Socket/Wrench For bearing nuts KMT 19 (6 teeth)

Lock nut socket wrench, KM2

Specialized tool that is designed to fit the specific dimensions of the KM2 lock nut, allowing for precise and efficient tightening or loosening.

Lock nut socket wrench, KM3

Outer diameter: 32mm, inner diameter: 25mm, teeth: 3.6mm, length 45mm.

Lock nut wrench for KM 15 locknuts, teeth from the inside

This is a professional quality tool specially designed and developed for easy and efficient tightening or loosening of KM15 size lock nuts. O.D.: 108mm. I.D.: 90.5mm. Teeth from the inside.

Lock nut socket wrench, KM 4, 28.3mm, 4 teeths

Socket wrench for bearing nuts, KM 4, 28.3mm, 4 teeths, hex drive.

Wrench for the front swingarm pivot pin caps on Citroen, Peugeot, Toyota

Socket wrench for the front swingarm pivot pin caps on Citroen (Jumpy, SpaceTourer), Peugeot (Expert, Traveller), Toyota (Proace) suspensions. 2016 and on.

Front hub nut wrench for Iveco Daily (2004-2019)

Front hub nut wrench for Iveco Daily (2004-2019).

Wrench for Iveco 35 front wheel hub nuts

This wrench is specifically designed to fit front wheel hub nuts with internal teeth and M50*1.5 thread dimensions.

Extra deep socket set 12pt, 15-19mm

A 5-piece extra deep socket set with 12-point design, covering sizes from 15mm to 19mm, ideal for accessing recessed fasteners and providing secure grip. 1/2" drive.

Extra deep socket set 12pt, 8-14mm

Extra deep socket set, 12pt, sizes 8-14mm. Includes 8mm, 10mm, 12mm, 13mm, 14mm for extended reach in tight spaces.

Front axle hub socket wrench for Suzuki Jimny, Vitara, Grand Vitara

Front axle hub socket wrench for Suzuki Jimny, Vitara, Grand Vitara. Diameter: 56mm, hexagonal drive.

Impact bit set, 9pcs

A 9-piece impact bit set designed for both manual and impact wrenches, featuring Spline (Ribe) bits from T20 to T70, compatible with 1/2" drives.

Stud extractor, 1/4"-3/4"

A stud driver (also known as a stud puller) is a tool that is commonly used in automotive repair when a stud is stuck or cracked in the vehicle's chassis or other structural component.

Lock nut wrench for KM16 locknuts

Lock nut wrench for KM16 locknuts. O.D.: 109mm. I.D.: 97.6mm.

Bearing nut socket wrench, KM5, 44.3mm

These wrenches are used to tighten the nuts that attach the axles to the wheels of the car. The keys ensure that the axles are properly attached to the wheels and allow maintenance work to be carried out.

Lock nut socket wrench, grooved, KM7

Lock nut socket wrench, grooved, KM7.

Socket wrench for lock nuts, KM14

Designed for safe and easy tightening and loosening of lock nuts.

MAN front axle cap, 6 teeth, 92.50mm

Designed specifically for MAN trucks, ensuring seamless integration and optimal performance. Meticulously crafted with a 6-teeth configuration, providing superior fit.

Lock nut socket wrench KM13 for bearing nuts

Lock nut socket wrench KM13, 6 teeth, thread: M65 x 2, internal teeth.

Wrench for KM13 bearing nuts

Wrench for KM13 bearing nuts with an outer diameter of 91mm and an inner diameter of 78mm, this wrench provides a secure and accurate grip on the specific size of KM13 bearing nuts.

Socket / Wrench For grooved bearing nuts KM 13 ; teeth from the inside

This socket wrench is tailored to fit grooved bearing nuts of KM 13 type. It has teeth on the inside to ensure a snug grip on the bearing nut, allowing for efficient loosening and tightening.

Socket / Wrench For lock nuts, KM 20

The Socket/Wrench is designed to fit lock nuts with KM20 specifications, ensuring a precise and snug fit. The outer diameter of 130mm and internal diameter of 121mm are tailored to match the dimensions of the lock nut for optimal functionality.

Key / nut for the bearing nut KM 8 , studs internal

This wrench is specifically designed to fit the KM 8 groove nut with teeth on the inside.

