Name: Pole terminal and wiper arm puller, 2-arm BGS-70001
Brand: BGS
SKU: BGS-70001
Availability: PreOrder

2-jaw and 3-jaw gear puller set

2 or 3 jaws that can be adjusted to fit various sizes of gears, pulleys, bearings, and other components.

Product code: MG04J1125

Bearing puller 24-55mm

2-jaw bearing puller with adjustable screw design, suitable for removing bearings and pulleys with a capacity range of 24-55mm. Ideal for automotive, motorcycle, and electric tool applications.

Product code: MG93363

Bearing puller set, 14pcs

Designed for pulling bearing off shaft and separating bearing housings.

Product code: DK-230589

It’s ideal for removing small gears, wheels, and fittings from shafts also can be used to replace the steering pump, perfect for wiper arm assembly, rebuilding your alternator, removing tightly fitted pulleys, and reaches places that regular gear pullers can’t access.

Product code: DK-230590

Hydraulic bearing puller kit, 10T

Suitable for pulling hubs, flanges, gears and bearings.

Product code: DK-230584

Ribbed crankshaft/auxiliary pulley removal tool, 45-165mm

This tool is specifically designed for the removal of stubborn or seized ribbed crankshaft and auxiliary pulleys

Product code: MG91547

Timing belt and injection pump pulley puller

This puller is a go-to tool for removing timing belt and injection pump pulleys from a wide range of engines, including those found in the VW Audi group and other compatible vehicles.

Product code: W0033

Wiper arm removal tool

Wiper arm removal tool, cast housing with flat ball-end thrust bolt for the fast & safe removal of taper mounted windscreen wiper arms.

Product code: MG04J1233

Universal wiper arm puller

Universal wiper arm puller. Two paws type.

Product code: W0123

Bearing and seal drive-in set, 10 pcs

Bearing and seal drive-in set, 10 pcs. specially used for installing bearing rings and seals.

Product code: MG04J1040

Hardened M12 nut with bearing for pullers

Product code: W0149

Internal bearing puller set, 12-32mm

This internal bearing puller set with slide hammer is perfect for pulling pilot bearings and other internal clamping jobs. Gripping sizes range from 11-32mm.

Product code: MG50140

3-Jaw Internal & External Puller Set

Can be used for pulling automotive parts, wheel bearings, gears and more. Comfortable T handle provides secure grip while working.

Product code: MG04J1011

Universal puller set

Introducing the Universal Puller Set, a must-have tool for professional mechanics who demand versatility and precision in their work. This set is engineered to cater to a wide range of pulling tasks, ensuring smooth operation in both automotive and machinery repairs.

Product code: MG50131

Front wheel drive kit, 55.5-91mm, axle 380mm

Front wheel drive kit with a range of 55.5-91mm and 380mm axle. Includes universal front hub and bearing installer/puller with M12x1.5mm and M14x1.5mm adapters.

Product code: MG50405

Hydraulic wheel hub puller 10T

Powerful hydraulic wheel hub puller for 4- or 5-bolt hubs. Compatible with various car brands, handles 10T hydraulic force, and fits bolt patterns within 11mm-148mm diameter.

Product code: MG04B1044B

Wheel bearing removal/installation tool set 50-88mm

Diminishes the possibility of wheel bearing damage during removal and installation. Sizes (d) 50, 55, 60, 64, 67, 70, 72, 74, 75, 78, 82, 84, 88mm.

Product code: MG50075

Upper control arm central bolt puller for VW, Audi after 2005

Upper control arm central bolt puller for VW, Audi after 2005.

Product code: W0164

Windshield wiper arm/battery terminal puller, capacity 25-43mm

This dual-purpose puller easily removes stuck and jammed battery terminals and wiper arms. It is also suitable for removing battery lugs and generator bearings.

Product code: MG50151

Stud extractor set, 4pcs

This four-piece stud extractor set is a highly efficient tool designed for the quick and easy removal and installation of hard-to-reach studs.

Product code: MG93264

Stud extractor, 1/4"-3/4"

A stud driver (also known as a stud puller) is a tool that is commonly used in automotive repair when a stud is stuck or cracked in the vehicle's chassis or other structural component.

Product code: MG50047

Crankshaft pulley puller VW / Audi 4 and 5 cylinder

Engineered specifically for the removal of crankshaft pulleys in certain VW and Audi vehicles. Ensures smooth and damage-free extraction of crankshaft pulleys, a vital component in the engine's belt system.

Product code: W0173

Pulley puller three-armed 40-85mm with elongated arms

The three-arm pulley puller is a versatile tool designed to remove pulleys from a variety of mechanical systems. Especially useful for discs with diameters between 40 mm and 85 mm. Arms are 20mm longer than W0601, making them 40mm long for this tool.

Product code: W0605

Puller for belt pulleys, four-arm, 60mm

The four-arm 60mm pulley puller is a special tool used to remove pulleys. This tool is specifically designed for attaching and removing four-arm pulleys.

