Waste oil heater, 22-30kW

Name: Waste oil heater, 22-30kW HP-125
Brand: Hiton
SKU: HP-125
Availability: BackOrder

Product code: HP-125

Brand: Hiton

Waste oil heater, for used vegetable, synthetic and mineral oils and used mineral oils (engine-, transmission-, hydraulic and HBO I, II, III heating oils)

Product description

Description

Suitable for following oils:
Vegetable oils
Used vegetable oils
Mineral oils
Used mineral oils (engine-, transmission-, hydraulic and HBO I, II, III heating ois)
Synthetic oils

Suitable for

Suitable for heating of industiral sites, warehouses, car shops, garages, agricultural buildings, cellars

Heating properties:

Two power settings
Protective cover
Protection against the oil leakage and ignition
Built-in control system
LED furnace damage indicator
High temperature-resistant steel furnace
Manual ignition
Radiates heat in all directions
Tank capacity 50l
At an emission of 50-70^oC air, the room (1000m³) is heated to a temperature of approx. 12^oC
Reinforced frame
Galvanized sheet, powder coated
Automatic switching

Technical details

Minimum heat output	22kW
Maximum heat output	30kW
Minimum oil consumption	1.85kg/h
Maximum oil consumption	2.55kg/h
Space capacity	max. 800m³
Air flow	1000m³/h
Voltage	230V
Current	0.6A
Required chimney diameter	150mm
Size	540x850x1370mm
Weight	90kg

Product packing

Pack number	Dimensions	Weight
1	86 x 60 x 160 cm	81 kg

Delivery fee

Delivery method	Net price
Pickup in Nagytarcsa	0,00 €
Pickup in Debrecen	0,00 €

Available accessories

Micro switch

The Hiton Microswitch accurately detects the condition of the stove and reacts at the desired time to ensure smooth operation.

Primary oil filter for HP-105-145R waste oil heater

The primary oil filter is an essential part of the HP-125-145R waste oil heater. This filter offers a solution that allows the cleaning of used oils, minimizing the build-up of combustion products and ensuring the long life of your heater.

Product code: HP125.034

Final oil filter for HP 105 - 145R wasted oil heaters

This special oil filter is located in the internal system of the heater and is a key part of the heating system.

Product code: HP105-145.ZK

Bimetal thermostat for HP-125 waste oil heater

These specially designed thermostats allow waste oil heaters to optimally control the temperature when burning wasted oil. Bimetal thermostats ensure accurate and reliable temperature regulation through the connection between their thermal sensitivity and the heating oil combustion process.

Product code: HP125.T15.90C

Gear motor for HP-105-145R waste oil heater

Gear motor for HP105, HP115, HP125, HP125.O, HP135, HP145, HP145R waste oil stoves.

Product code: HP105-145.RH

Flue kit 5 x 1m

This kit includes 5 x 1 meter long stainless steel pipes and 1 x chimney cap, which are perfect for HP-105, HP-115, HP-125, HP-125O, HP-130, HP-145 and HP-145R heaters.

Product code: HFK-150

Chimney system for waste oil heaters

This kit includes 5pcs, 1m long stainless steel pipes, a stylish chimney cap and two 45° elbows.

Product code: HFK-150A

Oil Feed Line HP 105-125.052

The product was developed for HP 105-125 waste oil heaters. The inlet pipe is used for the supply of oil, its combustion and the operation of the heater. The intake pipe is oil and heat resistant to ensure long life and reliable operation.

Product code: HP105-125.052

Cast iron burner ring for HP-105-135 waste oil heater

The cast iron burner ring is an accessory of the HP-105-135 waste oil heater. It efficiently transmits the thermal energy from combustion.

Product code: HP125.054

More products in this category

Waste oil heater, 8-30kW, galvanized

This heater is intended for heating industrial premises not covered by the central heating system.

Product code: LS-105G

Waste oil heater, 8-30kW, black

This heater is intended for heating industrial premises not covered by the central heating system.

Product code: LS-105B

Waste oil heater, 22-30kW

Waste oil heater, for used vegetable, synthetic and mineral oils and used mineral oils (engine-, transmission-, hydraulic and HBO I, II, III fluids).

Product code: HP-125O

Waste oil heater, 17-33kW

This heater is intended for heating industrial premises not covered by the central heating system.

