Crankshaft rear oil seal replacement tool for Iveco, Fiat, Citroen, Peugeot 3.0

3” Piston Ring Compressor

A 3" piston ring compressor is essential when it comes to engine repair. It can be used to connect the piston with rings, and also helps to secure the piston to the engine body. Allows pistons to be assembled without damaging the piston rings.

VW Crankshaft Sealing Flange Removing and Installing Tool (Petrol)

This crankshaft seal installer tool is designed for Volkswagen, Audi, Skoda 16v 1,4, 1,6 engines and it’s also used on Fiat BAG 1,6 engines.

Piston ring groove cleaning tool set, 7 pcs

Quickly and reliably removes soot deposits from the groove. It has easily replaceable blades.

4“ Piston Ring Compressor

A 4" piston ring compressor is essential when it comes to engine repair. It can be used to connect the piston with rings, and also helps to secure the piston to the engine body. Allows pistons to be assembled without damaging the piston rings.

2“ PISTON RING COMPRESSOR

A piston ring compressor is essential when it comes to engine repair. It can be used to connect the piston with rings, and also helps to secure the piston to the engine body. Allows pistons to be assembled without damaging the piston rings.

Stretch belt tool set, 2pcs

A universal tool set for installing tension belts on modern vehicles, which does not damage the belt or the pulley.

Leak tester for cylinder head gasket

CO2 Combustion leak detect. This tool is designed to check for the leaks between combustion and cooling system of water-cooled engines. With 3 adapters.

Engine Block Stethoscope

It is indispensable for almost every workshop. It can be used to reveal hidden errors in the engine. Its use is simple and comfortable. During its operation it amplifies noises so their source can be easily determined

Ignition coils puller set

Ignition coils puller set, VW: Bora, Golf, new Beetle, Passat Polo, Touran, Luppo, Phaeton, Sharan, Tuareg, T5

Piston ring pliers, 40-100mm

Designed for installing and removing piston rings. The jaws are designed to protect the piston ring from damage.

Piston ring pliers, 80-120mm

Designed for installing and removing piston rings. The jaws are designed to protect the piston ring from damage.

Piston ring pliers, 110-160mm

Designed for installing and removing piston rings. The jaws are designed to protect the piston ring from damage.

Timing belt tension meter

A two-sided scale allows measurements to be made from either side, showing the tension in Nm

Piston ring service tool set, 9pcs

This 9-piece piston ring service tool set simplifies engine maintenance, featuring 3 piston compressors, a ring expander, groove cleaner, and a master kit. Fits diameters 53-175mm.

Engine cylinder bore dial gauge set

Precision bore gauge set for measuring internal diameters from 50mm to 160mm with 0.01mm tolerance. Includes self-centering heads, 12 rods, spacer rings, and a durable case.

Universal pulley and fan clutch holder set

Designed specifically for the removal and installation of fan clutches and the rotation or restraint of camshaft pulleys. Adjustable jaw spread and interchangeable pins. Supplied in storage case.

Universal pulley and fan clutch holder set

This tool kit designed with grooved pins that hold the camshaft pulley firmly in place.

Stretch belt removal and installation tool set, 5pcs

This tool set is designed for the precise removal and installation of elastic or automatic stretching belts found in modern auxiliary propulsion systems, including alternators and servo-steering systems. Suitable for use with a variety of vehicle brands including BMW, Chrysler, Citroen, Ford, Iveco, Mazda, Mercedes, Peugeot, Volvo, and Fiat, among others.

Ignition coil puller tool for VAG engines

This Ignition Coil Puller is an indispensable tool designed for the proper removal of "pencil style" ignition coils on various VAG engines. It is specifically tailored for use with 4 cylinder 1.2, 1.4, 1.8, and 2.0 FSI/TFSI engines, making it a versatile tool for a wide range of applications.