Product code: W0089

Puller for belt pulleys, three-arm

A puller for removing gears. Central screw diameter: 16mm. Adjustable clamping diameter: 42-82mm. Arm length: 35mm. Full length: 55mm.

Product code: W0068

Puller to the wiper arms - universal 50x40

Puller to the wiper arms - universal 50x40 designed to provide efficient and reliable removal of wiper arms from a wide range of vehicles, including newer car models. This puller has been developed based on the design by Machanikow and has undergone extensive testing on various new cars, ensuring its effectiveness and performance.

Product code: W0119

Slide hammer, weight 1kg, M12/M16

The use of this slide hammer allows you to create powerful impacts to loosen or remove jammed or stuck parts.

Product code: W0065

Slide hammer, weight 1.5kg, M12/M16

The use of this slide hammer allows you to create powerful impacts to loosen or remove jammed or stuck parts.

Product code: W0066

Internal bearing puller ⌀35mm

Internal bearing puller is a special tool designed to remove gear bearings with an inner diameter of 35 mm.

Product code: W0291

Universal AC clutch remover

Universal disc with a centering mandrel for the removal of car air conditioning clutches.

Product code: W0013

Rocker pin puller and press for T4, Master, Movano, Interstar, Sprinter, VW LT

Press for upper bolts T4, Master, Movano, Interstar and lower bolts Sprinter, VW LT

Product code: W0093

Press, puller for bolts of suspension arm, front Master/Movano/Interstar

This tool has a combined press and puller function, which allows convenient and efficient handling of the suspension arm pins. With the press function, the tool is able to press or unpress the pins from the rocker arms, ensuring accurate and stable pin insertion or removal.

Product code: W0097

Adapters for press, puller for bolts, Master, Movano, Interstar

Adapters for press, puller for bolts, Renault Master, Opel Movano, Nissan Interstar

Product code: W0102

Press and puller for ball joints Renault, Opel, Iveco, VW, Nissan, Mercedes etc., 20 adapters

Universal press and puller for ball joints Renault, Opel, Iveco, VW, Nissan, Mercedes etc., with 20 adapters. For models manufactured in 2006 and on.

Product code: W0162

Adapters for press, puller for bolts VW T4, LT, Mercedes Sprinter

The adapters allow the removal and installation of bolts in VW T4, LT and Mercedes Sprinter vehicles.

Product code: W0147

Press for silents and ball joints, for VW T4, Mercedes Sprinter, VW LT

Press for mounting and removing silents in the suspension arm in VW T4, VW LT and Mercedes Sprinter 1999-2006 without having to remove the arm from the vehicle.

Product code: W0027

Ball bearing puller set, 23pcs

23-piece bearing puller set for removing internal bearing races; fits ISO sizes 6004–6405 from FAG, SKF, INA, NTN.

Product code: MG93354

Three-jaw pilot bearing puller

Designed for removing sleeve-type bearings and bushings (12–38mm inner ring). Made of forged, heat-treated, corrosion-resistant steel with a stable, anti-slip three-jaw design.

Product code: MG96029

Crankshaft pulley puller tool set for BMW, Mini

This tool is specially designed for use on BMW and Mini vehicles, particularly focusing on Mini W10 and W11 chain drive petrol engines. It is an essential tool for the safe and effective removal of the crankshaft pulley without causing damage.

Product code: MG96497

Pulley puller, universal

Using the tool, the timing wheel can be removed from the shaft quickly and without damage. Its design allows it to be used in many types of cars. Solid metal design. The puller fits well in the wheel, with 8 grooves, the legs can be fixed in several positions.

Product code: MG04A2240

Adjustable timing pulley puller

An adjustable timing pulley puller is a special tool used in the assembly process of engines.

Product code: MG04A2213

Bearing race and seal driver set, 16pcs

This versatile 16-piece set is designed to install straight races and seals into brake disc hubs effortlessly and without causing damage to the bearing or axle housing.

Product code: MG99022A

Bearing, bushing remover/installer set, 17pcs

Effortlessly remove and install bearings, seals, and bushings with our 17-piece puller/installer set. Adapter sizes range from 10-42mm, making it versatile for various jobs. Perfect for DIYers and professionals alike.

Product code: MG50147

7pcs Drive Shaft Puller / Extractor Set

The 7pcs Drive Shaft Puller / Extractor Set is suitable for pulling the half-axle into the wheel hub. In order to be able to carefully and evenly insert the half-axle into the wheel hub, it is necessary to use the appropriate adapters and accessories from the drive-in tool, so that the half-axle goes in securely and straight.

Product code: MG50046

Bearing separator set

Bearing separator set, capacity 30-50mm, 50-75mm, 2 separators, 1 forcing screw, 4X2 extensions

Product code: JBM51125

Bar type gear and bearing pullers with two jaws. Working range: 250mm

Two jaw gear puller with adjustable clamping depth and width. For both internal and external bearings.

