Set of brushes for cleaning injector sockets and glowplugs

CDi Injector Extractor Set

Cdi Injector Extractor Set a versatile tool kit designed to simplify the process of dismantling and removing injectors.

Product code: DK-230583

Copper washer assortment, 110pcs

110pcs copper washer assortment, M6, M8, M10, M12, M14, M16

Product code: JBM53353

Injector copper ring assortment 375 pcs

375pcs injector copper ring assortment. For sealing of e.g. injectors on Common-Rail Diesel injection systems (CDI). Material: T2 copper

Product code: JBM53340

Injector copper ring assortment 150 pcs

150pcs injector copper ring assortment. For sealing of e.g. injectors on Common-Rail Diesel injection systems (CDI). Material: T2 copper

Product code: JBM53229

Copper washer set, 580pcs (metric)

Copper washer set, 580pcs (metric)

Product code: G02916

Metric copper washer set, 300pcs

Metric copper washer set, 300pcs. Copper washers are corrosion resistant in wet environments, nonmagnetic, and electrically conductive.

Product code: G02811

Metric copper washer set, 150pcs

Metric copper washer set, 150pcs

Product code: G02807

Diesel fuel pump timing set

The device is designed for the precise setting or checking the start of injection in rotary injection pumps like Bosch, Lukas, CAV.

Product code: G02652

Diesel injector puller set with Common Rail adaptors

Efficiently remove stuck and seized diesel injectors with ease using our Diesel Injector Extractor Set with Common Rail adaptors. Featuring robust construction, this specialized sliding hammer allows for rapid withdrawal, even for the most severely seized injectors. Includes various adapters and sizes for all injection nozzle cars.

Product code: MG50633

Mercedes CDI injector puller, with slide hammer

For removal of stuck injectors without dismantling the cylinder head. Mercedes 611, 612, 613

Product code: MG50154

Injector seat milling and cleaning kit

The kit is suitable for renovating a diesel injector housing, cleaning an injector housing and bore, as well as a glow plug bore using milling cutters.

Product code: MG04A3065D

Inertial puller for car injectors, Mercedes CDI, VW 1.9TDI and 2.5TDI

It helps apply a strong and controlled force to pull the injectors out of their seating.

Product code: W0018

Adapter + screw of injector puller, Mercedes CDI, VW TDI; Bosch

The tool allows the safe and efficient removal of injectors from the respective engines.

Product code: W0029

Adapter for injector pulling, Mercedes CDI (hardened)

The adapter for pulling the injector is a special tool used in Mercedes CDI diesel engines. This adapter is made of hardened material to withstand the high pressure and load generated when removing the injectors.

Product code: W0053

Inertial puller for car injectors, HDI

Injector puller with slide hammer, HDI, 19 mm is a high quality and professional tool designed for the maintenance and repair of gasoline direct injection systems. This sliding hammer is specially designed for the efficient removal of injectors of HDI type engines.

Product code: W0062

Inertial puller for car injectors, CDI and others, with 3 axles

Injector puller with sliding hammer, for CDI and other engines, with 3 shafts (200mm, 240mm, 280mm)

Product code: W0063

Slide hammer for injector pulling, weight 2.5kg, M12/M16

Slide hammer for injector pulling, weight 2.5kg, M12/M16.

Product code: W0067

Set for dismantling of injectors, Bosch and others

Set for dismantling of injectors, Bosch and others

Product code: W0091

Injector puller adapter, VW TDI PD

Adapter for injector pulling, VW TDI PD.

Product code: W0094

Adapter for injector pulling (internal thread 17x1)

Adapter for injector pulling (internal thread 17x1). It is designed to help pull out injectors that are especially difficult to pull out.

Product code: W0135

KIT to pull the injector, 10mm hex wrench, thread adapter (W0104, W0135)

Kit for removing the particularly difficult-to-extract injector.

Product code: W0137

Injector pulling adapter, Fiat Ducato 2.3 JTD, 15.5mm

Injector pulling adapter, Fiat Ducato 2.3 JTD. Diameter: 15.5mm

Product code: W0184

Injector puller DTI Opel - Diesel common rail

This injector puller can be used to remove common rail diesel engine injectors from Opel vehicles.

Product code: W0221

Injector puller adapter, Opel Vivaro 2.0 CDTI - hardened

The injector puller adapter is a special tool used on Opel Vivaro 2.0 CDTI diesel engines to safely and efficiently remove or insert injectors.