Wrench / Socket for KM 14 lock nut teeth from inside

It is tailored to match the dimensions of the lock nut for optimal functionality and engagement with the internal teeth. The Wrench/Socket for KM 14 lock nut is designed to engage with and manipulate the teeth or internal structure of the lock nut rather than the external surface. Using a specialized Wrench/Socket designed for inside engagement allows for precise tightening or loosening of the lock nut.

Lock nut socket wrench, KM17

Designed for safe and easy tightening and loosening of lock nuts.

The key to the lock nut KM 12, 6 teeth

A special tool that can be used to tighten or loosen lock nuts. It provides great help, thanks to its hardened design and high load capacity.

Socket wrench for KM1 lock nuts

Outer diameter: 26mm, inner diameter: 18.5mm, tooth: 2.3mm, length: 45mm. Helps to prevent damage to the nuts.

Key / nut for the bearing nut KM 12

This tool provides a secure fit and facilitates proper tightening or loosening of locknuts during bearing installation or removal processes. The key is made using hardened, high-quality materials, ensuring durability and strength, so it can withstand the forces that occur when working with bearings and lock nuts.

Swingarm pin wrench Renault Clio III , Renault Megane III RS

Swingarm pin wrench for Renault Clio III and Renault Megane III RS, designed for precise adjustment and securing of swingarm pins.

Key / nut for the bearing nut KM 6 , studs internal

Tempered key/nut for bearing nut KM6 with internal studs, 59mm outer diameter, 41.3mm inner diameter, and 4mm tooth width.

Spanner rocker pin cap Citroen C5 III , C6 / Peugeot 305 / 405/ 605 / 607 (hardened)

The tool is allows access and fixing to the rocker arm pins for Citroen C5 III, C6 / Peugeot 305 / 405 / 605 / 607 models.

Rear axle nut wrench for Renault, Nissan, VW, Opel, Mercedes

For loosening the groove nut on rear wheel hubs. OEM codes: T50017, CH50112, 906589000700, 8201079089

Wheel hub socket wrench Mercedes, inner diam.: 55mm

Wheel hub socket wrench Mercedes, inner diam.: 55mm.

Wheel hub nut wrench rear Toyota Land Cruiser ( 09509-25011 )

Rear wheel hub nut wrench for Toyota Land Cruiser, designed for secure and precise removal and installation. Compatible with OE Tools 09509-25011 and OE Nuts 42427-60021.

Wrench for the front wheel hub nuts of Iveco 35 vehicles

Special key for mounting and dismounting the front hub nut of Iveco 35 vehicles. Inner diameter: 62.5mm.

Wheel hub nut socket wrench for Renault

Wheel hub nut socket wrench for Renault Mascott, Midlum, Premium (nut OEM 5010372353).

Special socket set for A/C and ECU repair

For special safety screws. Suitable for A/C units for MAFs, for ECUs, for the injector air supply, for mass sensors.

Taillight nut wrench for Tesla

Tail light nut wrench for Tesla vehicles. Specifically designed for quick and easy removal and installation of taillight nuts in Tesla models.

Tesla battery cover screw socket, 5-teeth

This is a specialized 5-angle tooth wrench for removing and reinstalling Tesla battery compartment cover screws.

Groove nut socket set with external taps, KM4 - KM12, 9pcs

9-piece groove nut socket set, sizes KM4–KM12; chrome vanadium steel, 1/2" and 3/4" drive.

Wheel lock nut removal impact socket set, 9pcs

Easily remove locking wheel nuts with this 9-piece impact socket set. Durable and versatile, it fits 19-22mm sizes, perfect for common needs.

1/2" Special socket wrench set for passenger cars

A versatile 1/2" drive socket set, featuring 6-point, 3-point, 10-point, and pentagon sockets for a variety of automotive tasks, including Toyota idler gear fixings, Nissan and Renault clutches, Honda Civic control arms, and more.

Set of lambda probe oxygen sensor, vacuum switch remover

Professional set of lambda probe caps 7 pcs. 1/2", 3/8" x 22, 27, 29 mm. Suitable for removing and installing oxygen sensors, oil pressure switches, oil pressure sending units, thermal sensor switches, vacuum switches and break light switches.

Offset oxygen sensor socket. Diameter: 22mm, Drive: 3/8" square

Common 6 point, 7/8 in (22mm) socket, suitable for most oxygen sensors.

5pcs strut nut tool set for Audi, VW and Mercedes

A set of nut tools for tightening and loosening shock absorber mounts.