Product code: G02203

Two jaw gear and bearing puller. Operating range: up to 100mm

Two jaw gear and bearing puller with adjustable clamping depth and width.

Product code: G02200

Two jaw gear and bearing puller. Operating range: up to 150mm

Two jaw gear puller with adjustable clamping depth and width.

Product code: G02201

Bearing and gear puller with 3 jaws. Working range: up to 8" (203mm)

Bearing and gear puller with 3 jaws. Working range: up to 8" (203mm). The puller enables the removal of bearings (internal and external) from various types of shafts and houses.

Product code: G02233

Hydraulic jaw puller kit 5t

Multi-function puller with adjustable two or three leg function. Allows bearings, gears, etc. to be easily removed with minimal effort by use of the hydraulic puller.

Product code: G00910

Bearing and gear puller with 3 jaws. Working range: up to 10" (254mm)

Bearing and gear puller with 3 jaws. Working range: up to 10" (254mm). The puller enables the removal of bearings (internal and external) from various types of shafts and houses.

Product code: G02245

Two jaw gear and bearing puller. Operating range: up to 200mm

Two jaw gear and bearing puller with adjustable clamping depth and width. For both internal and external bearings.

Product code: G02202

Bearing and gear puller with 3 jaws. Working range: up to 6" (152mm)

Bearing and gear puller with 3 jaws. Working range: up to 6" (152mm). The puller enables the removal of bearings (internal and external) from various types of shafts and houses.

Product code: G02232

Bearing and gear puller with 3 jaws. Working range: up to 6" (152mm)

Bearing and gear puller with 3 jaws. Working range: up to 6" (152mm). The puller enables the removal of bearings (internal and external) from various types of shafts and houses.

Product code: G02243

Pilot bearing puller. For bearing with inner diameters: 12-38mm

Suitable for removing tight fitted sleeve type bearings and bushings with inner ring diameters of 12 to 38mm.

Product code: G30300

Bearing and gear puller with 3 jaws. Working range: 12" (305mm)

Bearing and gear puller with 3 jaws. Working range: 12" (305mm). The puller enables the removal of bearings (internal and external) from various types of shafts and houses.

Product code: G02246

Bearing and gear puller with 3 jaws. Working range: up to 10" (254mm)

Bearing and gear puller with 3 jaws. Working range: up to 10" (254mm). The puller enables the removal of bearings (internal and external) from various types of shafts and houses.

Product code: G02234

Pilot bearing puller. For bearing with inner diameters: 12-38mm

Suitable for removing tight fitted sleeve type bearings and bushings with inner ring diameters of 12 to 38mm.

Product code: G30301

Bearing and gear puller with 3 jaws. Working range: up to 4" (102mm)

Bearing and gear puller with 3 jaws. Working range: up to 4" (102mm). The puller enables the removal of bearings (internal and external) from various types of shafts and houses.

Product code: G02231

Gear and bearing puller with 3 jaws. Max capacity: 14" (350mm)

Gear puller with 3 jaws 14" (350mm). The puller enables the removal of bearings (internal and external) from various types of shafts and houses.

Product code: G02247

Hydraulic jaw puller set 10t

Multi-function puller with adjustable two or three leg function. Allows bearings, gears, etc. to be easily removed with minimal effort by use of the hydraulic puller.

Product code: G00911

Windshield wiper puller

Windshield wiper puller, max. diameter 45mm, min. diameter 17mm, simple handling, safe mechanism, design with thin legs and brass-finished ends. Weight 0.2kg.

Product code: JBM52454

Wiper arm puller

Wiper arm puller. The puller is used to remove car wiper arms. Made of durable chrome-molybdenum steel.

Product code: G02770

Bearing race and seal driver set. 17 pcs

This set makes it easy to insert bearing races and seals without damage to the bearing race, seals and housing. Fits most standard seals and bearing sizes.

Product code: CKB04013

Stud Wrench 8" 12-21mm

Fully adjustable with a one-handed squeeze. Efficient ratcheting by releasing, then re-gripping the object. Often removes nuts and bolts damaged by other tools.

Product code: G00860

Hydraulic drive shaft puller, 98–125mm, 12t

Hydraulic 12-ton puller for seized drive shafts; fits 4- and 5-hole hubs (Ø98–125mm), for M14 bolts, large vehicles.

Product code: BGS-7774

Loosening Tool for Wheel Nut Covers

Removes wheel nut covers without rim damage. Ideal for aluminum rims. Spring steel claws. T-handle design.

Product code: BGS-8257

External/internal 3-arm puller, 15–100mm

3-arm external/internal puller 15–100mm, reversible, forged GRP polyamide, galvanized, hex drive 14mm, clamping depth 75mm.

Product code: BGS-7723

External/internal puller 2-arm, max.75mm

2-arm external/internal puller, max. clamping width 70mm, depth 37mm, forged chrome vanadium steel.