Product code: LS-125N

Waste oil heater, 22-30kW

Waste oil heater, for used vegetable, synthetic and mineral oils and used mineral oils (engine-, transmission-, hydraulic and HBO I, II, III heating oils)

Product code: HP-125

Waste oil heater, 30-52kW

This heater is intended for heating industrial premises not covered by the central heating system.

Product code: LS-145

Waste oil heater, 30-42kW

Modern recycling of superfluous vegetable, mineral and synthetic oils. Power 30-42kW. For supplementing or wholly replacing heating, connection possible to create central heating. Overheating and fuel overflow protection

Product code: HP-145

Waste oil heater, 30-42kW

Modern recycling of superfluous vegetable, mineral and synthetic oils. For supplementing or wholly replacing heating, connection possible to create central heating. Overheating and fuel overflow protection

Product code: HP-145R

Waste oil heater with CH and HW, 39-55kW

Modern recycling of superfluous vegetable, mineral and synthetic oils. Power 39-55kW. For supplementing or wholly replacing heating, connection possible to central heating system and hot water system. Overheating and fuel overflow protection

Product code: HP-145-WH

Waste oil heater with CH, HW and active cooling system, 39-55kW

Product code: HP-145.R-WH

Exhaust gas economizer, 6.5KW, 270m³/h

This exhaust gas economizer is allowing the recovery of up to 40% of the heat escaping to the chimney. Two-way hot air outlet.

Product code: LS-ECO65

Exhaust gas economizer, 12.7KW, 450m³/h

This exhaust gas economizer is allowing the recovery of up to 40% of the heat escaping to the chimney. It has two-way hot air outlet.

Product code: LS-ECO127

Recuperator

Recuperator for heat recovery, capable for recovering up to 30% of the heat streaming out of the chimney, substantially saving on heating costs. The heat can be directed, diverted with the ventilator

Product code: HP-135 C50

Flue kit 5 x 1m

This kit includes 5 x 1 meter long stainless steel pipes and 1 x chimney cap, which are perfect for HP-105, HP-115, HP-125, HP-125O, HP-130, HP-145 and HP-145R heaters.

Product code: HFK-150

Chimney system for waste oil heaters

This kit includes 5pcs, 1m long stainless steel pipes, a stylish chimney cap and two 45° elbows.

Product code: HFK-150A

Bimetallic thermostat

Designed to optimize and regulate the burning efficiency of used oil stoves, this bimetallic thermostat ensures that your stove maintains a consistent temperature, ensuring both safety and performance.

Product code: HP105-145.T12

Oil pump HP-105-145R for used oil stoves

Designed for tired oil stoves, for efficient and safe transfer of fuel.

Product code: HP105-145.050

Combustion chamber lid

The lid seals the combustion chamber, where the waste oil is burned. The combustion chamber lid in a waste oil heater is a key component designed to ensure safe, efficient, and effective operation of the heater.

Product code: HP135.038

Vaporizer pan

Vaporizer pan for waste oil heater

Product code: HP-125-053

Burner plate

A burner plate is a component used to burn waste oils or other similar materials to produce thermal energy. The burner plate is therefore a defining element of wasted oil heaters.

Product code: HP145.053

Bimetal thermostat for HP-125 waste oil heater

Product code: HP125.T15.90C

Oil Feed Line for HP 145,145R waste oil heater

It is an important element in promoting the efficient and reliable operation of the heating system. It is specifically deigned to use for the HP-145 waste oil heater.

Product code: HP145.052

Bimetallic Thermostat for HP-145, 145R waste oil heater

Product code: HP145.T15.110C

Primary oil filter for HP-105-145R waste oil heater

Product code: HP125.034

Oil Feed Line HP 105-125.052

Product code: HP105-125.052

Gear motor for HP-105-145R waste oil heater

Gear motor for HP105, HP115, HP125, HP125.O, HP135, HP145, HP145R waste oil stoves.

Product code: HP105-145.RH

Micro switch

The Hiton Microswitch accurately detects the condition of the stove and reacts at the desired time to ensure smooth operation.

Product code: HP105-145.VT

Final oil filter for HP 105 - 145R wasted oil heaters

This special oil filter is located in the internal system of the heater and is a key part of the heating system.

Product code: HP105-145.ZK

Cast iron burner ring for HP-105-135 waste oil heater

The cast iron burner ring is an accessory of the HP-105-135 waste oil heater. It efficiently transmits the thermal energy from combustion.