Lambda probe oxygen sensor socket set

Lambda (hot) end cap 22 mm x 50 mm, 1/2" square drive. Vacuum sensor and lambda probe (for low-seated probes) 22 mm x 30 mm, 3/8" square drive.

Universal socket adapter 11 to 32mm diameters

Universal socket adapter. For nuts and bolts with 11 to 32mm diameters.

Universal socket adapter 7 to 19mm diameters

The universal socket is designed to automatically adjust to fit any nut or bolt with 7 to 19mm (1/4" to 3/4") diameters.

Multifunctional socket wrench 48in1. Socket diameters: 8-19mm

It can replace wrenches intended for 12-point, 6-point, 4-point, E-Torx and spline screws and nuts.

Rim Lock Dismantling Tool Set, 10pcs

10-piece set for removing most rim locks without damaging the wheel. Made of high-strength steel.

Impact Socket Hexagon, Deep, 1/2" Drive, 19mm

Durable deep impact socket with 1/2" drive, 19mm hex profile, suitable for manual and impact wrenches.

Deep Impact Socket Hexagon 17mm | 12.5mm (1/2") Drive

Deep impact socket, 17mm hex, for manual or impact wrenches, 12.5mm (1/2") drive, chrome molybdenum steel, phosphated finish.

Universal socket wrench 7-19 mm ¼-3/4”

Its ability to adapt to various fastener sizes and shapes, combined with its compatibility with ratchets and power tools, makes it ideal for a wide range of applications.

Socket Set, Spline Profile (for RIBE) M6S–M12S, 3pcs

3-piece spline socket set (RIBE), M6S–M12S, 1/2" drive, black phosphated finish, for Nissan and Renault engines.

Hex Socket Adapter Kit

Hex socket wrench adapters for 1/4, 3/8, 1/2 sockets. It is made of 40Cr steel, the additional surface is oxidized. The perfect addition to any toolbox.

Wrench nut bolt Mercedes ML - W 163 ML ; W 164 ML

Wrench nut bolt specifically designed to fit and loosen/tighten the nut bolts used in various components of the vehicle. These nut bolts can be found in different areas of the ML, such as the suspension, engine, or other mechanical parts.

Service wrench for initial chamber 1/2", 60mm

Service wrench for initial chamber 1/2", 60mm

The key to loosening the nut of crankshaft bearings for motorcycles DKW SB other models

Rocker arm nut wrench for Citroen, Peugeot

Rocker arm nut wrench for Citroen XM, Xantia X1i, X2, C5 I / II , Peugeot 405 I / II ,406 ,605 ,607 cars.

Key 24 with mounting the socket

Key 24mm with socket attachment for versatile fastening and loosening tasks. Durable and precise tool for professional use.

Windscreen nozzle adjusting tool Opel Astra J, Insignia, Cascada, Zafira

Designed specifically for the unique washer jets fitted to vauxhall/opel vehicles. Ideal for adjusting stuck windscreen nozzles. With four gripping claws and angled profile.

Wrench for wheel bearing nut, rear axle, Mercedes Sprinter, VW LT

A tool designed for the removal and installation of rear axle wheel bearing nuts.

Key/Socket for KM Bearing Nut, 16 Internal Teeth

Socket for KM 16 bearing nut, 16 inner teeth, 117.5mm outer Ø, 98mm inner Ø, 87mm total length.

Wrench / Cap for KM 5 grooved nut from the inside

The tool is allows for reliable and powerful tightening or loosening and ensures that the nut is properly fixed.

Wrench / socket for slotted nut KM 7 teeth from the inside

Tempered wrench/socket for slotted nut with KM 7 teeth on the inside, 66mm outer diameter, 48.3mm inner diameter.

Socket for loosening the crankshaft nut crankshaft and camshaft attacker SCANIA M44x1.5 mm

Crafted with precision and durability in mind, this socket is engineered to provide a secure grip on the crankshaft nut and camshaft attacker of SCANIA engines with M44x1.5 mm specifications. With its perfect fit and robust construction, it ensures efficient and reliable loosening.

Socket wrench for KM10 lock nuts, 78.5mm

Socket wrench for KM10 lock nuts, 78.5mm, hexagonal drive

Key / nut for the bearing nut KM 4 , studs internal

Tempered key/nut for bearing nut KM4 with internal studs, 43mm outer diameter, 28.3mm inner diameter.