Product code: BGS-9408

Belt pulley puller, 40–168mm

Belt pulley puller 40–168mm for generators, air conditioners, water pumps, includes 10mm hex wrench.

Product code: BGS-7779

Rim Lock Dismantling Tool Set, 10pcs

10-piece set for removing most rim locks without damaging the wheel. Made of high-strength steel.

Product code: BGS-8656

Parallel puller, 2-arm, 35–80mm

2-arm parallel puller 35–80mm clamping width, for bearings, gears, rotors; drop-forged chrome vanadium steel, hex drive 17mm.

Product code: BGS-74523

Wheel bearing removal/installation tool set 55.7-88.4mm

Diminishes the possibility of wheel bearing damage during removal and installation. Sizes (d) 55.7, 63.3, 67.8, 70.7, 71.9, 71.7, 72.8, 73.4, 74.7, 77.4, 81.4, 83.3, 88.4mm.

Product code: JBM52551

Crankshaft Pulley/Damper Removal Tool Jaguar, Land Rover

A set of tools for the removal of the front crankshaft pulley (crankshaft vibration damper) fitted to the Jaguar, Land Rover 3.0L V6 and 5.0L V8 petrol engines.

Product code: CKB10435

Bearing separator set

Bearing separator set, capacity 30-50mm, 50-75mm, 2 separators, 1 forcing screw, 4X2 extensions

Product code: MG50132

Bearing puller 10-30mm

The clamp can be adjusted with screws 10-30mm. It is suitable to extend existing inventory. With the scraper you can accurately remove the bearing without damaging it.

Product code: MG04J1171

Mounting pad set for bearings, 52pcs

Mounting pad set for bearings, 52pcs is suitable for installing bearings or seals without damaging the bearing, seal or housing.

Product code: MG04B1035

Internal bearing puller tool set, 8-58mm

This internal bearing puller tool set can handle jobs requiring clamping, with a capacity of 8-58mm. Includes 3 threaded adapters and 11 gripping sizes. Easy and efficient!

Product code: MG50148

Wheel bearing removal/installing tool set

For the VAG group, wheel hub size 72mm, Audi A2, Skoda Fabia after 2000, VW Polo, Fox after 2005, Seat Ibiza after 2002.

Product code: MG50432

Wheel Bearing tool VW

Bearing installation and removal tool for 85mm bearings. Application Volkswagen Touareg, Transporter, Multivan & T5

Product code: MG50432A

Rear bearing hub puller, Citroen; Peugeot ; Toyota ; Opel after 2016

This tool is designed for the removal and installation of wheel bearings, especially on specific vehicles models after 2016. The design eliminates the need to remove the steering knuckle and ABS sensor and simplifies the repair process.

Product code: W0736

Pulley puller three-armed 40-85mm

The Three-Armed Pulley Puller is a versatile tool designed for removing pulleys from various mechanical systems. It is particularly useful for pulleys with a diameter ranging from 40mm to 85mm.

Product code: W0601

Puller for belt pulleys, three-arm with extended arms

Product code: W0070

Puller, pulley block Lexus GS, IS, SC; Toyota Supra IV

With its adjustable spacing between holes ranging from 66 to 68 mm, this tool is essential for various tasks involving pulley removal and installation.

Product code: W0684

Puller for belt pulleys, four-arm

Puller for belt pulleys, four-arm is a high-quality and efficient tool that makes belt replacement and maintenance easier. This extremely useful tool allows precise adjustment of the tension of the belts.

Product code: W0073

Universal puller (screw L=100mm, hole distance 27-62mm)

Product code: W0136

Slide hammer, diameter 70mm, weight 0.9kg, length 300mm

Product code: W0060

Slide hammer M12/16, ⌀85mm, weight 1,3 kg

A slide hammer can be a useful tool when installing or removing fasteners that are difficult to move or fit tightly. The large diameter and weight of the M12/16 slide hammer allows for greater impact force, which can more effectively drive in or squeeze out these elements.

Product code: W0048

Extra feet puller for beam puller (W0033)

This is a useful accessory, an extra puller for our product: Timing belt and injection pump pulley puller (W0033). Suitable for VW, Audi, Ford, Opel etc.

Product code: W0150

Puller for front control arm pins of Renault Master, Opel Movano

Product code: W0045

Power steering pump puller

This tool facilitates the safe removal of the power steering pump.

Product code: W0430

Adapter to remove the pins down on the Renault Master 2006

Product code: W0160

Puller for wheel hub / bearing rear swingarm Mercedes Vito Viano 2.2 CDI after 2003

This puller is designed to safely and efficiently separate the wheel hub or bearing from the swingarm assembly.

Product code: W0361

Puller for double-row wheel hub bearings

Puller for double-row wheel hub bearings. Mechanical kit to facilitate work with double-row front and rear axle bearings. The purpose of the puller is to safely remove this type of bearing from the wheel hub.