Ignition coil puller tool for VAG engines

The tool is a specifically designed apparatus for the proper extraction of "pencil style" ignition coils from 4 cylinder 1.2, 1.4, 1.8, and 2.0 FSI/TFSI engines used in various VAG models.

Fan clutch remover for BMW

BMW fan viscous clutch remover. Double-sided holding tool with a spacing of 38mm and 44.5mm.

Rear crankshaft oil seal replacement tool for Iveco 3.0, Mitsubishi Fuso 3.0 Euro 5

Rear crankshaft oil seal replacement tool for Iveco 3.0, Mitsubishi Fuso 3.0 Euro 5

Crankshaft rear oil seal replacement tool for Iveco, Fiat 2.3

Crankshaft rear oil seal (gearbox side) replacement tool for Iveco, Fiat 2.3

Front crankshaft oil seal puller for Iveco, Fiat 2.3

This tool is designed to extract the front oil seal safely and efficiently without causing damage to the seal or the crankshaft.

Crankshaft front oil seal puller for Iveco 3.0

The crankshaft front oil seal puller is a specialized tool designed to remove the front oil seal without causing damage to the crankshaft or engine components.

Face mill for crankshaft, VW TDI 1.9, 2.5

Face mill for the crankshafts of VW TDI 1.9, 2.5 engines.

Viscous clutch wrench Mercedes Sprinter 3.0 V6 CDI

Viscous clutch wrench for Mercedes Sprinter 3.0 V6 CDI, 4.0 V8 CDI, 642 3.0 CDI.

Rear crankshaft rear oil seal replacement tool for 3.0 HPI / HDI engines

Rear crankshaft rear oil seal replacement tool for Iveco, Fiat Ducato, Peugeot Boxer, Citroen Jumper 3.0 HPI / HDI engines.

Crankshaft rear oil seal replacement tool for Iveco, Fiat Ducato 2.3 engines

Replacement tool for crankshaft rear oil seal tool for Iveco, Fiat Ducato 2.3

High energy ignition tester

The high energy ignition tester is used to check the strength and consistency of the spark produced by the ignition system. This can help diagnose problems with the system, such as a weak spark or misfire.

Chain link splitter tool set

Specially curated for chain drives and timing chains, this kit is tailored to handle a range of chains (from 420 to 630) with unparalleled accuracy. Accommodating various pin sizes.

Carburetor synchroniser and vacuum/pressure tester, 0-1bar

With this kit you can synchronize the values of up to 4 carburettors and fine tune and adjust them.

Oxygen sensor socket set

This kit allows quick and damage-free replacement of lambda sensors, which are an important part of exhaust gas treatment systems. Different sizes and types of keys ensure that all lambda probe types are suitable, maximizing flexibility and applicability.

Oxygen sensor socket 22mm, 3/8" square drive

This Oxygen Sensor Socket is a specialized tool designed for the removal and installation of oxygen sensors in vehicles equipped with computer-controlled engines. The built-in offset allows for more leverage on the socket in tight spaces by inserting a 3/8-inch square drive tool or breaker bar.

Oxygen sensor wrench with flexible handle, 22mm

This Oxygen Sensor Wrench is designed for the efficient removal and installation of oxygen sensors.

Oxygen sensor socket 22mm, 1/2" square drive

This Oxygen Sensor Socket is a specialized tool designed for the removal and installation of oxygen sensors in vehicles equipped with computer-controlled engines. The built-in offset allows for more leverage on the socket in tight spaces by inserting a 1/2-inch square drive tool or breaker bar.

Oxygen sensor socket 22mm, 8mm cut-out, 3/8" square drive

This Oxygen Sensor Socket is specifically crafted for the efficient removal and installation of oxygen sensors on vehicles with computer-controlled engines.

Oxygen sensor socket 22mm, 20mm cut-out, 3/8" square drive

This Oxygen Sensor Socket is specifically crafted for the efficient removal and installation of oxygen sensors on vehicles with computer-controlled engines.