Key / nut for the bearing nut KM 11

This tool is provide a secure fit and facilitate the proper tightening or loosening of the locknut during bearing installation or removal processes. The key/nut is manufactured using hardened, high-grade materials to ensure durability and strength, making it capable of withstanding the forces involved in working with bearings and locknuts.

Key / nut for the bearing nut KM 11 , studs internal

This tool is provide a secure fit and facilitate the proper tightening or loosening of the locknut during bearing installation or removal processes. The key/nut is manufactured using hardened, high-grade materials to ensure durability and strength, making it capable of withstanding the forces involved in working with bearings and locknuts.

Nut cap for Goldhofer THP/SL4 trailer; 6 teeth, teeth inside

The Nut Cap with 6 internal teeth and a tooth distance of 107 mm is a specialized component used in Goldhofer THP/SL4 semi-trailers to secure and maintain critical parts of the trailer's assembly.

Bearing nut socket wrench, KM 12, internal pins

Bearing nut socket wrench with internal pins. For KM12 M60 x 2 nuts.

Lock nut socket wrench, KM15

A hardened socket wrench with 4 gripping claws for KM15 bearing retaining locknuts KM15. Inner diameter: 90mm. Hex drive.

The key to the lock nut KM9

The socket wrench is designed for safe and easy tightening and loosening of bearing nuts.

Key / nut for the bearing nut KM 9 , studs internal

This wrench is specifically designed to fit the KM 9 groove nut with teeth on the inside.

Key/nut for the bearing nut KM 10, internal stud bolt

This tool is provide a secure fit and facilitate the proper tightening or loosening of the locknut during bearing installation or removal processes. The key/nut is manufactured using hardened, high-grade materials to ensure durability and strength, making it capable of withstanding the forces involved in working with bearings and locknuts.

Socket 6 Teeth, 107mm for Low Floor Trailers

This is an essential tool for professionals working on low floor trailers. Featuring a robust 6-teeth configuration, it ensures accurate engagement and superior grip.

Key / cap to the pin arm KIA CEED, Hyundai i30 (4 teeth)

Key / cap to the pin arm allows access and fixing of rocker arm pins and fits Kia Ceed and Hyundai i30 models.

Socket / Wrench For lock nuts, KM 18

The socket wrench is designed for safe and easy tightening and loosening of lock nuts.

Cap / key of the bearing grooves 8 hp; 58mm

This cap/key is designed for bearings with 8 grooves and a diameter of 58mm. It is constructed using high-grade materials, ensuring durability and reliability during use. The purpose of the Bearing Groove Cap/Key is to provide a secure fit over the bearing, allowing for easy installation, removal, or adjustment.

Adapter to remove the pins down on the Renault Master 2006

Adapter to remove the pins down on the Renault Master 2006

Wrench for BMW & Mercedes Steering Gear Side Nut

This is a dedicated wrench, purposefully designed for the assembly, disassembly, and adjustment of the side nut in BMW and Mercedes steering gears.

The wrench for the side pressing nut of the Mercedes steering rack

This tool is ideal for professionals and DIY enthusiasts alike, this tool ensures seamless installation, removal, and adjustment of the steering gear side pressure nut.

Steering Knuckle Nut Wrench for Mercedes Actros, Axor, Antos, Arocs

This wrench is designed for unscrewing the steering knuckle nut of specific Mercedes trucks. It offers a precise fit and is compatible with both OEM and certain aftermarket parts.

Rocker Arm Nut Wrench for Iveco Daily 2006 E4

This tool is specifically tailored to unscrew the nut of the rocker arm.

Shaft puller for manual gearbox, Fiat Ducato 2.8 JTD

Shaft puller for manual gearbox, Fiat Ducato 2.8 JTD

Key to loosening the rear hub nuts M55X1,5 Mercedes Sprinter, VW Crafter after 2006 (hardened)

Key to loosening the rear hub nuts is designed to fit the specific dimensions of the hub nut and provide the necessary grip and torque for loosening it.

Socket wrench for M52x1.5 Mercedes Vario rear hub nuts

Our Socket Wrench for M52x1.5 Mercedes Vario rear hub nuts is the perfect tool for unscrewing wheel hub nuts on the rear axle of your Mercedes Vario (1996-2013). With an OE code of 6743560126, this wrench offers precise and efficient performance. Get yours today!

KM10 socket wrench for unscrewing the wheel hub nut of the Mercedes G class

The socket wrench is specifically designed for the precise and safe removal and installation of the wheel hub nuts of Mercedes G class cars. With its dimensions and design, the socket wrench ensures an optimal fit with the wheel hub nuts, allowing them to be handled quickly, easily and without damage.