Product code: W0037

Tool for mounting the hub booster pumps

Tool for installing wheel hub booster pumps. Due to the universal nature of the tool, it is compatible with many wheel hub sizes and types, so it can be used for many vehicles.

Product code: W0433

Hub and Bearing Puller for Fiat Ducato and Citroen Jumper

This hub and bearing puller is specifically designed for Fiat Ducato and Citroen Jumper vehicles, allowing for the quick and efficient mounting and dismounting of hubs and bearings on the vehicle without the need to disassemble the suspension.

Product code: W0499

Universal sliding hammer hub puller, with 15 screws

Universal sliding hammer hub puller with 15 screws, ideal for removing seized hubs. The tool weighs 13kg and comes with three types of 5 screws for various applications. Size range: 90mm-155mm (±5mm), with an external flange dimension of 185mm.

Product code: W0002

Puller for wheel hub / bearing Ford Focus II, C-Max, Volvo, Mazda 3,-puller with ABS and without ABS

This tool is designed for the assembly and disassembly of wheel hubs and bearings on the car, compatible with both ABS and non-ABS systems.

Product code: W0305

Double-row bearing puller and wheel hubs II version (BMW, Mercedes etc.)

Product code: W0205

Bearing Hub Puller Renault Trafic , Opel Vivaro 2.0 DCI

Bearing Hub Puller for Renault Trafic and Opel Vivaro 2.0 DCI models. Designed for efficient removal of wheel hubs during maintenance.

Product code: W0487

Puller for wheel hub / bearing VW Polo, Seat, Skoda, Audi A2-puller with ABS and without ABS

This puller is specifically designed to handle wheel hubs and bearings on VW Polo, Seat, Skoda, and Audi A2 vehicles. Whether your vehicle is equipped with ABS or without ABS, this versatile tool ensures a secure grip and effortless removal.

Product code: W0306

Puller hub / bearing Mondeo IV; Focus II RS (FORD 1 463 833)

This tool is designed for the assembly and disassembly of the front hub and bearing on Ford Mondeo IV and Focus II RS vehicles.

Product code: W0506

Tool for hub removal (set of 15 screws)

Tool for hub removal – cars of A, B, C class and others. Set of 15 screws.

Product code: W0072

Hub Puller VW, Seat, Skoda-Puller with ABS and without ABS

The tool is suitable for removing the wheel hubs of both vehicles with and without ABS. Therefore, it can be widely used when servicing VW, Seat and Skoda models. The tool fits exactly on the hub and provides the right grip to pull the hub off efficiently and safely.

Product code: W0163

Puller for wheel hub / bearing with and without Abs - Ford Mondeo, Focus, C-Max, Mazda 3, Volvo C30 C70 S40 V50

The wheel hub/bearing puller allows you to install and remove the hub/bearing on the car without removing the ABS sensor.

Product code: W0359

Press, puller for bolts (W0027, W0102, W0116), Mercedes, VW, Opel etc.

Product code: W0133

Press, puller for bolts of suspension arms Opel, Renault, Nissan

Press, puller for upper and lower ball bolts of the suspension arms in Master, Movano, Interstar.

Product code: W0100

Adapters for press, puller for bolts, Master, Movano, Interstar

Adapters for press, puller for bolts, Renault Master, Opel Movano, Nissan Interstar

Product code: W0098

Slide hammer for injector pulling, weight 2.5kg, M12/M16

Slide hammer for injector pulling, weight 2.5kg, M12/M16.

Product code: W0067

Press for dismantling and mounting of lower bolts, IVECO

Product code: W0115

Press, puller for bolts, strengthened (W0027, W0102)

Press, puller for bolts, strengthened (W0027, W0102) Mercedes Sprinter, Renault Master, Opel Movano, Nissan Interstar, VW T4. The set includes a press and a puller, which have a combined function. The reinforced design and durable materials ensure a reliable and long service life. The set contains the necessary accessories and adapters for different types of vehicles, so that it can be widely used during work.

Product code: W0134

Adapter for removing bolts VW Crafter, Mercedes Sprinter 906

Adapter for removing bolts in VW, Mercedes upper and lower control arms. The adapter is to be used with W0027, W0133, W0134 etc.

Product code: W0141

Press, puller for bolts Renault Master / Opel Movano

Press, puller for bolts Renault Master / Opel Movano + W0160 adapter

Product code: W0161

Set of adapters for dismantling and mounting of lower bolts, IVECO

The adapter kit is precisely engineered and durable, and allows reliable and efficient removal and installation of lower suspension bolts. Designed to IVECO vehicle specifications to fit perfectly with the lower suspension bolts and allow smooth and safe operations.

Product code: W0116

Adapters for press, puller for bolts, Renault Master, Opel Movano

Adapters for press, puller for bolts, Renault Master, Opel Movano. It cooperate with W0027 and W0045 presses.

Product code: W0046

Hollow hydraulic cylinder 20t

Hydraulic cylinder with through and threaded hole. It can be used with various types of mechanical presses that are designed for the extraction of metal and rubber silents, pins, joints, etc.