Torque angle gauge with magnetic arm

Torque angle gauge with magnetic arm is a special tool used to measure the angle of rotation during torque tightening operations.

Torque angle gauge

The torque angle meter is a special tool used to measure the angle of rotation during torque tightening operations.

Diesel injector line socket flexi head wrench set (12-19mm)

Durable, flexible-head wrench set (12-19 mm) for diesel injectors, fuel lines, and hydraulics, with 220° flexibility and extra-long neck for hard-to-reach areas.

Diesel Camshaft Head Rebuild Kit for VAG, Porsche, Audi, Skoda

This kit is allows you to overhaul the camshaft and cylinder head on VAG, Porsche or Audi common rail diesel engines. It holds the camshaft in the correct position when installing it. Equivalent to the OEM tooling required to allow the camshafts to be correctly fitted into the cylinder head. This is necessary as the cylinder heads on these engines are designed with a camshaft retaining frame that splits from the cylinder head along the centre line of the cam bearing caps.

Universal timing belt tensioner and remover

The Stretch Belt Mate Kit help install or remove stretch belts. Stretch belts can be difficult to install or remove without the proper tools. Improper installation or removal of a stretch belt can cause damage to the belt or other engine components.

Cambelt tension wrench set, 14pcs

Cambelt tension wrench set with 13 interchangeable adapters, suitable for almost all types of vehicles.

Lambda probe tester and simulator

The lambda probe tester and simulator tests zirconia and titania lambda sensors and the ECU (engine control unit, which monitors the parts necessary for the proper operation of internal combustion engines for proper performance). Designed to accommodate 1, 2, 3, and 4 wire sensors, both heated and unheated, this versatile device takes your automotive diagnostics to the next level.

Vacuum and pressure gauge

Measuring range (pressure) 0.1bar, 14, 18mm coupling adapter

Ribbed belt remover and installer tool set, universal

Effortlessly remove and install ribbed belts with our universal tool set. Includes two tools - one for installation and one for removal. Compatible with Alfa Romeo, Audi, BMW, Chrysler, Fiat, Ford, Mercedes, Seat, Skoda, Smart, PSA, Volvo, VW. Save time and money.

Crankshaft seal removing and installing tool for VAG (2.5 diesel engines)

This tool is designed for the precise and safe removal and installation of the crankshaft seal on various VAG 2.5 diesel engines. It is an essential tool for mechanics and technicians working on compatible Volkswagen models, ensuring the correct alignment of the main seal housing and the crankshaft sensor.

Stud extractor set, 4pcs

This four-piece stud extractor set is a highly efficient tool designed for the quick and easy removal and installation of hard-to-reach studs.

Scraper Service Set

Scraper Service Set is a versatile tool kit designed for removing adhesives or paint from glass or metal surfaces.

Universal camshaft pulley holding tool, 21-100mm

Universal camshaft pulley holding tool, 21-100mm. For Mercedes Benz, Bmw, Ford, Mitsubishi, Honda, VW, Audi, Nissan, Toyota, Volvo, etc.

Face mill cutter for Fiat 1.4 16V shafts

This face mill is specially designed for cutting and preparing Fiat 1.4 16V engine shafts. The cutting diameter of the tool is 32 mm, which is the ideal size for machining the front surface of Fiat 1.4 16V engine shafts. Thanks to the M12x1 thread size, it fits easily to shafts with the appropriate thread.

Viscous clutch key for Mercedes Sprinter 3.0 V6 CDI

The Viscous Clutch Key for Mercedes Sprinter 3.0 V6 CDI engines is a specialized tool designed to remove and install the viscous clutch in the cooling fan assembly. This key provides a secure grip on the clutch, allowing for efficient and safe maintenance or replacement of this critical component.

The viscous clutch key Volkswagen LT 2.5 TDI

The viscous clutch key Volkswagen LT 2.5 TDI is a specialized tool designed to assist in the removal and installation of the viscous clutch unit.