Product code: W0225

Adapter for injector valve pulling Opel DTI - diesel

Adapter for injector valve pulling Opel DTI - diesel

Product code: W0226

Injector puller set 1.5 DCI Delphi (14x1.5) Renault, Nissan

Injector puller set 1.5 DCI Delphi (14x1.5) Renault, Nissan

Product code: W0247

Adapter for injector pulling, 1.5 DCI Delphi (14x1.5) Renault, Nissan

The injector puller adapter is specifically designed for Renault and Nissan 1.5 DCI Delphi (14x1.5) engines to provide a professional and precise tool for injector removal.

Product code: W0248

Adapter for Opel, Fiat, Alfa Romeo 1.9 JTD injector pulling

Adapter for Opel, Fiat, Alfa Romeo 1.9 JTD injector pulling.

Product code: W0281

Injector puller for Fiat Ducato, Iveco Daily, Iveco Turbo Daily 2.3, 2.8, 3.0

Injector puller for Fiat Ducato, Iveco Daily, Iveco Turbo Daily 2.3, 2.8, 3.0 (from 1999 onwards).

Product code: W0310

Puller Injectors for Citroen, Peugeot 1.6 HDI engines

This tool is specifically designed for the safe and efficient removal of injectors in Citroen and Peugeot 1.6 HDI engines.

Product code: W0314

Injectors puller for Renault, Opel, Nissan, Suzuki 1.9 DCI / CDTI engines

Tool for dismantling and pulling out Renault, Nissan, Opel, Suzuki 1.9 DCI / CDTI injectors.

Product code: W0315

Adapter for pulling Denso injectors for Toyota 2.2 170hp engines

Adapter for pulling Denso injectors for Toyota Avensis, Auris, Corolla, Rav 4 2.2 170hp engines. OEM: 23670-0R090.

Product code: W0320

Adapter / Puller Injector Opel Renault 2.0 DCI / CDTI and others (hardened)

Product code: W0380

Adapter to pull the injectors HDI Siemens M25 x 1 (hardened)

The precision-engineered threads of this adapter ensure a perfect fit, ensuring a secure connection with the injector.

Product code: W0393

Injector puller HDI Siemens M25 x 1 (hardened)

This injector puller is specially designed for HDI Siemens injectors with M25 x 1 thread.

Product code: W0394

Injector puller adapter HDI 2.0, 1.3 CDTI

Injector puller adapter HDI 2.0, 1.3 CDTI

Product code: W0409

Hydraulic cylinder to the pullers, press and injectors - 15 Ton

With a 15-ton pressing force, this hydraulic cylinder delivers exceptional power to handle tasks. Whether you need to remove stubborn parts, press components together or work with injectors, this cylinder provides the necessary force to get the job done efficiently.

Product code: W0432

Adapter / puller injector BMW 1.8 / 2.0 N47

The Adapter/Puller Injector for BMW 1.8/2.0 N47 engines is a specialized tool designed for efficient removal and installation of injectors in BMW vehicles equipped with the N47 engine.

Product code: W0443

Inertial puller for car injectors, Audi, VW / TD, TDI, with 2 axles

Inertial puller for car injectors, Audi, VW / TD, TDI, with 2 axles (125mm, 250mm)

Product code: W0064

Puller adapter for Denso M25x0.5 Toyota and Mazda injectors

Puller adapter for Denso M25x0.5 Toyota and Mazda injectors

Product code: W0534

Injector puller for removing Denso injectors M25x0,5 on Toyota and Mazda

The Injector Puller designed specifically for removing Denso injectors with an M25x0.5 thread on Toyota and Mazda vehicles is a versatile and reliable tool engineered to simplify the injector removal process.

Product code: W0535

Injector puller Fiat Opel 1.9 JTD ; CDTI

The injector puller is a specialized tool used for removing injectors from the cylinder head of diesel engines. It is specifically designed for use with Fiat, Opel, and Lancia vehicles equipped with 1.9 JTD/CDTI diesel engines.

Product code: W0551

Injector puller for Fiat, Citroen, Iveco 3.0 HPI

Specialized puller for removing injectors from the engine block.

Product code: W0558

Puller Injectors 2.0 2.2 HDI Bosch

The Puller for Injectors on 2.0 and 2.2 HDI engines with Bosch injectors is a specialized tool used for removing the injectors from the cylinder head. This puller is designed to securely fasten to two specific points: behind the valve seat and the injector body.

Product code: W0583

Delphi piezoelectric injector puller for Mercedes, Kia, Hyundai

The purpose of the device is to safely and effectively remove piezoelectric injectors from the vehicle engine. The tool allows piezoelectric injectors to be removed particularly easily and without damage, allowing access to service work and ensuring correct operation.