Product code: C07/0112

Hollow hydraulic cylinder 12t

Hydraulic cylinder with through and threaded hole. It can be used with various types of mechanical presses that are designed for the extraction of metal and rubber silents, pins, joints, etc.

Product code: C07/0098

Mercedes Smart Hub Pressing Adapter Set

Hub pressing adapter set for Mercedes Smart vehicles, designed for precise and efficient hub installation and removal.

Product code: W0575

Wrench / Cap for loosening the wheel hub nut IVECO DAILY 55s17 4x4 REAR (oe nuts 42558514)

Wrench/Cap for loosening the rear wheel hub nut on IVECO Daily 55s17 4x4, compatible with OE nut 42558514.

Product code: W0622

Puller hub bearing the brake disc Ford Transit

The puller hub bearing the brake disc is a special tool used for mounting and dismounting brake disc bearings on Ford Transit vehicles.

Product code: W0500

Bearing separator set

Bearing separator set, capacity: 75-105mm, 1 separator, 1 main rod, 4 pcs extensions

Product code: MG50134

Bearing separator set

Bearing separator set, capacity: 15-58mm, 1 separator, 1 main rod, extensions

Product code: MG50461

Bearing separator, 30-50mm

Bearing separator, capacity 30-50mm

Product code: MG50132-1

Camshaft drive belt pulley puller for VW, Audi

Camshaft drive belt pulley puller for VW, Audi, 17mm and 23mm puller arms

Product code: MG50329

Puller for pins 20mm inner height 70mm width 66mm

Puller for pins and studs 20mm inner height 70mm width 66mm (hardened, with a single material)

Product code: W0203

Puller to the hub / bearings VW T5

Product code: W0129

Hydraulic cylinder to the pullers, press and injectors - 15 Ton

With a 15-ton pressing force, this hydraulic cylinder delivers exceptional power to handle tasks. Whether you need to remove stubborn parts, press components together or work with injectors, this cylinder provides the necessary force to get the job done efficiently.

Product code: W0432

Bearing and gear puller with 3 jaws. Working range: up to 8" (203mm)

Bearing and gear puller with 3 jaws. Working range: up to 8" (203mm). The puller enables the removal of bearings (internal and external) from various types of shafts and houses.

Product code: G02244

Bearing and gear puller with 3 jaws. Working range: up to 3" (75mm)

Bearing and gear puller with 3 jaws. Working range: up to 3" (75mm). The puller enables the removal of bearings (internal and external) from various types of shafts and houses.

Product code: G02230

Bearing and gear puller with 3 jaws. Working range: up to 4" (102mm)

Bearing and gear puller with 3 jaws. Working range: up to 4" (102mm). The puller enables the removal of bearings (internal and external) from various types of shafts and houses.

Product code: G02242

Tool Tray 1/6: Rim Lock Socket Set for VAG, 23pcs

23-piece rim lock socket set for VAG, 17mm hex drive, in 1/6 tool tray, made of chrome molybdenum steel.

Product code: BGS-8933

Tray 1/6: Rim Lock Socket Set for BMW, 20pcs

20-piece BMW rim lock socket set with 17mm hex drive, organized in 1/6 tool tray.

Product code: BGS-8962

Tool Tray 1/6: Rim Lock Socket Set for Mercedes-Benz, 12pcs

12-piece rim lock socket set for Mercedes-Benz, includes 10 sockets, holder, and punch pin in 1/6 tool tray.

Product code: BGS-9338

Tool Tray 1/6: Rim Lock Socket Set for Mercedes-Benz, 35pcs

35-piece rim lock socket set for Mercedes-Benz, with 32 OEM-type sockets, holder, punch pin, and hub hook puller in 1/6 workshop tray.

Product code: BGS-9469

Tool Tray 1/6: Rim Lock Socket Set for BMW, 21pcs

21-piece rim lock socket set for BMW, 17mm hex drive, in 1/6 tool tray, made of chrome molybdenum steel.

Product code: BGS-8932

Tool Tray 1/6: Rim Lock Socket Set for VAG, 20pcs

20-piece VAG rim lock socket set, 17mm hex drive, in 1/6 tool tray.

Product code: BGS-8963

Blind Hole Bearing Puller Set with Slide Hammer, 5pcs

5-piece puller set for removing bearings and bushings from blind holes. Includes slide hammer.

Product code: BGS-8598

External / Internal Puller Set, 2 and 3-arm, 13pcs

13-piece puller set with interchangeable 2- and 3-arm setup, internal and external use, puller depth up to 265 mm, includes two spindles.

Product code: BGS-7760

Hydraulic Puller Set, 10t, 25pcs

25-piece hydraulic puller set with 10-ton ram, twin and triple heads, multiple leg lengths, and adjustable pulling widths up to 300 mm.

Product code: BGS-7729

External/internal 3-arm puller, 50–300mm

3-arm external/internal puller 50–300mm, forged steel, ball tip, for large bearings, gears, pulleys, and rotors.