Mercedes Smart Hub Pressing Adapter Set

Hub pressing adapter set for Mercedes Smart vehicles, designed for precise and efficient hub installation and removal.

Wrench / Cap for loosening the wheel hub nut IVECO DAILY 55s17 4x4 REAR (oe nuts 42558514)

Wrench/Cap for loosening the rear wheel hub nut on IVECO Daily 55s17 4x4, compatible with OE nut 42558514.

Wrench for initial chamber nut, Mercedes, Fiat

The Wrench for initial chamber nut is specially designed for Mercedes and Fiat vehicles, ensuring professional and reliable use. The key's screw is 150mm long and has an M24x2 thread size, ensuring a perfect fit and a strong fixing. The tool is made of high quality material that guarantees long life and resistance to frequent use.

Socket for removing rear axle nut in Mercedes Vario

Socket for removing rear axle nut in Mercedes Vario.

Groove nut socket external tooth KM10

Socket for KM10 grooved nuts, 20mm (3/4") drive, 4 studs, DIN 981 compliant, chrome vanadium steel.

Groove nut socket external tooth KM7

Socket for KM7 grooved nuts, 12.5mm (1/2") drive, 4 studs, DIN 981 compliant, chrome vanadium steel.

Groove nut socket external tooth KM11

Socket for KM11 grooved nuts, 20mm (3/4") drive, 4 studs, DIN 981 compliant, chrome vanadium steel.

Groove nut socket external tooth KM12

Socket for KM12 grooved nuts, 20mm (3/4") drive, 4 studs, DIN 981 compliant, chrome vanadium steel.

Groove nut socket external tooth KM4

Socket for KM4 grooved nuts, 12.5mm (1/2") drive, 4 studs, DIN 981 compliant, chrome vanadium steel.

Groove nut socket external tooth KM9

Socket for KM9 grooved nuts, 20mm (3/4") drive, 4 studs, DIN 981 compliant, chrome vanadium steel.

Groove nut socket external tooth KM5

Socket for KM5 grooved nuts, 12.5mm (1/2") drive, 4 studs, DIN 981 compliant, chrome vanadium steel.

Groove nut socket external tooth KM8

Socket for KM8 grooved nuts, 12.5mm (1/2") drive, 4 studs, DIN 981 compliant, chrome vanadium steel.

Groove nut socket external tooth KM6

Socket for KM6 grooved nuts, 12.5mm (1/2") drive, 4 studs, DIN 981 compliant, chrome vanadium steel.

Oxygen Sensor Socket Set, 7 pcs.

7-piece oxygen sensor socket set for sensors, switches, and diesel nozzles, multiple drives and profiles, 2202g.

Oxygen Sensor Socket Set, 14 pcs.

14-piece oxygen sensor socket set, multiple sizes and drives for a wide range of vehicle brands, 4080g.

Steering Rack Side Nut Wrench for Lexus and Toyota models

Specialized nut socket for easy installation, removal, and adjustment of steering rack side tightening nuts, ensuring damage-free and precise repairs. Compatible with select Toyota models. Manufactured by MSG Equipment.

Steering Rack Side Nut Wrench for Dodge, Mercedes-Benz, VW

This specialized nut socket is designed for efficient mounting, dismounting, and adjustment of steering rack side tightening nuts. Manufactured by MSG Equipment, it ensures safe and damage-free handling during steering system maintenance and repair.

Wrench for bottom nut of worm gear steering rack for numerous models

This specialized nut socket is designed for the precise installation and removal of the bottom nut of the steering rack worm gear. It ensures safe, damage-free handling and high-quality repairs for steering rack pinions. It is suitable for the following models: Chrysler, Citroën, Ford, Hyundai, Kia, Mazda, Mitsubishi, Peugeot, Seat, Volkswagen (VW).

Steering Rack Side Nut Wrench for Citroen and Peugeot models

Specialized nut socket for easy installation, removal, and adjustment of steering rack side tightening nuts, ensuring damage-free and precise repairs. Compatible with select Citroen and Peugeot models. Manufactured by MSG Equipment.

Impact Socket Hexagon, Deep, 12.5mm (1/2") Drive, 10mm

Deep hexagon impact socket, 1/2" drive, 10 mm size, for manual and impact tools, chrome molybdenum steel.