Viscous clutch key Volkswagen Crafter 2.5 TDI

The Volkswagen Crafter 2.5 TDI viscous clutch wrench is a special tool that helps remove and install the viscous clutch unit. For Volkswagen Crafter models with a TDI common rail engine.

Timing belt tightener for VAG car engines

Timing belt tensioner wrench for VAG car engines.

BMW crankshaft pulley wrench (E39, E46, E60, E61, E81, E83, E90, E91)

Crankshaft pulley holding tool for BMW 3 and 5 Series. Holds the vibration damper when loosening or tightening the central crankshaft bolt.

Mercedes Benz M272 / M273 pulley unscrewing wrench

Pulley unscrewing wrench for Mercedes Benz M272 and M273 engines, designed for easy and precise removal of pulleys on V6 and V8 engines in various Mercedes models from 2004 to 2014.

Belt pulley wrench for BMW diesel engines

Belt pulley wrench for BMW diesel, E87, E46, E60, E61, E90, E91.

Fan wrench set, 5pcs

5-piece fan clutch wrench set for installation and removal of fan clutch components on various vehicle models.

Oil pump removal tool set for Range Rover Sport L494 diesel

Tool set for removing the oil pump on diesel Range Rover Sport L494 models.

Intake manifold wrench for VAG, 3/8" 12 pt 13mm

13mm intake manifold wrench (3/8" drive), equivalent to VAG T10535, for VW Group 1.4L 3-cylinder diesel engines.

Universal belt tensioner wrench set

Double ended: 12, 13, 14, 15, 16, 17, 18, 19mm

Valve pressure spring installer and remover tool for BMW N-series and PSA 1.6T engines

Valve spring tool for BMW/Mini N-series and PSA 1.6T engines, works without removing the cylinder head.

Universal camshaft bearing tool installation and removal set

Universal camshaft bearing tool set for easy installation and removal of camshaft bearings in various engine types.

VAG crankshaft rear oil seal installer tool set

A professional toolset for correctly installing rear crankshaft oil seals on VAG engines (VW/Audi 1.8T, 2.0T, 3.0 V6, 3.2, 4.2L). Includes precision-machined guides and thrust pieces to ensure a damage-free and accurate seal installation.

Car stethoscope

The car stethoscope is used for auscultation diagnosis. Eliminates sounds from other points than auscultated. 

Piston ring compressor pliers

Piston ring compressor pliers. Operating range: 110-160mm.

Camshaft timing chain tensioner for Audi, VW, Seat

Camshaft timing chain tensioner. For Audi and VW 1.8L Turbo I4, 2.7L Bi-Turbo V6, 2.8L V6 and 4.2L V8 engines.

Head gasket tester kit

Head gasket tester kit. Allows easy diagnosis and quick detection of head gasket failures.

Piston ring compressor 6"x90 to 175mm

Piston ring compressor 6"x90 to 175mm. Allows the assembly of pistons without damaging the piston rings.

Piston ring compressor tool set

Pliers are used to remove and install piston rings without the risk of damaging the components. Three bladed discs and a tool for cleaning the piston grooves from accumulated carbon deposits. The piston ring tensioning band helps to fit the piston into the cylinder.

Combustion leak tester fluid

Combustion leak tester fluid

Piston ring compressor 6", 60-175mm

6" piston ring compressor. Ø 60-175mm

Universal belt tensioner wrench set

Double ended: 12, 13, 14, 15, 16, 17, 18, 19mm

Piston ring compression set

Piston ring service tool set for install piston rings; 3 pcs piston ring plates/compressors; 1 piston ring expander; Piston ring groove cleaner; 3 blades

Leak tester for cylinder head gasket

CO2 Combustion leak detect. This tool is designed to check for the leaks between combustion and cooling system of water-cooled engines. With 3 adapters.