Product code: W0589

Adapter set for pulling Bosch injector valves M17x1

Pullers for removing Bosch injectors from the engine. To be used with injector pullers or sliding hammers.

Product code: W0596

Injector puller with Bosch M17x1 system, with screw

Injector puller with system Bosch M17x1 is a specialized tool designed for removing injectors from vehicles equipped with the Bosch injection system. It is particularly suitable for cars with this specific injection system and features hardened components for enhanced durability. The injector is removed by mounting the adapter in place of the coil and the injector valve.

Product code: W0599

Diesel injector seat cutter for VW, Seat, Skoda 2.0 TDI, M16x1.5

Thread: M16 x 1.5, right. Diesel injector seat milling cutter for VW, Seat, Skoda 2.0 TDI. Cutter diameter: 38mm.

Product code: W0629

Diesel injector seat cutter for VW, Seat, Skoda 2.0 TDI, M16x1.5

Thread: M16 x 1.5, left. Diesel injector seat milling cutter for VW, Seat, Skoda 2.0 TDI. Cutter diameter: 38mm.

Product code: W0631

Set for removing injectors Delphi 2.0 HDI (12mm) (Delphi 28388960)

The purpose of the kit is to safely and efficiently remove the injectors from the given type of engine. Delphi 2.0 HDI (12mm) injectors require special handling and tools, and the tools in the kit allow professional work with these parts.

Product code: W0661

Adapter for removing the injector in Ford Transit 2.0 Ecoblue

For removing injectors used in Ford Transit and Tourneo 2.0 TDCi with VDO, Ford Panther injection system.

Product code: W0708

Injector puller Renault, Opel, Nissan 2.0 DCI and CDTI engines with chain

Injector puller for Renault Traffic , Laguna, Scenic, Vel Satis, Escape, Opel Vivaro, Insignia 2.0 DCI and CDTI with chain

Product code: W0316

Injection pump gear puller Hyundai, KIA 2.5 CRDI

This injection pump gear puller is engineered specifically for removing the sprocket of the high-pressure pump, ensuring smooth and damage-free operations.

Product code: W0730

Fuel injector puller and installer tool set for BMW, Mercedes Benz

Designed to facilitate the removal and installation of fuel injectors in BMW and Mercedes Benz vehicles. Made with the highest quality materials to ensure the effective removal and installation of fuel injectors without causing damage.

Product code: JBM54220

Pneumatic injector and bearing puller set, 35pcs

Pneumatic injector puller set with air hammer, 35pcs is a specialized tool set designed for removing injectors from automotive engines using pneumatic power.

Product code: MG99091

Pneumatic injector puller set, 24pcs

Pneumatic injector puller set, 24pcs is a specialized tool set designed for removing injectors from automotive engines using pneumatic power. 20-30Nm, 5-8bar, 50L/min (1.76 CFM)

Product code: MG98784

BMW Common Rail injector puller set

Allows to remove the injector without disassembling the cylinder head. For BMW M47TU, M57, M57TU engines.

Product code: MG50630

Adapter for loosening stuck M14x1 injectors

Hardened adapter for loosening stuck M14x1 injectors. Designed for durability and precision.

Product code: W0536

Universal injector extractor set

Universal extractor set for pulling out engine injectors. Includes adaptors for Bosch, Delphi, Denso and Siemens injectors.

Product code: C04/0027

Adapter for Mercedes CDI injectors

13mm claw puller for Mercedes CDI injectors.

Product code: C04/0102

Injector puller set, Bosch, Delphi, Denso, Toyota, Siemens, 10t

Injector puller set to be used with hydraulic hand pumps (not included). For M17 Bosch, M14 Delphi, M16 Toyota Adaptor, M20 Denso, M25 x 1.0 / M27 Siemens.

Product code: JBM54245

Inertial puller for car injectors + attachment, CDI and others

Inertial puller for car injectors, including CDI injectors, equipped with attachments for efficient and powerful removal of stubborn injectors.

Product code: W0088

Injector removal set for Mercedes A Class CDI

Injector removal set for Mercedes A-Class CDI, designed for both unscrewing and knocking out stubborn injectors.

Product code: W0206

Injector puller Fiat Opel Suzuki 1.3 JTD , CDTI , DDIS

Injector Puller for Fiat, Opel, Suzuki, and Lancia 1.3 JTD, CDTI, DDIS engines. Ideal for safe and efficient injector removal.

Product code: W0494

Adapter for loosening stuck M12x1 injectors

Hardened adapter for loosening stuck M12x1 injectors. Ensures safe and efficient removal of seized injectors.