Impact Socket Hexagon, deep 12.5mm (1/2") Drive, 13mm

13mm deep impact socket with hexagon profile, 1/2" drive, for manual and impact use, phosphated chrome molybdenum steel.

Steering Rack Bearing Bushing Nut Socket for Hyundai Tucson, KIA Sportage

Specialized nut socket for installing and removing the bearing bushing of the steering rack. Designed for hydraulic steering rack repairs, ensuring precise disassembly and assembly of the support sleeve.

Steering rack bearing bushing crown socket for Great Wall Hover and Opel Frontera

Specialized nut socket for installing and removing the bearing bushing of the steering rack. Designed for hydraulic steering rack repairs, ensuring precise disassembly and assembly while preserving the part’s integrity.

Steering Rack Bearing Bushing Nut Socket for Chevrolet Aveo

Specialized nut socket for the installation and removal of the steering rack bearing bushing. Designed for hydraulic steering rack repairs, ensuring safe disassembly and reassembly of the support sleeve.

Steering rack bushing tool for Seat and VW models

This specialized wrench is an essential tool for hydraulic steering rack repairs. It simplifies the disassembly and assembly of the support sleeve, ensuring the part remains intact and undamaged for future use.

Steering rack side nut socket for BMW, Nissan, Renault models

Specialized tool for precise removal, installation, and adjustment of the side preload nut in electric power steering racks, ensuring part integrity and durability.

Steering rack nut socket for Citroen, Fiat, Peugeot models

Specialized socket for steering rack nut removal and installation in Citroën, Fiat, and Peugeot models, ensuring precise and damage-free handling.

Steering rack side nut socket for BMW, Ford, Iveco, Mercedes, Polestar, Volvo

Precision tool for removing, installing, and adjusting the side preload nut in electric power steering racks, ensuring part integrity for future use.

Steering Rack Steady Bush Wrench for Chevrolet Camaro, 32mm

Specialized 32mm wrench for mounting and dismounting the steering rack support sleeve in hydraulic steering systems while preserving part integrity.

Nut Socket for Steering Rack Reducer Nut for VW group models

Nut socket for dismantling and assembling the steering rack reducer nut in electric steering racks, compatible with multiple VW Group vehicles.

Nut Socket for Steering Rack Reducer Nut

Nut socket for disassembling and assembling the reducer nut in electric steering racks, compatible with VW Group, Mercedes, Opel, Land Rover, and more vehicles.

3-pt socket set, M5-M12(8-16.5mm), 5pcs

5-piece 3-point socket set (M5–M12) with 1/2" drive, satin chrome finish, for VAG TDI injectors and Bosch components.

T-Star Plus Socket Set (Torx Plus), 12.5mm (1/2") Drive, 8pcs

8-piece T-Star Plus socket set (18EP–32EP), 1/2" drive, chrome vanadium steel, on socket rail.

Special Sockets for BMW Rim Locks, 3pcs

3-piece set of chrome molybdenum steel special sockets for BMW rim locks with different tooth and size specifications.

Specialized nut socket for installation/removal of bearing bushing of steering rack

A specialized nut socket designed for the precise installation and removal of support bushings in hydraulic steering racks, ensuring component integrity during maintenance.

Specialized nut socket for installation/removal of bearing bushing of steering rack

A specialized nut socket designed for the installation and removal of the bearing bushing in hydraulic steering racks. Ensures safe disassembly and reassembly, preserving the part for future use. Compatible with CHERY TIGGO 2005 and newer models.

Groove Nut Socket Set, External Tooth, KM4–KM12, 9pcs

9-piece external tooth socket set for KM4–KM12 grooved nuts, for DIN 981 standard applications on shafts and sleeves.

Groove Nut Socket Set, Internal Square Drive, KM4–KM12, 9pcs

9-piece socket set for DIN 981 grooved nuts, suitable for KM4–KM12 sizes, with 1/2" and 3/4" internal square drives.

Special Car Sockets, 3-/5-/6-/10-point, 10 pcs.

10-piece special car socket set, 3-/5-/6-/10-point designs, chrome molybdenum steel, length 38 mm, for various automotive applications.

Brake Caliper Socket Set, 11, pcs

11-piece socket set for brake caliper disassembly during brake pad replacement. Compatible with multiple car brands.

Socket Wrench for Aluspotter 6100

Precision socket wrench for adjusting electrodes and components of the Aluspotter 6100, essential for maintenance and optimal performance.