Product code: BGS-7700

Splitting knife set for ball bearing assemblies, 14pcs

14-piece splitting knife set for ball bearing removal, multiple clamping ranges, includes shifter, precision extraction of tightly mounted components.

Product code: BGS-7750

Bearing puller set, 10pcs

10-piece bearing puller set with interchangeable heads Ø5.5–8mm, clamping width 20–100mm, max. puller depth 200mm.

Product code: BGS-7744

Splitting knife set for ball bearing assemblies, 9 pcs

9-piece set for removing small bearings, sleeves and gears from shafts. Includes separator, jaws, spindle, and extensions.

Product code: BGS-74569

External / internal puller set 2/3-legs 100/120/150mm, 3pcs

3-piece external/internal puller set, 2- and 3-arm design, 100/120/150mm capacity, forged steel, with ball tip.

Product code: BGS-6792

External/internal 3-arm puller, 30–150mm

3-arm external/internal puller 30–150mm, forged, ball tip, hex drive 17mm, clamping depth 155mm.

Product code: BGS-7698

External/internal 3-arm puller, 40–210mm

3-arm external/internal puller 40–210mm, forged, ball tip, hex drive 19mm, clamping depth 225mm.

Product code: BGS-7699

External/internal 2-arm puller, 15–120mm

2-arm external/internal puller 15–120mm, forged, reversible, galvanized, hex drive 14mm, clamping depth 75mm.

Product code: BGS-7713

Belt Pully Wrench for V-Belt Pulleys

Universal belt pulley wrench with 850mm strap, for V-belt pulley installation and holding, 568g.

Product code: BGS-1024

Toothed Belt wheel Puller, universal

Universal toothed belt wheel puller with 8-slot adjustable legs, Ø16mm spindle with centering ball, 24mm drive, 18mm pulling legs.

Product code: BGS-8273

Camshaft Sprocket and Ribbed Drive Puller, 42 - 82 mm

Camshaft sprocket and ribbed drive puller, adjustable 42-82mm, 27mm pulling depth, with 3 pulling arms, puller body, and spindle.

Product code: BGS-8964

Belt Pulley Wrench for Ribbed and Flat Drive Belts

Wrench for holding ribbed or flat drive belt pulleys during disassembly, 572g.

Product code: BGS-1026

Crankshaft pulley puller for Ford 2.0 Ecoblue TDCi

Crankshaft pulley puller for Ford 2.0 Ecoblue TDCi engines with specific codes, compatible with Transit and Custom models from 2016 onward.

Product code: BGS-70924

Pole terminal and wiper arm puller, 2-arm

2-arm puller for removing wiper arms and battery terminals, adjustable and compatible with many vehicles and trucks.

Product code: BGS-70001

Pole Terminal and Wiper Arm Puller, 2-arm

2-arm puller for battery terminals and wiper arms, adjustable from 10 to 35mm. Fits most cars and trucks. Durable steel design with sliding handle.

Product code: BGS-97743

Windscreen wiper arm puller, universal

Universal windscreen wiper arm puller, 360° rotatable arms, brass pressure sleeve, handwheel operation, no tools required.

Product code: BGS-7798

Stud extractor set 6–12mm, 4pcs

4-piece stud extractor set in 6–12mm sizes, 1/2" drive, made of chrome vanadium steel.

Product code: BGS-1882

Brake drum extractor / drive shaft push-out tool, 5-legs, universal

Universal 5-leg tool for extracting brake drums and pressing out drive shafts; fits up to 6-hole hubs, max Ø200mm.

Product code: BGS-7682

Blind Hole Bearing Puller Set, 16pcs

16-piece bearing puller set for extracting bearings from blind holes, ideal for gearbox repairs, includes slide hammer and spreader claws.

Product code: BGS-7715

Blind Hole Bearing Puller Set, 15pcs

15-piece puller set for removing bearings from blind holes, ideal for gearbox repairs and other tight-fit applications.

Product code: BGS-70108

Inner bearing puller set. For diameters: 10-32mm

The internal bearing puller designed for dismounting internal bearings with an internal diameter of 10-32mm.

Product code: G02747

Parallel puller, 2-arm, 19–35mm

2-arm parallel puller 19–35mm clamping width, for bearings, gears, rotors; chrome vanadium steel, drop-forged, hex drive 12mm.

Product code: BGS-74521

Parallel puller, 2-arm, 24–55mm

2-arm parallel puller 24–55mm clamping width, for bearings, gears, rotors; drop-forged chrome vanadium steel, hex drive 12mm.

Product code: BGS-74522

Front bearing hub extractor for VW Lupo, Audi A2 1.2 TDI

This Front Bearing Hub Extractor is a specialized automotive tool designed to facilitate the installation and removal of the front bearing hub on specific vehicle models, particularly the VW Lupo and Audi A2 with 1.2 TDI engines. This tool is engineered to make the process more efficient and to minimize the risk of damage to critical components such as the ABS sensor.