Product code: W0531

Injector removing tool set VAG FSI

Injector removing tool set VAG FSI

Product code: MG50363

Injector puller tool set, with slide hammer

Injector puller tool set, with slide hammer. For Delphi, Bosch, Denso, Siemens injectors

Product code: MG50348

Injector gasket puller

For the extraction of copper sealing gaskets and washers within injector seats.

Product code: MG04A3079

Diesel injector seat milling kit, 17 pcs

Diesel Injector nest milling kit is used for recutting injector valve seats when rebuilding diesel engines or replacing injectors.

Product code: MG04A3046

Inertial puller for car injectors, CDI

Inertial puller for car injectors, CDI

Product code: W0061

12V Injector tester

The 12V injector tester is a device used to test and diagnose the performance of fuel injectors that operate on a 12V electrical system. An essential tool in engine diagnostics and maintenance, it allows mechanics and technicians to quickly identify injector problems and keep engines running smoothly for gasoline vehicles.

Product code: MG04A3028

Diesel injector cutter set, 10pcs

Diesel injector cutter set is for re-cutting injector seats when reconditioning diesel engines or replacing the injectors.

Product code: MG04A3015

High pressure pump sprocket remover for Hyundai and KIA

High pressure pump sprocket remover and flywheel lock for Hyundai and KIA. For chain driven 1.1, 1.4, 1.5, 1.6, 1.7 CRD diesel engines.

Product code: MG04A2331

Injector puller Opel Vivaro 2.0 CDTI

Injector puller for Opel Vivaro 2.0 CDTI, designed for safely and efficiently removing diesel injectors.

Product code: W0220

Inertial injector puller set BMW 1.8, 2.0 N47

Inertial extractor for BMW E87, E90, E91, E92, E93 1.8d and 2.0d N47 injectors. The range of application can be expanded with more adapters.

Product code: W0439

Injector removal adapter for Renault 2.3 DCI, after 2012, 20mm

Injector removal adapter for Renault 2.3 DCI, after 2012, 20mm.

Product code: W0467

Face mill for VW, Seat, Skoda 1.9, 2.0, 2.4, 2.5, 3.3 V5, V6, V8 TDI, 5 guide pins

Face mill for VW, Seat, Skoda 1.9, 2.0, 2.4, 2.5, 3.3, V5, V6, V8, TDI injector seats. Includes 5 guide pins.

Product code: W0630

Injector puller adapter, 2.0 HDI, 12mm

Puller adapter for 2.0 BlueHDi, HDI, TDCi Delphi, DS, Ford, Citroen, Peugeot injectors, 12mm.

Product code: W0663

Injection pump pulley puller for Honda Civic, CR-V, HR-V 1.6i-Dtec

This tool is a special puller used to remove the injector pump belt pulley from the 1.6i-Dtec diesel engines in the Honda Civic, CR-V and HR-V models. The use of this tool makes it easier to service or replace the pump without damaging surrounding components.

Product code: W0742

Copper washer removal tool for diesel injector

Easily remove and install copper washers on diesel injectors with our copper washer removal tool. Measuring 230mm long with a 7mm inner hole, it's designed for deep seated injectors.

Product code: MG50629

Pneumatic injector puller set, 21pcs

Pneumatic injector puller set, 21pcs is a specialized tool set designed for removing injectors from automotive engines using pneumatic power. The set includes a pneumatic puller, a black BMC (Blow Molded Case) for storage, and color stickers for organization and identification.

Product code: MG98782

Pneumatic injector puller set, 21pcs

Pneumatic injector puller set, 21pcs is a specialized tool set designed for removing injectors from automotive engines using pneumatic power. The set includes a pneumatic puller, a black BMC (Blow Molded Case) for storage, and color stickers for organization and identification.

Product code: MG98782A

Injector knockout kit Opel Renault 2.0 DCI / CDTI and others (hardened)

The injector knockout kit is designed for the efficient removal of injectors from Opel and Renault 2.0 DCI / CDTI engines, as well as other compatible models.

Product code: W0389

Injector puller 2.0 HDI

The injector puller for the 2.0 HDI engine with a 12 mm lug spacing is a specialized tool designed for removing fuel injectors.

Product code: W0411

Injector puller Chrysler Voyager 2.5 ; 2.8 CRD

Injector puller for Chrysler Voyager 2.5 and 2.8 CRD engines, compatible with VM 2.5 CRD and 2.8 CRD engines from 2001. Suitable for Chrysler Voyager, Grand Voyager, and Jeep Cherokee.

