

Product code: FDT5000

Brake Disc Lathe Machine

Brake Disc Lathe Machine is suitable for discs of all cars and light commercial vehicles. The deformation that occurs on the surface of the disc over time can be removed by grinding with our machine. In this way, you can get a surface as if it were new. Lathe process can be done both automatically and manually. It is done by grinding both surfaces at the same time. All the tools required for the lathe process are available with the machine.

Product code: FDT6000

Brake Disc Lathe Machine (Two-Functions)

Brake Disc Lathe Machine (Two-Functions) is specialized model to offer dual functionality. It has the feature of grinding both on the vehicle and outside with additional apparatuses to the existing disc lathe machine.

Product code: FDT7000

Brake Fluid Exchanging and Airing Machine

Brake Fluid Exchanging and Airing Machine is a device that is easy for one person to use, facilitates and speeds up the replacement of brake fluid, eliminates dirt and moisture in the brake system, and ensures adequate air removal for effective braking. It has the right cover kit for every vehicle.

Product code: FHD1000

Drum Brake and Brake Disc Lathe Machine

Drum Brake and Brake Disc Lathe Machine is suitable for discs and drums of all cars and light commercial vehicles. The deformation that occurs on the surface of the drum over time can be removed by grinding with our machine. In this way, you can get a surface as if it were new. The turning process can be done automatically or manually. Thanks to the locking function of the disc lathe, the disc can also be turned if necessary.

Product code: KTM1000

Brake Calliper Socket and Bit Socket Set, 17pcs

17-piece socket and bit set for brake caliper disassembly. Includes hex, 10-point, 7-point, and pentagon sockets for models by Audi, BMW, Ford, Mercedes-Benz, Porsche, and more.

Product code: BGS-74283

Brake Caliper Socket Set, 11, pcs

11-piece socket set for brake caliper disassembly during brake pad replacement. Compatible with multiple car brands.

Product code: BGS-6697

Break piston removal tool

Essential tool for retracting the brake piston to allow insertion of new brake pads.

Product code: CKB04066

Brake piston presser. Max 70mm jaw spread.

Essential tool for pressing in the brake piston to allow insertion of new brake pads.

Product code: G02534

Brake fluid tester pen

Quick and easy method to accurately gauge the moisture content of all types of brake fluid.

Product code: G02731

Brake system bleeding set

Pneumatic brake system bleeding set.

Product code: G02732

Hand held vacuum pump

Accepts many kinds of adapters to fit most types of vehicles. The body has a switch to control two kinds of pressure conditions. Pressure ranges: positive pressure 0-60psi (1-4inhg) and negative pressure 0-30psi (0 to -1inhg).

Product code: CHS-A998A

Dial indicator - metric version

The dial indicator is an element of industrial automation. It is used to check the geometrical shape of a given element and the proper preparation of the element for work on a given machine. It is mostly used in metalworking and the automotive industry but we can use in construction, research and development where high precision measurements are required.

Product code: CKB03578

Professional dial gauge with magnetic base holder

Measuring the brake system is easier and more accurate than ever with the professional indicator watch magnetic base holder. The magnetic base ensures the fit, and the contact point detects even the smallest deviations. The dial pointer and the polished chrome control lever help with precise adjustment. The magnetic base can be easily removed with the on/off lever. Quickly check brake system play with this tool.

Product code: CKB03577

Tube flaring tool set with pipe cutter

Tube flaring tool set with pipe cutter. For tube sizes: 5, 6, 8, 10, 12, 14, 18mm.

Product code: G02722

Tube double flaring tool set, 10pcs

Tube double flaring tool set, 10pcs, tube sizes: 3/16", 1/4", 5/6", 3/8", 7/6", 1/2", 5/8"