Product code: W0740

Special Sockets for BMW Rim Locks, 3pcs

3-piece set of chrome molybdenum steel special sockets for BMW rim locks with different tooth and size specifications.

Product code: BGS-5285

Bearing and gear puller with 3 jaws. Working range: up to 12" (305mm)

Bearing and gear puller with 3 jaws. Working range: up to 12" (305mm). The puller enables the removal of bearings (internal and external) from various types of shafts and houses.

Product code: G02235

Hydraulic jaw puller set 20t

Multi-function puller with adjustable two or three leg function. Allows bearings, gears, etc. to be easily removed with minimal effort by use of the hydraulic puller.

Product code: G00912

Adjustable timing pulley remover 42 - 82mm

Product code: CKBA2213

Bushing and seal driver set 40-81mm 10 pcs

The set is used for bearings, sealants, bushings, etc. 40, 44, 50, 59, 63, 65, 72, 76, 81mm

Product code: CKB04270

Bush, bearing and seal driver set 52pcs

Bush, bearing and seal driver set 52pcs. Discs: 18 - 65mm and 74mm

Product code: CKBB1035

Internal bearing puller set

Internal bearing puller 10-32 mm. A professional set, necessary in every workshop.

Product code: CKB04004

Internal bearing extractor set. Diameters: 8-58mm

Precision puller for tight-fitting, internal bearings and bushings.

Product code: G02577

Hydraulic hose crimping tool set

Set contains the hand-operated hydraulic crimping tool, four sets of dies for standard fittings and four sets of dies for reduced barrier fittings.

Feature	Specification
Drive profile	Sliding handle
Width	98mm
Hook foot thickness (top)	3mm
Hooked foot	6mm
Hook length	16mm
Height	41mm
Length	170mm
Clamping depth	37mm
Max. clamping width	30mm
Spindle length	105mm

Delivery method	Net price
Pickup in Nagytarcsa	0,00 €
Pickup in Debrecen	0,00 €
DHL Worldwide Express	48,56 €

Pole terminal and wiper arm puller, 2-arm

Product code: BGS-70001

Brand: BGS

Product description

Technical data

Product packing

Delivery fee

More products in this category

2-jaw and 3-jaw gear puller set

Product code: MG04J1125

Bearing puller 24-55mm

Product code: MG93363

Bearing puller set, 14pcs

Product code: DK-230589

Bearing puller set, 9pcs

Product code: DK-230590

Hydraulic bearing puller kit, 10T

Product code: DK-230584

Ribbed crankshaft/auxiliary pulley removal tool, 45-165mm

Product code: MG91547

Timing belt and injection pump pulley puller

Product code: W0033

Wiper arm removal tool

Product code: MG04J1233

Universal wiper arm puller

Product code: W0123

Bearing and seal drive-in set, 10 pcs

Product code: MG04J1040

Hardened M12 nut with bearing for pullers

Product code: W0149

Internal bearing puller set, 12-32mm

Product code: MG50140

3-Jaw Internal & External Puller Set

Product code: MG04J1011

Universal puller set

Product code: MG50131

Front wheel drive kit, 55.5-91mm, axle 380mm

Product code: MG50405

Hydraulic wheel hub puller 10T

Product code: MG04B1044B

Wheel bearing removal/installation tool set 50-88mm

Product code: MG50075

Upper control arm central bolt puller for VW, Audi after 2005

Product code: W0164

Windshield wiper arm/battery terminal puller, capacity 25-43mm

Product code: MG50151

Stud extractor set, 4pcs

Product code: MG93264

Stud extractor, 1/4"-3/4"

Product code: MG50047

Crankshaft pulley puller VW / Audi 4 and 5 cylinder

Product code: W0173

Pulley puller three-armed 40-85mm with elongated arms

Product code: W0605

Puller for belt pulleys, four-arm, 60mm

Product code: W0089

Puller for belt pulleys, three-arm

Product code: W0068

Puller to the wiper arms - universal 50x40

Product code: W0119

Slide hammer, weight 1kg, M12/M16

Product code: W0065

Slide hammer, weight 1.5kg, M12/M16

Product code: W0066

Internal bearing puller ⌀35mm

Product code: W0291

Universal AC clutch remover

Product code: W0013

Rocker pin puller and press for T4, Master, Movano, Interstar, Sprinter, VW LT

Product code: W0093

Press, puller for bolts of suspension arm, front Master/Movano/Interstar

Product code: W0097

Adapters for press, puller for bolts, Master, Movano, Interstar

Product code: W0102

Press and puller for ball joints Renault, Opel, Iveco, VW, Nissan, Mercedes etc., 20 adapters

Product code: W0162

Adapters for press, puller for bolts VW T4, LT, Mercedes Sprinter

Product code: W0147

Press for silents and ball joints, for VW T4, Mercedes Sprinter, VW LT

Product code: W0027