Product code: W0538

Fiat injector puller Citroen, Iveco 2.2 TDCI, HDI, JTD

Injector puller for 2.2 TDCI, HDI, and JTD engines in Citroen, Peugeot, Fiat, Ford, and Iveco vehicles. Ideal for Citroen Jumper, Peugeot Boxer, Fiat Ducato, Ford Transit, and Iveco models.

Product code: W0556

Injector puller for Citroen Jumper, Peugeot Boxer, Fiat 2.3 JTD HPI

Injector puller for 2.3 HPI, JTD, and HDI engines in Citroen, Peugeot, Fiat, and Iveco vehicles. Compatible with Citroen Jumper, Peugeot Boxer, Fiat Ducato Power, and Iveco Daily models.

Product code: W0560

Denso injector adapter puller M20x1 (hardened)

Hardened Denso injector adapter puller with M20x1 external thread and 17x1 internal thread, designed for efficient and damage-free injector removal.

Product code: W0639

Injector puller set with slide hammer, 25pcs

A versatile hand injector puller set designed for the safe and efficient removal of fuel injectors.

Product code: MG98786

Wire brush set, 38pcs

This 38-piece wire brush set includes stainless steel, brass, and nylon brushes, compatible with the included soft grip handle or power tools for versatile cleaning and machining tasks.

Product code: MG91085

Universal injector seat cleaning set

Universal injector seat cleaning set. Nylon brushes: 15mm, 20mm. Steel wire brushes: 18mm, 22mm, 25mm.

Product code: MG04A3064

Injector and glow plug seat cleaning set

For cleaning of the injectors and glow plug seats. Includes: 4 cleaning brushes, brush holder, 3 Injector seat cutters, cutter guide, seal puller etc.

Product code: MG04A3045

Fuel injector seat and shaft cleaning set

Universal for most diesel engines. The brushes are specially engineered to fit injector seats. Used to remove rust, carbon and other debris from seats and cups without damage.

Product code: MG91089B

Universal injector extractor set with hydraulic cylinder

Universal extractor set for pulling out engine injectors. Includes adapters for Bosch, Delphi, Denso and Siemens injectors.

Product code: C04/0027S

Injector puller for Fiat Ducato, Iveco Turbo Daily 2.3, 2.8, 3.0

Injector puller for Fiat Ducato, Iveco Daily, Iveco Turbo Daily 2.3, 2.8 and 3.0 (1999-).

Product code: C04/0037

Injector puller for VW 2.0 TDI engines

Injector puller for VW 2.0 TDI engines.

Product code: C04/0093

Injector puller with sliding hammer for Mercedes CDI injectors

Injector puller with sliding hammer for Mercedes CDI injectors 611, 612, 613

Product code: C04/0095

Injector puller with sliding hammer for Mercedes CDI injectors

Injector puller with sliding hammer for Mercedes CDI injectors in OM611, 612 and 613 engines.

Product code: C04/0095WF

Adapter for extracting VW TDI PD injectors

Adapter for extracting VW TDI PD injectors

Product code: C04/0097

Universal fuel injector test set 41pcs

The gauges are designed to measure fuel pressure in both low and high pressure systems. The kit includes two gauges, adapters and hoses.

Product code: CHS-A0125

Fuel injector pressure tester kit

Fuel injector pressure tester for petrol engines.

Product code: CHS-A1011

Injector testing tool with adapters ( Capacity: 600bar)

The injector tester is used to regulate and check the pressure, the leaks and the quality of the spraying of the injector, to ensure excellent power and economical operation of the engine.

Product code: CKB08039

Injector removal set for Ford EcoBlue 2.0 diesel

Injector removal set for Ford Edge, Focus, Galaxy, Kuga, Mondeo, Ranger, S-Max, Tourneo Custom, Transit, Transit Custom EcoBlue 2.0 diesel. OEM: 303-1706.

Product code: C04/0244

Copper washer assortment set, 150pcs

Copper washers are used in the automotive industry and power transmission hydraulics, providing a reliable seal for all threaded connections. This versatile and high-quality set includes various sizes of copper washers, so you'll always have the right size washer for every job.

Product code: CKB03796

Pneumatic Injector Puller

A pneumatic injector puller is a tool used to easily and efficiently remove injectors from diesel vehicles. The tool uses pneumatic power to safely pull the injectors out of the engine, allowing for easy replacement or repair.

Product code: JBM54186

Set of 3 Adaptors For Pneumatic Injector Puller (REF.JBM54186)

These adapters are an addition to our pneumatic injector puller product (JBM54186) line to provide additional versatility and compatibility with different types of injectors, allowing for a wider range of applications.