Lambda probe oxygen sensor socket set

Lambda (hot) end cap 22 mm x 50 mm, 1/2" square drive. Vacuum sensor and lambda probe (for low-seated probes) 22 mm x 30 mm, 3/8" square drive.

Ribbed belt remover and installer tool set, universal

Ribbed belt remover and installer tool set, for Alfa Romeo, Audi, BMW, Chrysler, Fiat, Ford, Mercedes, Seat, Skoda, Smart, PSA, Volvo, VW

Spark plug socket set hexagon, 12.5mm (1/2") drive, 14–21mm, 5pcs

5-piece spark plug socket set, 1/2" drive, sizes 14–21mm, includes rubber inlays and thin-walled socket for tight spaces.

Carburettor jet cleaning tool set, 16pcs

16-piece tool set for cleaning carburetor jets and welding nozzles, with brushes, needles, files, and storage box.

Exhaust gas temperature sensor special socket set (EGT / NOx), 6pcs

6-piece EGT/NOx sensor socket set, 13–17mm sizes in straight and offset design, for cars, vans, and trucks.

Universal pulley fan clutch holder

Designed to remove and install fan clutch and rotate or restrain the camshaft pulley. Adjustable jaw spread and interchangeable pins.

Crankshaft seal installing tool for VAG (petrol and diesel engines)

Special purpose tool for the precise installation of shim rings/shim ring housings with a speed sensor on the rear (transmission side) side of the crankshaft.

Rear crankshaft oil seal replacement tool for Iveco, Fiat, Citroen, Peugeot 3.0

Rear crankshaft oil seal replacement tool for Reinz, Erling, Glaser 13.65mm seals.

Ignition adjustment stroboscope lamp

This ignition adjustment stroboscope lamp is an important tool in car repair, especially for diagnosing and repairing problems related to the ignition system. A strobe light can be used to precisely adjust the mechanical or electronic glow system to match engine speed, resulting in greater fuel efficiency and improved performance.

Adjustable camshaft pulley holder, length 420mm

For tensioning or loosening the belt pulleys, adjustable opening 12-150mm.

Viscous Clutch Key Ford Transit 2.3 2.4 3.2 (2001 – 2006)

This viscous clutch key is specifically designed for tightening or loosening the viscous clutch on Ford Transit vehicles. It is an ideal tool for precise and efficient maintenance, ensuring the proper functioning of the clutch.

Water Pump Pulley Remover VW / AUDI

This tool is specifically designed for the removal of the water pump pulley during the timing belt replacement process.

Tool for fitting and removing stretch ribbed belts

This tool is a versatile and essential tool for fitting and removing stretch ribbed belts. This specialized tool is designed to simplify the process of working with stretch ribbed belts.

Viscous clutch wrench Mercedes Sprinter 906 218, 318, 418, 518 CDI

Viscous clutch wrench Mercedes Sprinter 906 218, 318, 418, 518 CDI

Universal camshaft pulley locking tool set, 4 pairs of bit adapters

Universal camshaft pulley locking tool set, 4 pairs of bit adapters.

Puller (32x1,25) To pull sprocket a chain and the sleeve damper crankshaft in the DKW SB 350, NZ 250, NZ 350, F8 other model

Crankshaft rear oil seal replacement tool for VW 1.4, 1.6, 2.0 TDI

Crankshaft rear oil seal replacement tool for VW, Seat, Skoda 1.4, 1.6, 2.0 TDI both petrol and diesel engines.

Face mill for VW, Seat, Skoda 1.9, 2.0, 2.4, 2.5, 3.3 V5, V6, V8 TDI, 5 guide pins

Face mill for VW, Seat, Skoda 1.9, 2.0, 2.4, 2.5, 3.3, V5, V6, V8, TDI injector seats. Includes 5 guide pins.

Variator wrench Audi A6 , A7 , A8 - 4.0 L TFSI

Variator wrench for Audi A6, A7, and A8 4.0L TFSI engines, designed for timing chain tensioning and precise adjustments during maintenance.

