MIG-MAG/FLUX/BRAZING/MMA/TIG Electromig 400 Synergic welder, 230V/400V

• This welding machine is a source of current for arc welding, made specifically for MAG welding carbon steel or weak alloys with CO2 protective gas or Argon/CO2 mixes, using tubular full or core electrode wires. It is also ideal for MIG welding stainless steel with Argon gas containing + 1-2% oxygen and aluminium and CuSi3, CuAl8 (brazing) with Argon gas, using electrode wires that are suitable for the workpiece to be welded.
• It is particularly suitable for light metalwork fabrication and in body shops, for welding galvanized plates, high stress stainless steel and aluminium. SYNERGIC operation ensures fast and easy welding parameter setting, always guaranteeing high arc control and welding quality.
• The welding machine can be used for TIG welding in direct current (DC), with arc striking upon contact (LIFT ARC mode). It welds all types of steel (carbon, low- and high-alloy) and heavy metals (copper, nickel, titanium and their alloys) with a gas shield of pure (99.9%) Ar or, for special uses, with an Argon/Helium mix.
• It can also be used for MMA electrode welding in direct current (DC) using coated electrodes (rutile, acid, basic).

Key Features

• Flexible use with various welded materials (steel, stainless steel, aluminium) or brazed materials (galvanised sheet metal). Wide variety of application fields, from industry to maintenance, installation to bodywork activities. Synergic adjustment makes the product simple to use. The Made in Telwin ATC technology makes it easy to achieve excellent standards of welding on thin materials thanks to state-of-the-art control of the arc.
• Manual or synergic operating.
• 40 pre-set synergic curves.
• Possibility of creating, saving and retrieving customised welding programs.
• MIG-MAG adjustments: wire up slope, electronic reactance, wire burn-back time, post gas, wire speed correction
• 2/4 time operation selection, Bi-Level, spot, inch and mm material thicknesses
• Adjustments in MMA: hot start, arc force, anti-stick
• VRD device
• Ample, immediate and easy reading LCD display.
• Protections: thermostatic, overvoltage, undervoltage, overcurrent, engine driven generator (+/-15%)
• TIG Lift
• Complete with MIG-MAG torch (MT36, 3m), cable and earth clamp.

The ATC (Advanced Thermal Control) technology

The Made in Telwin ATC technology is designed for use in specific sectors such as, for example, car bodywork where the materials (with thin materials measuring from 0.5-0.8 mm) are extremely sensitive to deformation caused by the temperatures reached during welding operations. 

The ATC technology makes it easy to achieve excellent standards of welding on thin materials thanks to state-of-the-art control of the arc.

Advantages

• Easy welding of thin materials
• Decreased deformation of material
• Extremely stable arc even whenworking with low currents
• Rapid and accurate tack welding
• Easier coupling of spaced sheets
• Excellent results on steel, aluminium and during brazing operations

MIG-MAG
Operating modes:
- manual
- synergic (automatic)
- Wire speed, welding current and voltage shown on the display.
- 2T, 4T, 4T Bi-level, Spot operation selection.
2T: Welding begins when the torch push-button is pressed and ends when the push-button is released.
4T: Welding begins when the torch push-button is pressed and released, and ends only when the torch push-button is pressed and released a second time. This mode is useful for long welding operations.
4T Bi-level: Welding begins when the torch push-button is pressed and released. Each time it is pressed/released it switches from current (I2 symbol) to current (I1 symbol) and vice-versa. It only terminates when the torch push-button is pressed for a certain set time.
Spot: Used for MIG/MAG spot welding with control of welding duration.
- Adjustment options: wire up slope, electronic reactance, wire burn-back time, post gas
Electronic reactance: Adjusting the reactance during MIG/MAG welding allows you to fine-tune the inductance of the welding circuit. By adjusting the reactance, the welder can optimize the behavior of the welding arc when welding different material thicknesses and types, improving the quality of welding and facilitating the welding process. Settings from - 50 % (low reactance machines) to + 50 % (high reactance machines). Factory value: 0 %
Wire upslope: This setting allows you to gradually increase the speed of the welding wire at the beginning of welding. This helps reduce welding errors such as excessive penetration or spatter when the arc is struck, ensuring a smoother start and transition in the welding process.
Wire burnback time setting: This setting controls the amount of time the wire can "burn back" after welding is complete before it automatically stops. Setting the proper burnback time ensures that the wire does not burn back too short, making it easier to start the next welding cycle. Settings from - 10 % to + 10 %. Factory value: 0 %.
Post-gas setting: This function controls the amount of time that shielding gas continues to flow after welding is completed to protect the still-hot weld from airborne contaminants until it cools down. Settings from 0 to 10 seconds. Factory value: 1 sec.
Wire speed correction: It increases or decreases the wire feed speed according to the display. Adjustment from -5 to +5m/min. Factory value: 0 m/min.

TIG
- Start LIFT: The electric arc is struck by moving the tungsten electrode away from the piece to be welded. This strike mode causes less electrical-radiation disturbance and reduces tungsten inclusions and electrode wear to a minimum.
- Wire speed and welding current shown on an LCD screen.

MMA
- Arc force: This helps maintain a stable arc even in difficult conditions, such as dense welds. With the Arc Force function, the inverter automatically adjusts the current depending on the length of the arc. If the arc accidentally touches the workpiece, the current increases, so it does not stick. If the two are too far apart, the current will be reduced and the arc will not extinguish.
- Hot start: It helps to ignite the arc more easily by automatically increasing the current at the beginning of the welding process. This can be especially useful for difficult-to-ignite electrodes. Facilitates arc ignition for materials that are too cold or too thick.
- Anti-stick: Prevents the electrode from sticking to the workpiece, reducing the current connected to the electrode when it detects sticking. This makes it easier to remove the electrode and reduces the risk of overheating.
- VRD device: Improves safety during welding operations. The VRD (Voltage Reduction Device) function allows to decrease the output voltage, increasing the operator’s safety when working in humid or particularly dusty environments.
- Wire speed and welding current shown on an LCD screen.

PROTECTION
- Thermostatic safeguard: A heat-sensing system that shuts down the machine if the temperature rises too high, preventing overheating.
- Protection against accidental short-circuits caused by contact between torch and earth.
- Protection against irregular voltage (power supply voltage too high or too low).
- Anti-stick (MMA).

STANDARD ACCESSORIES
- MIG-MAG torch
- Return cable complete with earth clamp
- Torch holder support

Specifications