Product code: JBM16295

Injector nozzle extractor set

The Injector Nozzle Extractor Set is a specialized toolkit designed for the precise task of removing injector nozzles from specific diesel engines. This set is particularly tailored for use with PSA 2.0 HDI engines found in Peugeot and Citroën vehicles, as well as PSA 2.0 JTD engines utilized in Fiat and Lancia models.

Product code: MG50638

Injection nozzle socket set

25, 27, 28, 29, 30mm Siemens, Bosch, for Peugeot and Citroen 2.0 HDI engines

Product code: MG50604

Common Rail injection pump pressure tester

For Bosch, Denso, Delphi and Siemens Common Rail injection pump pressure testing

Product code: MG50507

Injector nozzle extractor set for Mercedes-Benz, Chrysler

Mercedes C-Class, E-Class, Sprinter (611, 612, 613) Chrysler Grand Cherokee 27crd (00'-)

Product code: MG50357

Injector nozzle extractor set

This injector seat removal tool kit is the perfect tool for common rail systems, specifically designed for MERCEDES-BENZ CDI engines.

Product code: MG50350

VAG injector puller set, SDI, TDI (PD)

Suitable for 1.4 SDI, TDI, 1.9D, SDI, TDI (PD), 2.0TDI (PD), 2.5 TDI, 2.5 TDI (PD), 2.8TDI (PD), 2.7 TDI, 3.0 TDI

Product code: MG50347

Injector seat cutter tool set, 5 reamers

This injector seat cutter kit is specifically designed for automotive technicians, offering a perfect tool for precise machining of injector seats. With 5 different sizes and types of cutter heads, this kit ensures universal applicability for maintenance and repair of injector seats across various car brands and models.

Product code: MG50337

Master injector extractor kit with hydraulic cylinder

Universal kit complete with hydraulic cylinder for removing seized fuel injectors. Suitable for the extraction of various diesel fuel injectors.

Product code: MG04A3117

Professional diesel injector seat cleaning kit

Universal for most diesel engines. The brushes are specially engineered to fit injector seats. Used to remove rust, carbon and other debris from seats and cups without damage.

Product code: MG01Z9480

Injector copper ring assortment, 551pcs

551pcs injector copper ring assortment for vehicles Mercedes, Renault, Iveco, Ford, BMW, MAN, Mazda, Land Rover, Deutz, Fiat, KIA and Universal washers

Product code: JBM53464

Common rail flow meter set with adapters for 6 cylinder engines

The crevice Common rail flow meter set with adapters is designed to measure the fuel flow of diesel vehicles in the injector return branch.

Product code: MG50183

Injection pump remover and installer tool kit for Ford 2.0D EcoBlue TDCi engines

A set of tools for removing the injection pump in Ford 2.0D EcoBlue TDCi engines. With this tool, no adjustment required for the pump after reassembly.

Product code: C01/0197

Locking pin for VAG injection pump

Locking pin for VW, Audi, Skoda, Seat, Ford injection pumps.

Product code: C01/0031

Hex key for Bosch injector valve

H10 hex wrench with a 7.5mm hole for disassembly of Bosch injector valves.

Product code: C04/0087

Diesel fuel injection pump timing set

Tool for setting diesel injection pump's timing. For Bosch, Lukas, CAV. For cars: Fiat, Lancia, Alfa Romeo, VW, Audi, BMW, Ford, Renault, Rover, Iveco, Mitsubishi, Isuzu and others.

Product code: CKB01610

Puller injection pump sprocket Renault 1.9 D / TD / Volvo / Opel

This is a special tool used to remove the injection pump sprocket on Renault 1.9 D and TD engines and Volvo and Opel vehicles. This tool allows the injection pump sprocket to be safely and efficiently removed from the engine for maintenance or service.

Product code: W0274

Injection pump locking pin for Mercedes cars with Lucas pump

Injection pump locking pin for Mercedes cars with Lucas pump. OEM: OM602, OM604, OM605, 601 589 052100.

Product code: W0392

Adapter for testing fuel injection Diesel trucks

Fuel injection adapter with measuring tips for diesel compression pressure testers, compatible with MAN 0826 and 0824 engines.

Product code: W0144

Pump sprocket remover for Hyundai and Kia 1.1, 1.4, 1.5, 1.6, 1.7 CRDI

Pump sprocket remover for Hyundai and Kia 1.1, 1.4, 1.5, 1.6, 1.7 CRDI diesel engines (from 2004). OEM: 09331-2A010, 09331-2A000.