Face mill cutter for the shaft Porsche 911 G 2.7, 3.0 and 3.2

This face mill cutter is specifically designed for cutting and preparing Porsche 911 G 2.7, 3.0 and 3.2 engine shafts. Thanks to the M12x1.5 thread size, it fits easily on shafts with the appropriate thread.

Wrench for shaft belt pulley unscrewing, VW, Audi, Volvo

A special tool that can be used to unscrew the axle disc for VW, Audi and Volvo vehicles.

Wrench for loosening the shaft pulley Land Rover 2.0 TD, Rover 2.0 CDTi

The Wrench for loosening the shaft pulley is a specialized tool designed specifically for Land Rover 2.0 TD and Rover 2.0 CDTi engines.

Crankshaft rear oil seal replacement tool for VW 2.5 TDI engines

Crankshaft rear oil seal replacement tool for VW Crafter 5-cylinder diesel engines 2.5 TDI common rail (2006-2013).

Vacuum gauge and fuel pump pressure tester set with adapters

Measures vacuum up to 70cmHg and pressure up to 0.7bar. Fittings included for compatibility with most cars.

V-ribbed belt tool set, 5pcs

5-piece tool set for mounting and dismounting stretchfit V-ribbed belts without tensioners, fits various pulley sizes.

Ignition coil extractor set for VAG, 8pcs

8-piece VAG ignition coil extractor set for removing coils, connectors, and oil drain plugs; compatible with VW, Audi, Seat, Skoda engines.

Tensioner Pulley Wrench Set, 12-point, special Shape, 13 - 19 mm, 5 pcs.

5-piece 12-point tensioner pulley wrench set, 13–19mm, chrome plated Cr-V steel, 460mm long, 2270g.

Electronic Stethoscope

Electronic stethoscope with 6-way amplifier and color-coded probes for efficient noise source detection in vehicles.

Tool tray 1/6: face hole nut wrench for truck rear axles

Adjustable face hole nut wrench for truck rear axles, includes 3 pin pairs and 50–100mm spigot range.

Ignition coil extractor set for VAG, 4pcs

4-piece extractor set for VAG ignition coils, includes OEM-type tools T10094A, T10095A, T10166, and T40039 for safe removal on various engines.

Mechanics Stethoscope, 320 mm

320mm mechanics stethoscope with steel tip for detecting faults in engines, bearings, and moving components.

Electronic Stethoscope

Electronic stethoscope for fast noise diagnosis in engine components, with comfortable padded headset.

Cam belt tension gauge

The timing belt tension indicator can be used to adjust the timing belt movement in ranges of 1daN to 10daN. 

Slide hammer oil seals extractor

Slide hammer tool for extracting hydraulic steering rack control valve oil seals, preventing pinion damage during power steering system repairs. Manufactured by MSG Equipment.

Piston Ring Compressor Set

Complete tool set for piston ring cleaning, assembly, and compression. Includes tension bands, cleaner, pliers, and screwdriver.

Ignition timing lamp

A strobe lamp for setting the ignition angle is used to check and adjust the ignition timing of gasoline engines. 

Piston ring groove cleaning tool set 4pcs

For the removal of carbon deposits from piston ring grooves. Three six sided wheel cutters cover all standard size piston grooves.

Piston ring compressor, 3"x125

Piston ring compressor, 3"x125. Allows the assembly of pistons without damaging the piston rings.

Piston ring compressor, 4"x90 - 175mm

Piston ring compressor, 4"x90 - 175mm. Allows the assembly of pistons without damaging the piston rings.

Piston ring compressor 3", 53-175mm

3" piston ring compressor. Ø 53/175mm

Carburettor testing kit

A kit for testing the fuel pump carburettor and automatic gearboxes. It is used for the synchronization of car and motorcycle carburettors, 2T and 4T.