Product code: W0476

Injector valve wrench, HDI, DCI, CDI etc., hex 10mm

Siemens injector valve wrench, HDI, DCI, CDI etc., hex 10mm.

Product code: W0104

Injector nut removal key for 3.0 HPI

Injector nut removal key for 3.0 HPI engines, designed for safe and efficient unscrewing and tightening of injector nuts. Durable and precise fit for professional use.

Product code: W0384

Injection pump removal tool for BMW N47, N47S Common Rail engines

Pinion extractor for diesel injection pumps in BMW N47, N47S and N57 1.8d, 2.0d, 2.5d, 3.0d engines manufactured in 2007 - 2015. This extractor is compatible with new generation BMW engines that have the distribution in the back (at the flywheel).

Product code: W0423

Universal wheel puller injection pump Ford 1.8 TDCI

For installing and removing the injection pump in Ford 1.8 TDCI engines.

Product code: W0450

Wrench for injection pumps, hexagon 15mm

It designed for the precise needs of injection pump maintenance and repair.

Product code: W0111

Injection pump removal tool for Renault, Opel, Nissan 2.2, 2.5 DTI, CDTi

A tool to remove the diesel pump sprocket to allow the removal of the fuel pump without disturbing the timing belt on Renault 2.5 and 2.2 diesel engines found in Renault, Opel and Nissan vans.

Product code: W0602

Injection pump wrench for VW, Audi TDI engines

Injection pump wrench for VW, Audi TDI engines.

Product code: W0040

Bushing injection pump BMW Common-Rail 2.0d N47 / N47S (06-10)

When disassembling or assembling the pump, it preserves the position of the gear wheel.

Product code: W0282

Wrench for unscrewing the nut of the injector unit body Vw, Audi 2.0 - Siemens (30mm)

This tool is intended to help mechanics and technicians safely and effectively remove the nut that secures the injector unit body in place.

Product code: W0709

Injection pump gear remover tool for BMW 2.0, 3.0

For installing and removing the injection pump in BMW diesel engines.

Product code: W0122

Denso injector valve wrench

3-pin key for removing and installing the return valve on Denso Common Rail diesel injectors.

Product code: W0391

Injection pump lock for Mercedes Benz diesel engines

Injection pump lock for Mercedes Benz diesel engines. OE: 601, 602, 603, 605, 606, 617.

Product code: W0367

Injection pump wrench set for Bosch, Lucas etc., 6 pcs special keys

Injection pump wrench set with 6 specialized keys for Bosch, Lucas, and other common diesel injection pumps. Provides precise tools for pump removal and adjustment.

Product code: W0235

Wrench for the injection pump of diesel Mercedes Benz engines

Key for MRSF-ERE injection pumps found in Benz diesel engines.

Product code: W0324

Adapter for testing fuel injection Diesel trucks

Adapter for testing diesel fuel injection on trucks with DB OM 352 and 422 engines.

Product code: W0143

Timing belt and injection pump gear puller, 4 feets

Timing belt and injection pump gear puller, 4 feets and adjustable spacing 60 - 110mm.

Product code: W0151

Wrench for injection pumps, hexagonal 13mm

Wrench for injection pumps, hex 13mm, drive diam. 12mm, 9x7mm rectangular fixing, hardened

Product code: W0234

Two-pieces wrench for truck injectors - Mercedes, Man (Euro-2)

Two-pieces wrench for truck injectors - Mercedes, Man (Euro-2). Edzett, 4 fogú, két részes (32mm, 22mm), belső hüvely átmérő 22mm. M14 menetes

Product code: W0074

Injection pump lock Rover, Land Rover, Jaguar 3.0

Injection pump lock for Jaguar, Land Rover, and Rover 3.0 TDV6 engines. Fits Jaguar XF, XJ, Land Rover Discovery 4, Range Rover, and Range Rover Sport models (2009-2014).

Product code: W0465

Injection pump puller VW, Seat, Skoda 1.6, 2.0 TDI CR

Remove your VW, Seat, or Skoda's high-pressure pump hub with ease using our Injection Pump Puller. Designed for 1.6L and 2.0L TDI CR diesel engines. OEM code: T40064.

Product code: W0586

Wrench for truck injector valves, MAN, Mercedes, Scania and others

Wrench for truck injector valves, MAN, Mercedes, Scania and others.

Product code: W0016

Injection pump gear puller for Peugeot, Citroen Toyota 1.6 HDI

Special puller for removing the high-pressure fuel pump sprocket on DV6 1.6 HDI, 1.6 BlueHDI, 1.6 D engines.

Product code: W0697

Injector valve removal socket, HDI,DCI,CDI etc., hex 10mm

Injector valve removal socket, HDI, DCI, CDI etc. Drive: hexagonal, 10mm. Hole diameter: 7.3mm

Product code: W0213

Injection pump gear removal BMW, Opel, Land Rover

Injection pump gear removal BMW, Opel, Land Rover

Product code: W0229

Wrench for injection pumps, hexagon 24mm, universal

Wrench for injection pumps, hexagon 24mm, universal.

Product code: W0109

Injection pump puller 1.4, 1.6, 2.0 TDI CR

Removes the high pressure diesel pump on VAG Group 1.4, 1.6 and 2.0 TDI CR engines. OEM: T10489.

Product code: W0656

Injection pump gear puller for KIA, Hyundai 2.0, 2.2 CRDI

This tool allows the fuel pump sprocket to be pulled from the pump. Essential for sprocket removal.

Product code: W0541

Wrench for truck injectors, MAN, Mercedes (Euro-2), 120mm

Wrench for truck injectors, MAN, Mercedes (Euro-2), 120mm

Product code: W0076

Wrench for truck injectors, MAN, Mercedes (Euro-2), 72mm

Wrench for truck injectors, MAN, Mercedes (Euro-2). Length: 72mm, diameter 22mm, square drive: 1/2"

Product code: W0075

Wrench for injection pumps, hexagon 17mm

Wrench for injection pumps, hexagon 17mm, guidance diam. 16mm, triangular fixing

Product code: W0110

Injection pump lock for Renault , Volvo , Opel 1.9 D/TD (brass)

This injection pump lock tool is made from high-quality brass, ensuring resilience against wear while providing an exact fit during pump securing processes.

Product code: W0319

Injection pump puller for Hyundai and KIA 1.6 CRDi engines

Injection pump puller for Hyundai and KIA 1.6 CRDi engines.

Product code: W0683

Siemens injector valve socket wrench

Siemens injector valve socket wrench.

Product code: W0657

Set of wrenches for Bosch, Lucas injection pumps, 5 pcs

Set of wrenches for injection pumps, 5 pcs of special wrenches

Product code: W0108

Adapter for testing fuel injection Diesel trucks

Adapter for testing fuel injection in diesel trucks with MAN 2866, 2566, and DB OM 401, 421, 441 engines. Designed to ensure accurate diagnostics of fuel injection systems.

Product code: W0145

Injector key for Volkswagen, 24mm

Volkswagen injector key, 24mm, designed for precise removal and installation of unit injectors in VW cars.

Product code: W0365

Injection pump puller for Chrysler Voyager 2.5 TD

Injection pump puller for Chrysler Voyager 2.5 TD

Product code: W0455

Fuel solenoid wrench, Ford Ford 1.8i, 2.0, 2.2, 2.4 TDCi, TDDDi

Injection pump wrench, Ford Ford 1.8i, 2.0, 2.2, 2.4 TDCi, TDDDi. 1/2" square drive.

Product code: W0706

Wrench for unscrewing the injector nut for Volkswagen, Audi 2.0 TDI - Siemens (17mm)

This tool is specifically designed to remove the injector nut on these diesel engines.

Product code: W0710

Wrench for injection pumps, hexagon 14mm

Wrench for injection pumps, hexagon 14mm, guidance diam. 9mm, triangular fixing

Product code: W0112

Wheel bolt for injection pump locking Volkswagen, Audi, Seat, Skoda

This wheel bolt secures your injection pump sprocket. Compatible with Volkswagen, Audi, Seat, and Skoda models. Keep your engine running smoothly.

Product code: W0176

Wrench for truck injectors, MAN, Mercedes (Euro-2), "L" profile, 120mm

Hardened injector wrench for trucks, compatible with MAN and Mercedes Euro-2 engines. L-profile, 120mm length, featuring 3 teeth and a 1/2" pivot. Min 45 HRC for durability.

Product code: W0077

Injection pump belt pulley tool for Jeep Grand Cherokee 3.1 TD

Injection pump belt pulley tool for Jeep Grand Cherokee 3.1 TD.

Product code: W0456

Set of wrenches for dismantling of initial combustion chamber, diesel

Set of wrenches for dismantling of initial combustion chamber. Diesel Mercedes, Fiat, M22x1, M22x1.5

Product code: W0069

Injection pump setting tool set for Ford 2.0/2.4 16V

The tool set is specially designed for adjusting the injection pumps of Ford Transit and Mondeo 2.0, 2.4 liter diesel engines. This kit is guaranteed to fit the mentioned engines, so you can easily maintain and adjust the injection pumps.

Product code: W0044